I am trying to resize an A4 immage so that it will print on 4 A4 sheets, making it an A3. I have tried but I did'nt manage to do it, it resized it back to A4.
View 1 Replies
When I went to make my business cards, I had the settings at 2in x 3.5in 300dpi in GIMP.
When I go to print them as business cards using GimpLabels, you can only see the very top portion of my image. After switching the ruler settings to pxl (in the corner) I noticed my image is actually 2500 pixels by 3500 pixels. Obviously a business card is not that big. So... Is there anyway to easily scale this to the correct size?
I actually have about 10 different versions of this card I have to print.... So it would really suck if I'd have to go in an manually scale every one of them. It would be nice if GimpLabels would scale it itself you know?
If a picture can be resized to print in a different size? I am trying to print a 5x7 and I have scoured the tools in Gimp and even tried to do it through my printer to no avail!
View 5 Replies View RelatedWhy don't my photos have strong enough resolution to be printed? Even 4x6. I'm shooting with Canon70d. Would this be corrected by a setting on my camera, or is there an option in Lightroom that will allow me to resize my image in order to print a crisp and clear 8x10.
View 2 Replies View RelatedIs it possible to resize a 10x8 image (with people filling the 10" width) into a 8x8 image without squashing people?
Or if not resizing, is there a technique that people use to fill out the height part to make it square?
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
I seem to be having a very tough time dramatically resizing an image but keeping its quality.
I want to go from a 160X158 image to 32X32, how i can do this while retaining quality.
How can I resize a image and layer once I have created the image? When I print the image, it always come out the same size .
View 1 Replies View RelatedIs there a way to just splice my image up into 16 512x512 squares? like a tile set (which by the way I'm sure my math is screwed up on that so how many squares I need to cut out a 2048x2048 image for 4 on top and 4 on the sides that'd be great. I suck at math)
I tried copping and stuff but I can't seem to use the tools right. I wrote a lengthy detailed version of this but figured it was too much to read so I am editing/cutting all the details out
Also the resize part. nevermind I got it figured, I just had to resize the image and the canvas follows suit. I didn't know that, thought I had to resize canvas first then image like in photoshop.
When I construct a multi image contact sheet and send it to my printer the file is aborted. Mac Pro, 15 GB ram, OSX 10.6.8, Epson 7890. LR4.
View 2 Replies View RelatedWhen Rotating or Resizing an image I have recently run into an issue. This is new behavior so I think I either have something set incorrectly, or it came in with a recent re-install.
When Rotating or Resizing, and setting Clipping to Adjust, it always Crops the image.
In other words: If I were to attempt to stretch an image bigger than 1000x1000 to say 1500x1500 it appears to do all the correct calculations, and does stretch the image, but anything outside the original 1000x1000 disappears.
Likewise if I were to attempt to rotate an image that were say, 1000x1500, 90°, I would end up with a rotated image 1000x1000 in size, and transparent/background for the balance of the original 1000x1500 sized image.
I've tried uninstalling/reinstalling (it remembered all my settings, so I don't know how much good this might have done), setting the Clipping option to Clip, then Crop and back to Adjust again (also with no result).
I've been trying to resize an image and tried Gimp 2's interpolation method but nothing happened. I increased the size to 150% with 153 pixels (I think). Did I do something wrong or is Gimp just not good for interpolation?
View 3 Replies View RelatedI've recently started trying to learn how to use GIMP through making signatures, and for the past 2 weeks or so, it has been going fine.
Today, when attempting to resize the large image down to signature size, even though the preview shows a good quality render, after it scales the image loses all quality. Whats more, thinking it might just be a poor image, I tried to resize previously succesful images and got the same bad result.
Here are some screenshots showing pre / post scale [URL]...
Preview there is fine, and shows a good quality render (exactly what I'm looking for)
[URL]...
This is the result
I understand that the aspect box is unticked, but even with that selected the image became distorted
I have also tried cubic / Sinc, both resulting in blurry picture.
The most frustrating thing is that the preview shows that the picture can be made that small and retain it's quality, and up until now this has not been an issue.
I can't find a way to resize (make smaller) a clip that I have copied and pasted from another image. Here's a screenshot:
[URL].......
How to make the cat smaller?
I'm very new to this photo editing. Never used photo shop. Only slightly understand what a layer is and don't really know how they work.
Basically I want to take one image of a person looking at a computer screen and then on the computer screen I want to paste another image so it looks as though they're looking at the image.I have both images but how to cut, copy, paste and resize so that the image fits the screen.
For some reason I cannot print the whole of an image onto an A4 sheet of paper. I have 2 problems
a) I want the image to be exactly the size of the paper (with no margin). I have removed the margin from the printer dialogue and used the 'print size' command to make the image the right size for an A4 image. The print preview shows there's no margin, but the print still has a small margin.
I am losing about 10 columns of pixels from the left side of the image. Once again the whole image is shown in the preview, but the print has data missing. This still happens when I reduce the size of the image so that there's plenty of room on the paper.
I am making some new business cards in Gimp 2.6.11 on Windows OS. What is the best way to place the card image onto a format that prints a sheet of Avery labels? Is that an external plugin? Where would I find that resource?
View 5 Replies View RelatedWhen I scan an image, in this case a standard A4 size, and do modifications with Gimp I am making progress in getting a reasonably good result but when I try to print out the final image I would like it to be precisely the exact same size as the original . As it turns out the scan becomes slightly smaller than the original and when I print to A4 paper I get an ugly border. which is either a hard line paper edge or slightly contrasting color (not the pure white original border around my picture).
How to change the size of the image once my scanner puts it into Gimp so that it will correspond with the original, or even overlap by a tiny amount, to eliminate the awful edges. Do I adjust the size of the canvas or the image, or both, and if so what are the tools to use. I've tried some Gimp tools that say they adjust the size of the image but they seem to shrink it in relation to the canvas instead of expanding it. Intuitively, since the image consists of pixels, it would seem there should be a simple way to increase the spaces between all the pixels so that the image increases in size. However I'm discovering that Gimp can be quite counter intuitive.
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
I've been trying to print an image I made with GIMP in cyan colour, but the printer prints it in green. I even tried to print at Staples, but it still comes out in either green or regular blue. How to fix this discrepancy? Shouldn't you be able to print the image exactly as it is shown in GIMP or is there an issue involving JPEG files?
View 3 Replies View RelatedIn previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
I'm trying to print a landscape image but the image is reduced when printed. I open a new A4 sized template and make my image but when it comes time to print the image is smaller on the page than A4. Is there an easy solution to this? I have messed around with orientation both in GIMP and my printer settings, I have used the printers' "fit to page" setting and tried everything I can think of.
View 4 Replies View RelatedI am trying to screen print an image of a woolly mammoth and it is difficult to render it properly for use with screens(one color)
View 1 Replies View Related"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
I'm having a very frustrating glitch when working with *.idw drawings. Whenever I create a new sheet in the drawing, the boarder on several of the other sheets resizes, and which sheets resize as well as the size they change to seems completely random.
For example, I have an 8-sheet drawing. If I go to the last sheet, which is B-sized, and then RMB->New Sheet in the browser, Inventor creates the new sheet just fine. As I go back up and look at all my sheets, the boarder for sheets 1, 2 and 8 (B-size sheets) has been changed to C-sized. Sheet 3, an A-size, has its boarder as a C-size as well. Sheets 4-5 (C-sized) and 6-7 (B-sized) are just fine. I deleted the new sheet, went to sheet 5 instead, and then created the new sheet. This caused different sheets to change to different random boarder sizes.
So I couldn't think of a better place to put this. I have something that I'm thinking of having professionally printed. What are the steps I should take to make sure I produce a high quality image? File format, Dpi and so forth. Make a list of steps to creating a high quality image file that will look good printed from a print shop.
View 5 Replies View Relatedhow can I resize the font on my organizer. The print is tiny
View 1 Replies View RelatedI am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies View RelatedI have completed a project and I need to verify that, based on what I implemented, image should be resized but quality of image (both JPEG and GIF) should not be reduced.
My question is it possible to verify the result using photoshop or some other tools? How?
My college said it is hard to check if an image looks different because of image resizing or because of quality loss or because of both. He said I have to create some log files to trace the result. It is a little too much work for me.
When I choose Print in Paint.NET I am offered several layout options, including a 9 picture 'wallet' and 35 picture 'contact sheet'.
I want to use one of these to view several pictures together rather than wasting paper and ink, but I can't find out where to select the multiple pictures.
