I am trying to add an image next to an image. I did a search and found one post that said to increase the canvas side so that it is large enough to fit both images. I did that. After I paste the second image in to the canvas area, it appears over the first picture. When I use the move tool, it appears to move the second picture behind the new, larger canvas.
View 4 RepliesI have an image created and saved to an xcf file. The image is a text logo. Each layer is a different text word. How can bring in an image to place next to my yext? Can I open a new layer and import(or copy/paste) an image into that layer?
View 1 Replies View Relatedhow to place an gif between two layers (or add text, brushes, images over it) without screwing up the animation. I've experimented with it, and the results tends to be that one of the layers (pictures) go missing in the animation or the animation just does not animate.
View 3 Replies View RelatedTo add image to a background am using the brush tool to clean the image to expose some part of the background . for this to work, i must use the scale too on my image first then i an start applyin the brush tool to clean the image to expose the background.if i dont use the scale tool.. the brush tool will the image white intead of exposing the background. pls i want to know, it there any other way i can achieve apart from using the scale tool?
View 5 Replies View RelatedI know how to create text with a background picture inside the text. I want to put this text onto another image. So the text with the background inside the letters, will be superimposed on new image.
View 3 Replies View RelatedI've got an image I'm trying to make my wallpaper thats a 1024 x 768 image. My screen resolution is 1680 x 1050 so if I use the image and use the "fill" option to have the image fit my background perfectly it won't fit and some stuff gets cut off. I have to use the "fill" option instead" of "fit" which gives it borders kind of like of how I want because I'm rotating wallpapers and this is the only one that doesn't work under "fill"
What I want to do is just import my image into gimp and then add some paint on the right and left outside the image to make it wider so it would fit as my background without some stuff getting cut out.
Is there a way to import an image into gimp and then add some paint outside the image and then save the new image with the paint outside the original image onto my hard drive?
I would like to add Greek characters to an image, to describe some properties of a circle, arcs, angles, etc.
Is this possible with GIMP? If so, how?
I am trying to make a montage/collage for my sister's birthday and have the background image and the other images all sorted.
What I would like to do now is add text saying 'Happy Birthday' into the main image, so that it looks as though it is part of the background.
I'd like it to sink into the background or be embossed and take on the colors of said background too, if possible.
How do I get this effect?
[URL]
I'm building a site with WordPress and installed a plugin that will create a slider of images on the front page. For each image, there is specific text that goes with the image (just a simple quote). If it's possible to use Gimp to add text to the side of an image and not actually on the image?
Here's a link to the front page of the site that I'm attempting to add the text to. Currently, the photos are there and you will see the blank space next to the images. This blank space is where I would like to add the text. I've contacted the creator of the plugin and there is no way of doing this from within the plugin, itself.
[URL]......
How can i get such effects like in the attached image;
- first of all; the image has no background - the grapes are shown on a plain white background.Note; there is another nice little thing that we have to mention; the image of the grapes are somewhat with a kind of a overdose of light - i think that this is a nice effect - perhaps added with gimp!? The grapes look very interesting.
- the next effect that i like is the adding of the circles that are seen in the image. How did they add those pastel colored circles.
see this image here
[URL]......
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies View RelatedI am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies View RelatedI have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies View RelatedThe problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?
View 1 Replies View RelatedI'm trying to write a script to batch process a number of files. I want the script to open file a*.png, convert black color to alpha and paste image b*.png on top of a*.png (both are the same size). The script converts black to alpha, but it doesn't paste image.
(define (batch-alpha-paste pattern pattern2);get the file lists (let* ((filelist (cadr (file-glob pattern 1)))(filelist2 (cadr (file-glob pattern2 1)))) (while (not (null? filelist))(let* ((file-name (car filelist))(filename2 (car filelist2)) (image2 (car (gimp-file-load RUN-NONINTERACTIVE filename2 filename2))) (draw2 (car (gimp-image-get-active-layer image 2)))(image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))(drawable (car (gimp-image-get-active-layer image)))) ; convert black to alpha(plug-in-colortoalpha RUN-NONINTERACTIVE image drawable '(0 0 0))
[code]....
I call the script from shell:gimp -i -b '(batch-alpha-paste "aa*.png" "bb*.png")' -b '(gimp-quit 0)'
how to copy image 2 into image ?
i was wondering if it would be possible to get a plugin or maybe there's a way to do this that would 'blend' the border of one image that you paste on top of another, larger image. so that the borders wont contrast - like a black dot on a white page.
if that description doesn't make sense, imagine using such a tool on a a black dot on a white page. it would make the outer part of the circle transition from black, to dark grey, to a lighter grey, and then to white...
When you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
View 2 Replies View Relatedi am trying to use it to design button badges on my new laptop. I have photoshop on my old laptop and have lots of psd files that I have been trying to use with GIMP.
I am finding that GIMP is shrinking my images when I import them to different images and when I come to print them on A4 they are smaller than they should be, and so useless to me in making my badges...
Printing the original image from GIMP gives me it in it's intended size though. How can I stop this from happening?
It happend when I import into an A4 - as I need to fit approximately 40 badge images per sheet.
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies View Relatedso I mess up on an image and I have to undo more than once... this has happened to me on MULTIPLE occasions!!! the undo feature won't undo as far as I need to!!! Gimp takes it upon itself to use a later action as the base image forcing to to throw the whole image away and start over because I CANNOT go back any more because it says 'base image' when I have done other things prior to the so called base image in the undo history!!!
what is causing gimp to do this???
I want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
Is it possible to resize a 10x8 image (with people filling the 10" width) into a 8x8 image without squashing people?
Or if not resizing, is there a technique that people use to fill out the height part to make it square?
resizing a bigger image to a 5x7 image in gimp? I need the image to be 5x7 but the paper size will be a 8.5x11. How would I resize this image so that I can print it out on a 8.5x11 piece of paper?
View 3 Replies View RelatedIn short, I have two images open in Gimp. I need to add one the images to the alpha channel of the other image. How do I go about doing this? I was able to add an alpha channel but beyond that I am lost.
This bit will only make sense to 3D modelers. I have 3D model that I'm importing into a the Unity 3D game engine. One of the material shaders makes use of specularity maps. Normally the specularity map would reside in the alpha channel of the RGBA diffuse image, but due to file sizes, all these are released as separate jpegs. The idea is to make some parts of the 3D model more glossy as far as I know. The only way to do this is to add this specular image to the alpha channel of the diffuse image, and then the game engine can work its magic, making the skin look realistic.
i don't know if you can understand my question, i've attached a picture for a better explanation.
View 3 Replies View RelatedI'm trying to take an image and overlay it onto another image, which I can do just fine. The problem I am running into is that the image exceeds the borders and becomes nothing more than a dotted shape losing all its color. What I want to know is how do you expand the border so that the image once again becomes visible?
View 1 Replies View RelatedI want to select a specific color from within the image, and change all similar colors within that image to a different color. In other words, after using the Color Picker Tool to select a color from the image, I want to take the selected color (and everything in the image that is equal to or similar in color), and change them all to a different color.
I tried using the Path's Tool to create an outline in the image, and changing colors that way, but it changes all the other colors in the selection I don't want to change. I just want to change all colors in the image/selection that are equal to or similar to the selected color. How do I do this?