Just recently started getting this hint of green on all white test. I have Gimp 2.7.3 and am using Ubuntu 11.10 64 bit. I just upgraded to 11.10 this problem was also occurring on 11.04.
View 1 RepliesFor some strange reason, there is green in my white letters. I dont know why?
If you see the white letters on the orange button on the attached picture, for some reason there is green in the white?
I'm trying to edit an image to make a white railway carriage green. I've managed to change the existing colours to make it flat, and I worked out how to make highlighting by painting which saved a lot of heartbreak, but now the overlay comes through as a really garish colour or obliterates all detail.
What is the best setting to colour something like this?
I've attached a leaf image. We'd like to "Autumnize" the leaf even more and remove the green from the leaf. I've tried playing with the various options in the Color drop down (Color Balance, Hue Saturation, Colorize, Brightness-Contrast, Threshold, Levels, Curves), but I can't seem to do it.
View 2 Replies View RelatedIs there a way to mix an off-white color to a green color? I'm not referring to adjusting the brightness and adding white, I'm referring to taking a green and adding some other custom off white color?
View 3 Replies View Relatedis there a way to remove or avoid getting purple & green hues in midtones (occasionally in shadows) when making images black and white?
I've been using the channel mixer (most times the red channel) to covert images to black and white and there's noticable purple/green hues.
i'm trying to move the green dummy in the direction of the white arrow I use wire parameter from the Boom Helper, so when i rotate the boom helper i want the weights to move on the local x axes of the dummy but it only moves in the worlds x axes (black arrow)
View 8 Replies View RelatedI have Photoshop Elements 10, and am trying to print a black and white drawing that was scanned, then sent to me via email. When I print out this image, it has an overall green hue and I cant figure out why. I have the black/grayscale box checked in the advanced print settings, but that has still not fixed my problem.
View 1 Replies View RelatedToday I downloaded a trial version of PSE. This means of course that I'm new to the game. I can follow a step-by-step guide though. Here's what I'd like to do: I've taken a dozen photos of an actor with a green screen as a background. Is there a way that I can chroma-key out the green and put in another color, like gray or perhaps a textured off-white?
View 3 Replies View RelatedI am trying to make a break-out view in an idw. I get the message "Hint Ref is NULL" no matter what I try for section depth etc. Also, I noticed that the view I am trying to break-out is not listed in the browser! Also, one of the section views is not listed either. See attached screen shot.
why a view would not show in the browser and what can the error message "Hint Ref is NULL" mean?
I've just started to use GIMP and there's a path filled with green circles associated with my cursor wherever I move or place my cursor. How I can get rid of the path.
View 4 Replies View RelatedI modified the color on a photo and I need to do it again, but I can't figure out what I did the first time. Attached are before and after photos. The before is what I have to work with (a much smaller resolution that what I am really working with, but colors are the same) and the after is the desired result. The leaves with the red arrows pointing to them are much greener in the after than in the before.
View 6 Replies View RelatedGimp 2.6.6 on Ubuntu Linux 8.04.Scanning using VueScan Professional 8.5.20 with an "Epson Perfection 4490 Photo" scanner. Color profile has been built for the scanner using available photo color target from a well-known German source (can't remember name).Almost all my scanning is of postage stamps and related items -- scanning the actual physical objects, not photos of the objects.
Problem:
The stamps are currently scanned on a black background (for lack of other color possibilities; the final goal is on a black background). After scanning, the background is selected and turned to 100% black to have greatest contrast for the object. When a stamp has a postmark that crosses the edge of the stamp paper, the color of the postmark (usually dark or black) is very close to the color of the scanning background and thus when the background is selected, the selection "leaks" and "follows" the postmark onto the stamp. We have to manually exclude those "leaks" from the desired selection area.
Goal:
To be able to select the background (for change to 100% black) without any "leakage" of the selection onto the stamp objects AND without ANY non-black color artifacts remaining after changing the selection to 100% black.
Attempted Solutions:
We have tried scanning on many different non-black background colors and surfaces, but there are always some extreme-edge color artifacts remaining ... leaving a sort of "halo" effect around the stamp object.Some of this could be attributable to the particular model of scanner, though every scanner I have ever owned had a similar problem to a greater or lesser degree. The width of the "halo" usually depends upon which side of the object it is on vs the direction of travel of the scanner device.
In television broadcasting it is extremely common for somebody to stand in front of a "green screen" and for the green to be electronically replaced with some image or video, etc. (For example, the weather person standing in front of a weather map.) It is rare to see a green "halo" if everything has been done correctly and if the person is wearing the correct type of clothing fabric.
Is there some Gimp method or plug-in or other tool that will better handle this type of use?Recently poster Ron Guilmette discussed his use of "Darla-PurpleFringe.scm" plug-in to remove an artifact caused by a digital camera and subsequent processing.
Is there something like that which can be used to remove a color "halo" that results from using a "green screen" approach to scanning? (I would likely have to select different colors of "green screen" so that such colors are not included in the design of the postage stamp.
I have this green-dotted square on my editor. (see attached file) It's not the selection tool and it's not clickable.
Attached File(s) gimp green line.JPG (45.94K)
Number of downloads: 10
I have a series of images that I want to all look as if I'm viewing them through coloured glasses. I have a particular shade of green in mind.. so I have the colour hex code. How do I do it?
View 4 Replies View RelatedI scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
View 3 Replies View RelatedOkay so I'm trying to take the white background off of a picture using the select a color on white, but it takes out a lot or the fur and eyes(it's a picture of a cartoon cat) How can I remove the areas of can from the selection without removing the pieces of cat too.
It's creative commons, so I guess I can post screen shots...
The cat is from [URL]...
A general idea of the selected area
What happens when I take out the selected area
So how can I take the pieces of the cat out of the selected area so when I try to delete the background I don't get an invisible cat?
We are trying to make a little art project with my daughter for her school, so my wife went and took pics of each of the kids in her class making a "heart shape" with their hands. I have the backgrounds that will go behind them all complete, so I just need to extract the hands. Well, I thought I was being smart by purchasing a green piece of fabric to put behind them, but this has almost caused more of a hassle. In the original hand picture, you cannot really see the problem, but after extracting the hands from the original, there is all kinds of green that has bled into the skin color of the kids' arms.
View 6 Replies View RelatedI have this Image: [URL]......
I am trying to keep the same image, but change the green hues to blue hues. I am fairly positive I can recreate the bottom part of the image (the rectangle with rounded edges aka a button), but I don't know how to add the top parts after that. Ideally I would just like to be able to change the greens to blues.
I have this Image:
I am trying to change the green hues to blue hues. I can recreate the rectangle with the rounded corners with a blue gradient, but I don't know how to add the top parts to the image. Ideally I would just like to be able to manipulate the image I have and change the green hues to blue hues.
I created a logo and then opened it as a layer so that I can make a website header image. It is shown here [URL] and as you can see the background is an off-white colour. It is probably unnoticeable to many, but I would prefer to get it right. How can I make the background a pure white so that it blends in with the white of the wordpress theme?
View 3 Replies View RelatedI am deciding to switch over to gimp from pixelmator because of the extra features. However, there is one thing that is making me concerned is some limitations in the filters.
How do I create a checkerboard pattern (using the filter) which has a green color for its primary color and transparency for its secondary color? In pixelmator this is easily done because there are extra color pickers in that filter supports transparency, so no problem. However, this isn't the case in gimp.
I am trying to type white font over a background photograph. It keeps coming up with black text with white outline?
View 1 Replies View Relatedchange the colour of this font from red to white and also explain how you do it because i cant manage it
View 9 Replies View RelatedHow to unite the red and green parts of the leaf into one solid green leaf? See attached “Leaf” file. (How do I attach the AI file?)
I tried the Pathfinder UNITE command and the Live Paint MERGE command.
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI was wondering is their any way to use myriad pro font in the gimp?
View 5 Replies View RelatedI'm looking for a thin font. I'm using Century Gothic for my logo letters, but it looks a little shaky when it's displayed on a web page.
How to import a new font into GIMP?
Today I upgraded from a 2.6 version of Gimp to 2.8.4 in an attempt to solve this rather vexing problem. (Mac OS 10.6.8)
I'm working on a project modifying some existing poster art that already contains a font called Plaza Swash. The originator sent me the font for installation into my (Mac) system, which I did using Font Book. No problem there as Plaza Swash shows up in the list as being perfectly accessible. However, using the text tool in Gimp, this font does not appear in the list. It appears in every other program I have that can access fonts, I just cannot get it to appear in Gimp. I really need to use this font, too. As I said I'm modifying existing work and I need my work to match. This is not the first time I've installed new fonts, it's just the first time I cannot get one to work. It is a true type font and shouldn't present a problem.
I'm using MAC OSX.
I downloaded a font called Palace Script in ttf format. I found my fonts folder in Gimp and copied the font file to the fonts folder.
Then I restarted Gimp.
The font does not show up when I try to select it.
I also tried installing the font using the font manager and it installed, and I can only use it Pages.
so im trying to do text but my font keeps looking all pixelated and shit also not sure if its in the right section
View 1 Replies View Related