GIMP :: Make A Ruler To Print Out
Apr 2, 2013
What I want to do is make a Ruler. In particular a Ruler that goes up to 360. This is going to be a Liner Setting Circle that I am going to use to wrap a Dobsonian Base with. So these are going to be in Degrees.
My plan was to try and break up each degree in to 20 increments. I was hoping to used the (Filter>Render>Pattern>Grid) feature to do this in layers. To have 3 Layers overlapping. One are 360 for the main degree marks. One at 3600 for the increments of 2 between each degree. One 7200 for the increments of 1 between each degree.
View 5 Replies
ADVERTISEMENT
Jul 27, 2004
I need to make a ruler in 1/32nd increments 4 inches high and 1/2 inch wide, I've tried going for help in other places but I'm such a newb to PS that I can't get it to come out right.....
View 6 Replies
View Related
May 3, 2012
If i open a new .psd file of any size and i have guide lock on, I get lock lines as i move and object twards the center of the canvas.
So how do you get ps to place guides (H&W) at the center of any doc.
The guides do not lock to a center when i pull them from the ruler. I can not figure out a way to make the ruler show zero at a center point and go =/- out from a zero center point like a number line either.
So, How do i find the center of a doc?
View 17 Replies
View Related
Feb 5, 2011
I'm a new user of GIMP 2.6.11 for OSX, and I can't figure out how to make photo colors print correctly. My printer is an Epson 2200, driver version 8.37. When I print one of my old photos from Mac Preview, colors come out the same as they did when I used this printer from Photoshop 6 on my old Windows PC. When I print the same image from GIMP on the Mac (using the Print command, not Gutenprint, and selecting photo quality and specifying the right paper, etc), the colors are too far off for a simple CY, MAG, Y level adjustment to get back to what I expect. Under image properties GIMP says the color profile of the image is sRGB IEC61966-2.1, and the image appears the same on my monitor in GIMP as it does in Preview. But it appears GIMP may be using a different color profile for printing than for display. is that possible, and if so, how can I change it?
View 3 Replies
View Related
May 3, 2012
I was wondering if it was possible to change the origin of the ruler?
I have a template page I'm trying to set up where I have guides placed roughly an inch into the paper. What I want to do is change the ruler so that the origin, that is point 0,0 , is at the cross hairs where the vertical and horizontal guides meet.
View 2 Replies
View Related
Jan 8, 2013
When I set the ruler to inches, I get divisions that divide by 10 such as 1.1, 1.2 etc inches.
Is there a way to set it so the divisions are set to 8, so each division between the inches are based on 1/8th of an inch?
View 6 Replies
View Related
Nov 30, 2012
Being a 3D modeler, I want to texture my safe in GIMP. However, I have no idea how to go about texturing that dial like bit where you turn the handle, complete with numbers.
I want a lines going out from the center, lots of lines, and some numbers along a circular path.
View 2 Replies
View Related
Jan 16, 2012
I'm a first time GIMP user. I'm a long-time Adobe PhotoShop user.What is the default ruler units. How can I change the ruler units and divisions to whatever I want?
View 3 Replies
View Related
May 18, 2013
Currently when I create a new layer within an image, and set the horizontal and vertical size using “inches” instead of “pixels,” and display the image at 100%, it shows 10 tick marks in the ruler to equal 1 inch.
I want rulers in my image to be scaled at 1/8”. Therefore, it should show 8 tick marks in the ruler with each tick mark (incremental unit) to represent the 1/8” scale. Example: 4 tick marks would equal ½”.
View 1 Replies
View Related
Mar 8, 2011
I have a new machine with windows 7 64 bit and autocad 11. When I choose the 6204 as my plotter I get the following message : "This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the device cannot be found, or the driver has a problem. The None plot device has been substituted." it does not matter if I choose to try and print to the plotter or make a PDF this error comes. up..
View 8 Replies
View Related
Feb 4, 2004
How do you make an Image See Thru?
Meaning making a color image to B&W and
then having the white areas go to none so that
only the black plate is left.
This would be in photoshop 6 or 7
View 1 Replies
View Related
Apr 18, 2013
I have a client who would like to create a banner that is 6x5 feet. She supplied me with a very high quality photo that she'd like printed on the banner. Ideally, it would fill up most of the banner. The file size of the photo is 670 mb. In Photoshop's "Image Size" window, it says that it's 12960 x 8640 pixels, 36 x 24 inches, and 360 ppi.
Is there some way to make this photo display larger, short of taking a new photo with a higher resolution? What happens if I up the resolution in the "Image Size" window?
Also wondering why this file would be 670 mb but only 36x24 inches in size... It doesn't seem to add up to me.
View 6 Replies
View Related
Oct 4, 2007
If I have a set of images I want to make a quick print of on an 8x10 sheet, as thumbnails, is there an easy automated way to do this (short of creating my own action which manually places thumbnails side by side)?
View 2 Replies
View Related
Jul 15, 2008
I need to do a print job for a album(vinyl) cover, I don't have problem with the art work but I'm not too familair with print, I know I have to do CMYK colours, but what is bothering me is what size do I make a vinyl cover in? I can't find measurements online.
View 3 Replies
View Related
Aug 16, 2013
I like to make and print custom cards for family and friends. I use a heavy matte finish paper to print on. But the printing is never as vibrant as my screen image, and this includes photos.
Today I tried this and it worked fine. I converted the image to be printed to a 300dpi bitmap, then using the Photo Tool > Enhance menu, I increased the Saturation to the point where the image looked psychedelic. When I printed on the dull finish card stock, the colors looked just right.
View 3 Replies
View Related
May 11, 2013
Need to make the dwg file into pdf but I also need to set margins (10mm top,right,bottom and 20mm on the left side), tried with some programs but it only gives me the option to set "global" margins and if i use CAD it trims the drawing. I'm working with A4(210,297).
View 1 Replies
View Related
Sep 16, 2012
I know how to create swatches i made some other animal prints (leopard/cheetah). I also made straight line type of pattern swatches.
I don't know how to approach making zebra print swatch, because:
1. the zebra lines are not straight
2. some go all the way through the whole swatch and others stop half way or quarter of the way.
So it is really not like making a cheetah print swatch or a straight line type of pattern swatch.
View 1 Replies
View Related
Nov 9, 2012
How do I make & print CD Lables in Photoshope Elements9?
View 7 Replies
View Related
Apr 24, 2012
I cannot find the time ruler on my screen or where you can add it in. There is simply a slider, with no ruler underneath it. Where can I find this feature?
View 1 Replies
View Related
Mar 23, 2013
Ok gang my daughter as asked me to print of a image of her and her sisters - she's going to redraw over it with thick pencils.
My question is this, how do i or can i make four separate proportional images of the one big one for print of on A4, so it would be four quarters re assembled as the one big original?
View 4 Replies
View Related
Aug 12, 2008
My end result is to make corrections on a digital image and save to print.
Open image from digital camera
Duplicate
Crop, make any corrections
Image Size change to the size I want and resolution to 300
Save and print
View 6 Replies
View Related
Aug 15, 2012
I have found a 3D drawing on the internet. But i want to print it in a realistic view from the top. This is the place where i have found it :
Site
like you see on the site ,an example of the 3d cad drawing
in realistic colors,shadows, ... :
10-22022012-089645L.gif
but when i download the 3d autocad file i open it , and i can only print in this view:
3d cad print.jpg
no realistic view,
now is my question, is it possible to download the drawing from the site ,and print it in a realistic view ?
View 2 Replies
View Related
May 28, 2013
I was given an image of a painting by my boss and told to isolate the figure, then use said figure in a standard step-repeat print.
like that :
. . . .
. . .
. . . .
the image itself is a high resolution because it needs to be, so not surprisingly it keeps making illustrator crash. the print needs to happen, and it needs to become a swatch so I can apply it to tee shirts, hats etc. so far this has been completely impossible.
View 4 Replies
View Related
Sep 15, 2012
Just recently, any prints I try to make on paper larger than 8.5 x 11 is offset, small or both using my epson 3880. Up until about 2 months ago it was fine. Also, the colors appear somewhat muted on the larger prints. Plus, I am still having a problem with prints being too dark but that is minor to the skewed printing. I still have LR 2 & 3 installed and tried using these programs with the same results.
View 1 Replies
View Related
Jul 2, 2011
I can't figure out what to do to see the pixels like in the image below:
[URL]........
View 5 Replies
View Related
Apr 12, 2008
According to Adobe Photoshop CS3 Classroom in a Book, there's a ruler tool hidden behind the Eyedropper tool. All I see are the Eyedropper tool, the Color sampler tool, and the Count tool.
I have Adobe Photoshop CS3 Extended, v10.0.1
How do I get the ruler tool?
View 6 Replies
View Related
Jun 12, 2009
I use the ruler tool a lot and hate the way it keeps reverting to the eye-dropper tool in the toolbar all the time! Is there a way to stop this from happening? If you use the ruler tool, then some other tools all seems okay until you save the image - at that point the ruler is replaced with the default eye-dropper tool. Therefore if you want to use it again you have to select it again which is a pain. Most tools seem to stay as they are when saving except the ruler. This was the same in CS3 by the way. I was hoping this might have been fixed in CS4.I'm using CS4ext in Vista Business.
View 1 Replies
View Related
Jan 6, 2005
how do I find the ruler tool?
But it acts like a pen tool you click one place and then anther and tells you distance in pixels....?
Maybe it was only in CS....
I got 7.0....?
View 1 Replies
View Related
Aug 14, 2006
How could I put a ruler effect around an image?
View 8 Replies
View Related
Apr 25, 2006
when my ruler is set 1:1 that the scale does not give an accurate reading when I place a ruler on screen and measure it. Can this be corrected or am I just being daft.
View 2 Replies
View Related
Jul 24, 2006
I frequently use a flatbed scanner to capture images of them. I normally import the scan into Photoshop and tweak it before saving.
I'd like to also be able to easily put a ruler in the scanned image to show the size of the item scanned. A layer that was transparent except for a ruler that ran along the sides and top of the image would be perfect. Can I create such an image and then paste it on top of each scanned image?
Is there an easier way to do what I want to do? Maybe something already in Photoshop, or some kind of plug-in?
I'm using Photoshop Elements,
View 9 Replies
View Related
