I modified the color on a photo and I need to do it again, but I can't figure out what I did the first time. Attached are before and after photos. The before is what I have to work with (a much smaller resolution that what I am really working with, but colors are the same) and the after is the desired result. The leaves with the red arrows pointing to them are much greener in the after than in the before.
View 6 RepliesI have this Image: [URL]......
I am trying to keep the same image, but change the green hues to blue hues. I am fairly positive I can recreate the bottom part of the image (the rectangle with rounded edges aka a button), but I don't know how to add the top parts after that. Ideally I would just like to be able to change the greens to blues.
I have this Image:
I am trying to change the green hues to blue hues. I can recreate the rectangle with the rounded corners with a blue gradient, but I don't know how to add the top parts to the image. Ideally I would just like to be able to manipulate the image I have and change the green hues to blue hues.
I am deciding to switch over to gimp from pixelmator because of the extra features. However, there is one thing that is making me concerned is some limitations in the filters.
How do I create a checkerboard pattern (using the filter) which has a green color for its primary color and transparency for its secondary color? In pixelmator this is easily done because there are extra color pickers in that filter supports transparency, so no problem. However, this isn't the case in gimp.
I draw images by hand and then scan them and digitally color them.
The white of the page is not a solid white, but full of variance.Also, there are many tiny specs of dust and things that show up as grey specs on the image.
Prepping a black-and-white line drawing is easy; I just use color curves to set the mostly-white areas to pure white, doing the same with black, and tweaking the curve how I want to make my black lines sharper or smoother and cutting out those grey specs.
But I've been trying to work out how to add a second level of detail in these drawings. This comes in the form of a light blue. This light blue can be used for so many great things, like points to line up an image that was drawn on multiple sheets or to represent lines that will becomes shadows or highlights that I don't want to show up in the final image.
Previously I had been scanning my pages as greyscale images to completely wipe out extra color variations that I didn't want. If I do that with the blue lines they turn grey and they get eroded when I adjust the color curves. If I scan it as full color I now have subtle color variants that throw things off, and adjusting the color curves still erodes those blue lines even worse.
If I try adjusting the color curves by color channel I turn the whole image to a particular tint.
How can I adjust the colors of an image to turn anything mostly white into white, mostly black into black, and mostly light blue into light blue; and preferably be able to adjust the scale it does this by so that I might prevent dust from becoming black spots and even maintain the greyscale range at the very edges of my lines?
I've attached a leaf image. We'd like to "Autumnize" the leaf even more and remove the green from the leaf. I've tried playing with the various options in the Color drop down (Color Balance, Hue Saturation, Colorize, Brightness-Contrast, Threshold, Levels, Curves), but I can't seem to do it.
View 2 Replies View RelatedWhy when I use green for foreground color and go to Fill and use the option of Foreground color the selection is filled with black? Also why when I open a file with a green square, it also turns to black? And since I am asking questions, how do I get back the ability to get content and search within photoshop, instead of always being directed to Adobe online? I am using CS5.
View 3 Replies View RelatedI've just started to use GIMP and there's a path filled with green circles associated with my cursor wherever I move or place my cursor. How I can get rid of the path.
View 4 Replies View RelatedFor some strange reason, there is green in my white letters. I dont know why?
If you see the white letters on the orange button on the attached picture, for some reason there is green in the white?
Gimp 2.6.6 on Ubuntu Linux 8.04.Scanning using VueScan Professional 8.5.20 with an "Epson Perfection 4490 Photo" scanner. Color profile has been built for the scanner using available photo color target from a well-known German source (can't remember name).Almost all my scanning is of postage stamps and related items -- scanning the actual physical objects, not photos of the objects.
Problem:
The stamps are currently scanned on a black background (for lack of other color possibilities; the final goal is on a black background). After scanning, the background is selected and turned to 100% black to have greatest contrast for the object. When a stamp has a postmark that crosses the edge of the stamp paper, the color of the postmark (usually dark or black) is very close to the color of the scanning background and thus when the background is selected, the selection "leaks" and "follows" the postmark onto the stamp. We have to manually exclude those "leaks" from the desired selection area.
Goal:
To be able to select the background (for change to 100% black) without any "leakage" of the selection onto the stamp objects AND without ANY non-black color artifacts remaining after changing the selection to 100% black.
Attempted Solutions:
We have tried scanning on many different non-black background colors and surfaces, but there are always some extreme-edge color artifacts remaining ... leaving a sort of "halo" effect around the stamp object.Some of this could be attributable to the particular model of scanner, though every scanner I have ever owned had a similar problem to a greater or lesser degree. The width of the "halo" usually depends upon which side of the object it is on vs the direction of travel of the scanner device.
In television broadcasting it is extremely common for somebody to stand in front of a "green screen" and for the green to be electronically replaced with some image or video, etc. (For example, the weather person standing in front of a weather map.) It is rare to see a green "halo" if everything has been done correctly and if the person is wearing the correct type of clothing fabric.
Is there some Gimp method or plug-in or other tool that will better handle this type of use?Recently poster Ron Guilmette discussed his use of "Darla-PurpleFringe.scm" plug-in to remove an artifact caused by a digital camera and subsequent processing.
Is there something like that which can be used to remove a color "halo" that results from using a "green screen" approach to scanning? (I would likely have to select different colors of "green screen" so that such colors are not included in the design of the postage stamp.
I have this green-dotted square on my editor. (see attached file) It's not the selection tool and it's not clickable.
Attached File(s) gimp green line.JPG (45.94K)
Number of downloads: 10
I have a series of images that I want to all look as if I'm viewing them through coloured glasses. I have a particular shade of green in mind.. so I have the colour hex code. How do I do it?
View 4 Replies View RelatedJust recently started getting this hint of green on all white test. I have Gimp 2.7.3 and am using Ubuntu 11.10 64 bit. I just upgraded to 11.10 this problem was also occurring on 11.04.
View 1 Replies View RelatedHow can I change the green color of the background in this image?Also, I would like to soften and spread out the edges a little more of the white light if possible.
View 5 Replies View RelatedHow can I change with photoshop the color of below pencil from dark green to light green similar to the one in same photo? URL....Usually I use Tonality/saturation with good effect but with this special green I don't find a good solution.
View 2 Replies View RelatedI have an app on my iPod called "Photoshop Express", and it has the simple option of 'Tint', which will tint the image the color you want (red, green, etc.). How do you do this on normal, desktop Photoshop?
No fancy "how I like it", I want just the image to be tinted red, or green, or blue, and the image have the color info, meaning if I convert it to Black and White, you could tell a difference in lightness and darkness from the original picture (you can tell it was tinted).
This photo is framed with a glass facade, which reflects exterior light and obscures a portion of the green matting border. I would like to eliminate the reflections and substitute the green color of the matting.
Attached Thumbnails
We are trying to make a little art project with my daughter for her school, so my wife went and took pics of each of the kids in her class making a "heart shape" with their hands. I have the backgrounds that will go behind them all complete, so I just need to extract the hands. Well, I thought I was being smart by purchasing a green piece of fabric to put behind them, but this has almost caused more of a hassle. In the original hand picture, you cannot really see the problem, but after extracting the hands from the original, there is all kinds of green that has bled into the skin color of the kids' arms.
View 6 Replies View RelatedPhotoShop CS5.5: I'm trying to change the color black in a simple, scanned logo to green. I can't get the fill to accept the CMYK formula.
View 1 Replies View RelatedI recently installed Photoshop 7 on my PC and when I open the program the default color settings appear all yellow and green toned and not true RGB. I have tried messing with the settings but I cannot seem to solve the problem. It would be easier if I could show the screen shot of what I am talking about.
I work for a large fortune 500 company and the software is installed through a server which allocates the licenses. I dont know if there may be a bug in the program but maybe that has something to do with it.
I have a damask flourish design in JPEG format. I want to change the entire color of the design from green to pink. How can I do that? I have an older version of Photoshop Elements 6.0 on my Windows XP machine, but can upgrade to 11 on my Macbook Pro.
View 5 Replies View RelatedThe fresh install of LR 5.2 renders all images - RAW and JPG - throughout the program with a very dark, green-yellow colorcast. The only place where images appear normal is in the Import dialog, while the thumbnail mode is active. Apart from that, every program module features this annoying reproduction. Here are some supporting screenshots (red rectangles are from me):
Import screen - thumbnail view - OK:
Import screen - preview - NOT OK:
Library view - NOT OK:
Strangely enough, if I export the picture to JPEG - without any modifications - the image appears normal again:
LR version: 5.2.1, 64b (tried the 32b version too, same error)
OS: Windows 8, 64bit
Camera: Canon 40d, imported images are RAW.
I'm trying to edit an image to make a white railway carriage green. I've managed to change the existing colours to make it flat, and I worked out how to make highlighting by painting which saved a lot of heartbreak, but now the overlay comes through as a really garish colour or obliterates all detail.
What is the best setting to colour something like this?
My epson R1900 printer will not print the color green- all inks are full
View 3 Replies View RelatedI have created a drop shadow on a green background.
Shadow Black value being C - 0 M - 0 Y - 0 K -100.
In the file and the hard print the shadow comes out as a reddish color. How do I get the shadow Black?
I'm looking for a way to copy a text or a simple line, circle... ; after I copied it, the last entity change its color to green.
View 3 Replies View Relatedim trying to make an adjustment to one section of my footage.i followed other instructions elsewhere about making a mask on a solid and then linking the solid to a null object, which has tracking footage (i was thinking i could motion track a mask?)
so i did that, but tracking motion doesnt work, the mask moves everywhere so i went in and moved the mask points at keyframes, which was annoying. but now i can't add adjustments to the solid where the mask is. i turned the solid into an adjustment layer but adding color correction adjustments doesn't work.
i have to use after effects by the way. basically tl:dr i need to color correct one section (or the masked part) of my footage. how can i do that in AE?
also is there an easier way to motion track something that goes completely off screen or out of the comp window? cause its a handheld shot and theres like a pan, and im trying to track the mask but it doesnt really work or stay around the area it needs to.
Suddenly when applying a color balance adjustment layer I'm unable to click on the shadows, midtones, and highlights. They are each grayed out and I'm only given the option to apply the setting overall. I'm thinking I must have made some kind of setting change somewhere for this to happen.
The images are RGB 8bit color mode.
I have a question about color balance. It seems it's the only one that the drag and drop doesn't work. It's my pc , or is the default?
I added 2 screenshots. i added a red arrow to let you see the mouse pointer in the first screenshot i can drag and drop (i'm not talking about the sliders) in the second screenshot , ONLY color balance (and it's very WEIRD ) i can not drag and drop.
I'm under w7 , tested under 64 and 32bit .don't know about mac.
in the tool options ... the brush size slider bar thing...
so ive been doing alot of pixel work... and i HATE how the brush size slider, if i click in the middle of the sizer bar slider thing... its like 500 pixels....
is there a way to adjust the range of this bar? in preferences or something?? i cant find it..
it is SOO annoying and would speed my workflow by like 200%
i want the slider to be like 1px - 50px .... not 1px to 1000px .... its insane... and then when i click up and down arrows it goes by .01
Do you know why the color of color picker changes when using adjustment layers?
View 1 Replies View Related