I have a picture of 200 or so colors. I can create a palette of it by going to indexed mode. No problem there.
My problem is when I load a different image, and if I try to recolor it to this new palette, GIMP is choosing the new colors according to the luminosity values, not what the colors actually look like.
Is there a plug-in or something that makes GIMP choose the closest-looking color?
Using it to design minecraft textures. The textures are quite small, each block being 32x32 pixels and arranged in a 512x512 pixel sheet. Basically, I'm making a lot of small icons. Now, what I want to do is select an area, and change just some colors within it - like changing all greys for green or all reds for blue. I cannot find how to do this, apart from using the Wand to select the parts by themselves and change - it is possible, but veeery time-consuming (due to low resolution, every pixel that goes wrong will be noticed).
View 2 Replies View RelatedI'm trying to create images of pairs of cards from png images of a deck of playing cards, basically I would like to combine two cards into a single image, i.e. have the A clubs with the King clubs for AcKc (attached), I would like to do this for all starting hands if you're familiar with poker (AA,KK..72 etc)
Lastly, I would like to change the color of the diamonds and clubs suits from red to blue and black to green respectively, without affecting the black border.
Attached File(s) king_of_clubs2.png (256.97K)
Number of downloads: 7
I'm a real novice to photoshop and am just trying to do something "very" basic like recolor an image. Can someone give me the steps?
View 4 Replies View RelatedWe've been asked to see if we can recolour the stand mixer in this image from it's silver/grey finish to a glossy black as we haven't got a sample of the product to properly photograph here.
We;'re using Photoshop CS5.5 by the way.
I have an image which I want to display using only a limited set of specific colours which I have defined in a colour palette. I am aware of the colour map plugin, but from what I can gather from the documentation it simply uses each pixels luminosity as an index. I want to to map each pixel to the colour in my palette that most closely represents the original colour. How do I do this?
View 2 Replies View Relatedis there a way to take an image opened in Gimp and display the palette of colors in the image or convert the image itself into a palette of colors that are in the image?
View 3 Replies View RelatedI've only ever used gimp sparingly and for simple stuff. I now need to set the palette of a 8-bit png to a specified palette, but I can't find any in gimp or online about how to load a palette. I need the palette to contain colors that may not be in the image if thats possible as these images are sprites of under 40 colors, but I need a full 256 color palette. Also is there any simple way to convert a string of numbers into a gimp palette? If not Ill probably just look at how they are saved and just write a simple script, but I thought i would ask.
View 5 Replies View RelatedI'm attempting to recolor two shirts in a pic - one is yellow and one is black. I select the yellow shirt, Desaturate, add the new color, then Linear burn, to retain the material creases, and the result is great. However, when I do this with the black shirt, the process doesn't work. Presumably, this is because "black" has no color?
In any event, the color I want to apply comes out too dark and the shirt doesn't look real.
Any plugin or something that gathers all the colors within a given image and allows you to save the pallete in another image...If you seen a sprite sheet thats pretty much what Im asking for.It'd be cool if the colors were sorted by how dark it was and by RGB.
View 2 Replies View RelatedLet's say I have a simple image with some text and a blue background, RGB (32, 45, 213)
I want to recolor the image such that the blue background changes to a green background. I want the green background to be an exact color, RGB (34, 176, 62)
How do I get about doing that?
I'm trying to color in an image, but I want to use a totally 1 bit palette,like this- to get an effect similar to this-
I know the second image actually has shades of gray, but the effect is similar to what I want. Is it possible to do this in gimp?
I am a novice in photoshop and I've been trying to accomplish what seems to be an easy process. I received an illustrator file of a logo that I'm trying to work on...it has several issues that I'm trying to fix...in photoshop how to use illustrator. My major issue is recoloring parts of the image while keeping the edges smooth. It's currently brown and I just need it black. I have tried the following methods:
-Magic wand the brown part and create a new layer via copy
-using brush to simply paint over it
-using paint can to fill the selection - anti aliased, I've changed the tolerance a million times
-Use straight paint brush to trace over it, using a soft edge brush
-my hand isn't steady enough to do it
-Magic wand and create new layer then do and over lay
-Converting it to black and white
-it turns gray
I have 77 png images of a sprite character and would like to recolor them with the least amount of effort.
The procedure I used so far was to recolor one sprite, for example from this to this and then applied the palette of the new image to all the others. However, during that tedious process I lost the offset information of the original images, which was reset to 0, 0.
I have this GIF(attached) that I am trying to change to orange (#FF7200). The only way I can think to do it is to put a layer over the top of it with the color I want and then reduce the optacity - but this never works because it just looks brown or something. Is there a way to remove the green and replace it with Orange using this file?
View 2 Replies View Related Colorizing a photo can be fairly simple using Adjustment layers and Hue/Saturation, what I've never been able to do though, was convert black to white within a photo. The other way around, white to black, is fairly easy to pull with decent and satisfactory results. Black to white on the other hand, seems to give a lot of trouble in maintaining proper and believable luminosity. If I have a black plastic object, for example, that I'm attempting to turn white... through all random experimentation I have done the object either becomes another 'material'... ie. metallic, or the object becomes too washed out (loses detail) to even make the eye believe the change is real and the material is still the original. I do know, though, that people are capable of creating the illusion of all sorts of material and surface through photoshop. So, if someone has an idea on how to 'colorize' and image while maintaining the original and proper reflection of light on the surface of the object,
Attempting to lighten plastic center plate using levels, loses correct material luminosity and becomes metallic
Attempting to lighten plastic center plate, using Lightness/Saturation, loses vast amount of surface detail, becomes 'flat' and washed out
Is there a way to have more than 12 colors contained in my color palette in GIMP?
In the image seen below, I see that it can remember 12 colors in the main palette on the left, but with the color dialog palette on the right, there seems to be no way to add or change colors there, but it has more room than for 12 colors.
Is there a plug-in that allows GIMP to remember more than 12 colors? I did a search in the plug-in registry but I didn't find one.
I've been working on scenery tiles to serve as ground textures for an X-Plane airport. To get seamless transitions between the tiles I work on four tiles at the time and subsequently copy this large image to four smaller ones. Before I started out I ensured that all images were converted to full color (millions of colors) since they came with a limited 256 color palette in the first place. Still, during some copy and paste operations I've got tiles with a drab hue. So, it evidently takes the palette of the image I paste it unto which would make perfect sense if that palette was limited. However, it shouldn't be!
I've got around the problem by pasting problem tiles unto other images or started from scratch with a white canvas. It seems that any existing palette is limited and will skew the hues of a layer being pasted unto it. I work with *.xcf, then *bmp and finally *png in case this makes a difference. So, does a "full color" *.png still have a limited palette? Further, is there a way to ensure that a selection will retain its hues beyond starting out with a global choice of millions of colors?
See Attached photo. I can do the color black on top yellow on the bottom half. what is the best way to do the red line that separates the yellow from the black.
Attached Images
Attached Files
NP-EMD-GP-9_Copy-1.bmp 220.58KB
34 downloads
how to find the color palette for pencil. It's always black.
View 5 Replies View RelatedI'm trying to make a slideshow GIF with about 12 pictures. The problem is that when I convert the image from RGB to indexed, the quality of the pictures are horrible (dithering didn't work). I tried isolating 1 picture from the other 11 layers, and converting it to indexed had great quality.
Correct me if I'm wrong, but I think the problem is that the color palette is too generic, since the palette has to include all colors needed for all 12 pictures
According to wikipedia, the GIF "allows a separate palette of 256 colors for each frame".
Is it possible to create GIFs with separate color palettes for each frame?
I have a great picture of Jet Jaguar. I'm interested in pixel art, so I reduced the colors to an indexed 16 colors.
I want to save the 16 colors in this pic to a palette for later, but how? I've been looking in vain through the menus for a way to save this color map as a palette. Maybe there's a script or plugin somewhere, but it is hard for me to believe there isn't a built-in way to do this.
I love single window mode in the new 2.7 series. I currently have my preferences such that the main tool palette is locked to the upper-left side of the single window.
However, I can't move it. How to replicate this on a new install (since by default the tool palette is on the upper-right and can't be moved).
I'm guessing I missed a setting / preference somewhere. How do I move the main tool palette?
Previously, I had been able to add .aco color palettes to GIMP and use them. But they are suddenly no longer in my palettes menu and I'm getting this error for each one I had added (and used before):
Fatal parse error in palette file 'C:UsersChristina.gimp-2.8palettesTransitional.aco': Missing magic header.
The Palette Editor won't stay on top when GIMP is in Fullscreen mode,yet does when GIMP is not in Fullscreen mode.
View 1 Replies View RelatedHave an open image in gimp 2.8 on suse 12.2, I call the "import palette" function, I set 64 colors, step 32, check the "from all layers" etc etc, and in the preview I see the 64 color palette I'd like. Looks good.
BUT: underneath the preview it says "the selected source contains no colors."And continuing the palette is indeed empty.
-----BEGIN GEEK CODE BLOCK-----Version: 3.12GCS d--(+)@ s-:+ a C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K-w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h>++ r* y?------END GEEK CODE BLOCK------
I know how to use eyedropper to pick up colors and save them into a palette. could I export the colors I picked up (one by one) and save their RGB values into another file directly. Suppose I picked up 10 colors, I want the RGB values of these 10 colors could be retrieved by a single time. Now I have to type these RGB values into another excel sheet one by one.
View 2 Replies View RelatedAs a pixel artist, I could not find the following:
1) I have been searching for a way to edit my color pallette indexes in real time (preferrably through a RGB/HSV slider). Is this currently possible through any means?
2) Is there a way to cause a pixelated effect with the gradient tool (or any tool)? This can be used for quick background effects, speeding up a process for a piece.
3) Turn off the dimming from the navigator window when I zoom in.
4) (See attachment) Adjust the status bar to be more useful than just simple tips. I also don't need a scaling indicator if the navigator window forces me to have one. It would be nice to turn this off for the navigator window as well. Being able to maximize the space for that window would be ideal for more detailed previews.
I already use GIMP for stilled pixel art, and would like to maximize my speed and efficiency doing so.
I am unable to decrease the width of the Palette Editor window. How doI do so?
View 3 Replies View RelatedI am using coreldraw x5 . when i first installed i had an image palette (think that's what it was called) on the page that i could move around and it had everything on it including colors. but now its gone and i cant find how to get it back.
View 1 Replies View Relatedhow to do to get the Animation Palette back but it is not showing up.
View 1 Replies View Related