Is it possible to resize a 10x8 image (with people filling the 10" width) into a 8x8 image without squashing people?
Or if not resizing, is there a technique that people use to fill out the height part to make it square?
I seem to be having a very tough time dramatically resizing an image but keeping its quality.
I want to go from a 160X158 image to 32X32, how i can do this while retaining quality.
How can I resize a image and layer once I have created the image? When I print the image, it always come out the same size .
View 1 Replies View RelatedIs there a way to just splice my image up into 16 512x512 squares? like a tile set (which by the way I'm sure my math is screwed up on that so how many squares I need to cut out a 2048x2048 image for 4 on top and 4 on the sides that'd be great. I suck at math)
I tried copping and stuff but I can't seem to use the tools right. I wrote a lengthy detailed version of this but figured it was too much to read so I am editing/cutting all the details out
Also the resize part. nevermind I got it figured, I just had to resize the image and the canvas follows suit. I didn't know that, thought I had to resize canvas first then image like in photoshop.
When Rotating or Resizing an image I have recently run into an issue. This is new behavior so I think I either have something set incorrectly, or it came in with a recent re-install.
When Rotating or Resizing, and setting Clipping to Adjust, it always Crops the image.
In other words: If I were to attempt to stretch an image bigger than 1000x1000 to say 1500x1500 it appears to do all the correct calculations, and does stretch the image, but anything outside the original 1000x1000 disappears.
Likewise if I were to attempt to rotate an image that were say, 1000x1500, 90°, I would end up with a rotated image 1000x1000 in size, and transparent/background for the balance of the original 1000x1500 sized image.
I've tried uninstalling/reinstalling (it remembered all my settings, so I don't know how much good this might have done), setting the Clipping option to Clip, then Crop and back to Adjust again (also with no result).
I've been trying to resize an image and tried Gimp 2's interpolation method but nothing happened. I increased the size to 150% with 153 pixels (I think). Did I do something wrong or is Gimp just not good for interpolation?
View 3 Replies View RelatedI am trying to resize an A4 immage so that it will print on 4 A4 sheets, making it an A3. I have tried but I did'nt manage to do it, it resized it back to A4.
View 1 Replies View RelatedI've recently started trying to learn how to use GIMP through making signatures, and for the past 2 weeks or so, it has been going fine.
Today, when attempting to resize the large image down to signature size, even though the preview shows a good quality render, after it scales the image loses all quality. Whats more, thinking it might just be a poor image, I tried to resize previously succesful images and got the same bad result.
Here are some screenshots showing pre / post scale [URL]...
Preview there is fine, and shows a good quality render (exactly what I'm looking for)
[URL]...
This is the result
I understand that the aspect box is unticked, but even with that selected the image became distorted
I have also tried cubic / Sinc, both resulting in blurry picture.
The most frustrating thing is that the preview shows that the picture can be made that small and retain it's quality, and up until now this has not been an issue.
I can't find a way to resize (make smaller) a clip that I have copied and pasted from another image. Here's a screenshot:
[URL].......
How to make the cat smaller?
I'm very new to this photo editing. Never used photo shop. Only slightly understand what a layer is and don't really know how they work.
Basically I want to take one image of a person looking at a computer screen and then on the computer screen I want to paste another image so it looks as though they're looking at the image.I have both images but how to cut, copy, paste and resize so that the image fits the screen.
When I went to make my business cards, I had the settings at 2in x 3.5in 300dpi in GIMP.
When I go to print them as business cards using GimpLabels, you can only see the very top portion of my image. After switching the ruler settings to pxl (in the corner) I noticed my image is actually 2500 pixels by 3500 pixels. Obviously a business card is not that big. So... Is there anyway to easily scale this to the correct size?
I actually have about 10 different versions of this card I have to print.... So it would really suck if I'd have to go in an manually scale every one of them. It would be nice if GimpLabels would scale it itself you know?
I am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies View RelatedI have completed a project and I need to verify that, based on what I implemented, image should be resized but quality of image (both JPEG and GIF) should not be reduced.
My question is it possible to verify the result using photoshop or some other tools? How?
My college said it is hard to check if an image looks different because of image resizing or because of quality loss or because of both. He said I have to create some log files to trace the result. It is a little too much work for me.
I was wondering if there is a possible way to take a small image and make it larger and clear.
View 9 Replies View RelatedI'm just now getting into using illustrator (currently on trial for illustrator cc) and I've taken a couple of my illustrations and attempted to use the image trace. The only way I can seem to get the image trace to actually produce an accurate trace is if I use a very large file size. So I take my scanned image (600 dpi 2000x 1891) and load it into illustrator, and here's where the problem comes in. Illustrator will not show my entire image on the screen. I zoom out as far as I can go and it's still cutting off the bottom and top of the image. When I try to scale the image it won't let me scale it down to even 90%.
So my question, is there anyway I can load my full size image into illustrator, image trace it, and then scale it down so I can see the whole image on my screen? It's very hard to paint and work around the image when it's getting cut off.
The first picture is what the whole picture looks like, but it's such a small file size it's blurry and won't image trace correctly.
The 2nd image is what happens when I load my full image size in, I'm scrolled as high as the page will go and the top is still cut off.
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies View RelatedI am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies View RelatedI have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies View RelatedThe problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?
View 1 Replies View RelatedI'm trying to write a script to batch process a number of files. I want the script to open file a*.png, convert black color to alpha and paste image b*.png on top of a*.png (both are the same size). The script converts black to alpha, but it doesn't paste image.
(define (batch-alpha-paste pattern pattern2);get the file lists (let* ((filelist (cadr (file-glob pattern 1)))(filelist2 (cadr (file-glob pattern2 1)))) (while (not (null? filelist))(let* ((file-name (car filelist))(filename2 (car filelist2)) (image2 (car (gimp-file-load RUN-NONINTERACTIVE filename2 filename2))) (draw2 (car (gimp-image-get-active-layer image 2)))(image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))(drawable (car (gimp-image-get-active-layer image)))) ; convert black to alpha(plug-in-colortoalpha RUN-NONINTERACTIVE image drawable '(0 0 0))
[code]....
I call the script from shell:gimp -i -b '(batch-alpha-paste "aa*.png" "bb*.png")' -b '(gimp-quit 0)'
how to copy image 2 into image ?
i was wondering if it would be possible to get a plugin or maybe there's a way to do this that would 'blend' the border of one image that you paste on top of another, larger image. so that the borders wont contrast - like a black dot on a white page.
if that description doesn't make sense, imagine using such a tool on a a black dot on a white page. it would make the outer part of the circle transition from black, to dark grey, to a lighter grey, and then to white...
When you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
View 2 Replies View Relatedi am trying to use it to design button badges on my new laptop. I have photoshop on my old laptop and have lots of psd files that I have been trying to use with GIMP.
I am finding that GIMP is shrinking my images when I import them to different images and when I come to print them on A4 they are smaller than they should be, and so useless to me in making my badges...
Printing the original image from GIMP gives me it in it's intended size though. How can I stop this from happening?
It happend when I import into an A4 - as I need to fit approximately 40 badge images per sheet.
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies View Relatedso I mess up on an image and I have to undo more than once... this has happened to me on MULTIPLE occasions!!! the undo feature won't undo as far as I need to!!! Gimp takes it upon itself to use a later action as the base image forcing to to throw the whole image away and start over because I CANNOT go back any more because it says 'base image' when I have done other things prior to the so called base image in the undo history!!!
what is causing gimp to do this???
I want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
I have signed up for Adobe CC and now have Photoshop CS 6 for the Mac installed and running.When I come to use the image resize feature, I am still getting the same box as I had in CS5 instead of the new much improved feature.
View 1 Replies View Related