GIMP :: Base Image Forcing To Throw The Whole Image Away
Sep 2, 2012
so I mess up on an image and I have to undo more than once... this has happened to me on MULTIPLE occasions!!! the undo feature won't undo as far as I need to!!! Gimp takes it upon itself to use a later action as the base image forcing to to throw the whole image away and start over because I CANNOT go back any more because it says 'base image' when I have done other things prior to the so called base image in the undo history!!!
what is causing gimp to do this???
View 1 Replies
ADVERTISEMENT
Mar 27, 2012
I've been experimenting with large font sizes on a base image of 2000x3000 pixels. I've been using a basic white type face on a dark gray background and adjusting the lightness and contrast of the white color to different levels. Also, I created the type as as png first and then brought into Gimp. When the image is at full size, the type looks fine, but when I shrink the image down, say a quarter of the size, the edges of the fonts get very jagged and look like they're breaking up.
View 2 Replies
View Related
Aug 18, 2011
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies
View Related
Jul 25, 2012
I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies
View Related
Apr 4, 2012
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
View 2 Replies
View Related
Jul 19, 2013
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
View 5 Replies
View Related
Nov 25, 2013
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
View 6 Replies
View Related
Dec 2, 2012
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies
View Related
Nov 27, 2013
The problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?
View 1 Replies
View Related
Mar 18, 2011
I'm trying to write a script to batch process a number of files. I want the script to open file a*.png, convert black color to alpha and paste image b*.png on top of a*.png (both are the same size). The script converts black to alpha, but it doesn't paste image.
(define (batch-alpha-paste pattern pattern2);get the file lists (let* ((filelist (cadr (file-glob pattern 1)))(filelist2 (cadr (file-glob pattern2 1)))) (while (not (null? filelist))(let* ((file-name (car filelist))(filename2 (car filelist2)) (image2 (car (gimp-file-load RUN-NONINTERACTIVE filename2 filename2))) (draw2 (car (gimp-image-get-active-layer image 2)))(image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))(drawable (car (gimp-image-get-active-layer image)))) ; convert black to alpha(plug-in-colortoalpha RUN-NONINTERACTIVE image drawable '(0 0 0))
[code]....
I call the script from shell:gimp -i -b '(batch-alpha-paste "aa*.png" "bb*.png")' -b '(gimp-quit 0)'
how to copy image 2 into image ?
View 1 Replies
View Related
Jun 22, 2013
i was wondering if it would be possible to get a plugin or maybe there's a way to do this that would 'blend' the border of one image that you paste on top of another, larger image. so that the borders wont contrast - like a black dot on a white page.
if that description doesn't make sense, imagine using such a tool on a a black dot on a white page. it would make the outer part of the circle transition from black, to dark grey, to a lighter grey, and then to white...
View 2 Replies
View Related
Mar 12, 2012
When you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
View 2 Replies
View Related
May 30, 2011
i am trying to use it to design button badges on my new laptop. I have photoshop on my old laptop and have lots of psd files that I have been trying to use with GIMP.
I am finding that GIMP is shrinking my images when I import them to different images and when I come to print them on A4 they are smaller than they should be, and so useless to me in making my badges...
Printing the original image from GIMP gives me it in it's intended size though. How can I stop this from happening?
It happend when I import into an A4 - as I need to fit approximately 40 badge images per sheet.
View 4 Replies
View Related
May 10, 2011
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies
View Related
Jul 5, 2012
I want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
View 4 Replies
View Related
Jan 5, 2014
Is it possible to resize a 10x8 image (with people filling the 10" width) into a 8x8 image without squashing people?
Or if not resizing, is there a technique that people use to fill out the height part to make it square?
View 2 Replies
View Related
Jul 16, 2012
resizing a bigger image to a 5x7 image in gimp? I need the image to be 5x7 but the paper size will be a 8.5x11. How would I resize this image so that I can print it out on a 8.5x11 piece of paper?
View 3 Replies
View Related
Jun 6, 2011
In short, I have two images open in Gimp. I need to add one the images to the alpha channel of the other image. How do I go about doing this? I was able to add an alpha channel but beyond that I am lost.
This bit will only make sense to 3D modelers. I have 3D model that I'm importing into a the Unity 3D game engine. One of the material shaders makes use of specularity maps. Normally the specularity map would reside in the alpha channel of the RGBA diffuse image, but due to file sizes, all these are released as separate jpegs. The idea is to make some parts of the 3D model more glossy as far as I know. The only way to do this is to add this specular image to the alpha channel of the diffuse image, and then the game engine can work its magic, making the skin look realistic.
View 1 Replies
View Related
Dec 5, 2013
i don't know if you can understand my question, i've attached a picture for a better explanation.
View 3 Replies
View Related
Jun 2, 2011
I'm trying to take an image and overlay it onto another image, which I can do just fine. The problem I am running into is that the image exceeds the borders and becomes nothing more than a dotted shape losing all its color. What I want to know is how do you expand the border so that the image once again becomes visible?
View 1 Replies
View Related
Jul 30, 2012
I am trying to add an image next to an image. I did a search and found one post that said to increase the canvas side so that it is large enough to fit both images. I did that. After I paste the second image in to the canvas area, it appears over the first picture. When I use the move tool, it appears to move the second picture behind the new, larger canvas.
View 4 Replies
View Related
Mar 19, 2004
I'm capturing television frames using a TV capture card, but the resulting images do not have the correct brightness/contrast and color values.
Instead of manually altering every image using trial and error, I'd like to take a "correct" source frame that I know is correctly balanced (such as a test pattern), and use it to correct my other captured images.
I've tried saving the source frame's levels and curves and then loading them into the captured frames, but this doesn't produce quite the effect I'm looking for.
View 3 Replies
View Related
Apr 5, 2012
I want to select a specific color from within the image, and change all similar colors within that image to a different color. In other words, after using the Color Picker Tool to select a color from the image, I want to take the selected color (and everything in the image that is equal to or similar in color), and change them all to a different color.
I tried using the Path's Tool to create an outline in the image, and changing colors that way, but it changes all the other colors in the selection I don't want to change. I just want to change all colors in the image/selection that are equal to or similar to the selected color. How do I do this?
View 10 Replies
View Related
Sep 23, 2013
I just started to use Gimp a few days ago. I am trying to duplicate an image side by side, then rotate the one image....just for learning purposes. However the new box (that should have my duplicate image) Is just a blank outline of the rectangle box. I watched a video over and over trying to get this, and I just do not see any steps I am missing, yet on the video it turns out perfect. I am normally pretty good with computers, but evidently not with Gimp.
Here is the Path:
file> open>select and open photo>rectangle tool>outline photo>copy>paste>open new layer>select new pasted layer.
Instead of the photo duplicating itself I get a "blank outlined box".
View 3 Replies
View Related
Jun 1, 2012
I am trying to put an image on top of another image without making it obvious that I did so. I need some way to blur/integrate the images so they look like one cohesive picture.
I've attached the images. The white part of the "cove face" needs to go onto the same spot spot of the other image with the dimensions. However, it needs to appear as if the white part belonged on the image with the dimensions.
View 3 Replies
View Related
Aug 13, 2013
I am making a AGS PNG character. I want to open the character image and add a separate mask image over the eyes of the character. I was unable to get the png mask onto the other character png.
It is a photo and not a drawn image. I can't just draw the mask on. By mask I mean an actual mask and not a mask in Gimp.
View 2 Replies
View Related
Dec 11, 2007
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies
View Related
Dec 5, 2011
I had this leader sub in my 2010 . now I am getting error in 2012 right on Myleader.EvaluateLeader.
View 6 Replies
View Related
Dec 16, 2013
When defining new LISP function with .NET, I think it's necessary to first check for the argument validity (number and type) and I am convinced the evaluation must stop in case of invalid inputs (as the built-in LISP function work).
For this, I use some classes which inherit from System.Exception:
using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.Runtime;namespace LispFunctionSample{ /// <summary> /// Base exception type for LISP exceptions. /// </summary> class LispException : System.Exception { /// <summary> /// Creates a new instance of LispException. /// </summary> /// <param name="msg">The message to be displayed when LispException is thrown.
[Code] ........
These exceptions may be thrown from the LispFunction code, catched to display a message and re-raised to stop the LISP evaluation.
Example:
[LispFunction("acos")] public double Acos(ResultBuffer resbuf) { try { if (resbuf == null) throw new TooFewArgsException(); TypedValue[] args = resbuf.AsArray(); if (args.Length > 1) throw new TooManyArgsException(); int code = args[0].TypeCode; if (code != (int)LispDataType.Int16 &&
[Code] ........
This works quite fine except the message in the command line is followed by an eInvalidAdsName stack trace and, in the Visual LISP console, the message is: "; error: ADS request error".
So, is there a way to avoid the eInvalidAdsName stack trace in the command line and have the thrown exception message in the Visual LISP console so that it mimics closer the built-in functions?
View 9 Replies
View Related
Jan 12, 2011
When I call the BlockReference's GeometricExtents, it throw a eInvalidExtents exception. After some check, I found when the drawing have some fonts that not exist in my computer the exception occur or it works find.
View 1 Replies
View Related
Apr 6, 2011
Is it possible to add a base depth to the transition lane assembly? I need to do volumes for my road, (pavement, base) but there is a section with a transition (which only has one depth), so that section is off.
View 5 Replies
View Related
