Is there a feature where I can take several low- light pictures and use GIMP to compute what is noise and what isn't? The concept is pretty straight forward, and I can see it being part of this software.
View 1 RepliesWhat I want to know is if there is a way to make a hotkey or at all save specific options for specific tools. Let's say I'm using the 'Paintbrush, Opacity 70%, Hardness 075, Size 4.00' as my "standard outline tool". Can I some how save that preference (and any other tool such as "Specific Eraser Op. 100%, Hard. 100, Size 10.00) so that I can easily switch between "Ouline Brush" and "Specific Eraser" . Maybe to the 'f-buttons'
I'd like to be able to make maybe 5 specific tools:-Outline Brush
-Small Eraser
-Big Eraser
-Detailed Color brush
-Big Color Brush.
I'm using feature lines created from utilities line work to label utility locations on section views. To avoid selecting each individual section view, I'm using Profile & Section Views, Section views, Project Objects To Multiple Section Views. This works great. Labels are placed on the Sections Views all at once, just requiring a little clean up of label locations. However, there are feature lines for other purposes in the drawing, and these are all labeled at the same time. Any way to select which feature lines will be projected? I've been erasing the extra labels, which is still faster then placing one label at a time per section view.
Win 7 64BIT
C3D 2013
When I Save For Web the color shifts. It becomes more vibrant (which I would prefer...). I have reset the settings for photoshop followed by a uninstall/install of photoshop and am still getting the color shift. I got new monitors somewhat recently but set up the color profile via adobe gamma's thing ( I had to download that seperatly, I couldn't find it in the Control Panel).I don't think it's the color profile of the monitor because everything else seems fine. I have never had to use any of the settings for color management before so I've never opened those (I've hit Ctrl+y on occassion on accidnet..) Here is a jpg of the difference(of course it's been processed 2x..so it's a little bit more vibrant but it's still visible)I included the settings I have in the jpg.
View 5 Replies View RelatedI'm working on a big document (we use cdr for producing brochures). Â I know that when I save it takes around 30s, but as soon as I click the save icon it greys out as if it's saved the document instantaneously (as do the save, save as and save as template menu commands). Â
Unless I wait the 30s or so, when I try to do something the program either doesn't respond or crashes. Â If I wait, it's ok - trouble is I don't know exactly how long to wait as there is no on-screen indication (and the icon is telling me it's all done, which it isn't).
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
There's probably a simple explanation, but if I have a file open for a long time in Photoshop the blacks will start to appear oversaturated/blocked up. If I close and reopen file it looks normal again.
Â
I am using OS X Lion, Photoshop 5, Apple 30" Cinema display. My monitor is calibrated with a i1 Display by X-Rite and resets according to amibent light.
I'm starting to learn a bit about GIMP and in this process I downloaded some brushes.
For the most part I found brushes with file type gbr and gih. These are recognized by GIMP 2.8.10
Some of the brushes come with file type abr and ggr. These are not recognized by GIMP 2.8.10
Is there some way to make abr and ggr file types work under GIMP?
Working with GIMP under Windows 7.
How to change the shape of an image to fit a specific shape.
What I'm trying to do is reshape a geometrically patterned rectangular image so that the printed image fits around a truncated cone. I'm trying to use the image to create a stencil for glazing a straight sided pottery cup. I know the circumference of the rim and the circumference of the base of the truncated cone so I need to wind up with the borders of the image having a convex curve at the top with the arc length equal to the rim's circumference, a concave curve at the bottom with the arc length equal to the circumference of the base, and with the end points of both arcs connected with diagonal lines equal to the length of the sides of the cup. In addition, I'd like to preserve the image in it's entirety, but distort it as necessary to fit the borders without cutting any of it out. (I attached a sketch in case my pattern shape description was confusing).
I'm creating a sprite sheet and I need to move my sprites to a specific location.
For example my sprite is 120x120, so I need to place the 5th animated frame at EXACTLY 120x5=600 pixels from zero or at 600, 0. I can't seem to find a way of doing this in GIMP, it shows me a mouse delta position from where I first clicked?
I have a question with batch crop. I have about 300 images of same dimension and would like crop to specific position in all of them. In photoshop, I would import all the images as a layer and crop a layer, then export the layer as an individual file.
View 1 Replies View RelatedI have a jpeg image of a motorcycle on a pure yellow background. I want to make the yellow transparent. Naturally there are a lot of spaces within the motorcycle image that contain yellow.
I followed instructions I found...
Removing the background of an image
1) add an alpha channel to your layer
2) use colors/color to alpha and use the background color
This results in the checkerboard being applied to the motorcycle, not the yellow background. I assume that's okay.
This makes all the pixels with the background color transparent, and those with a close color partially transparent.
Then:
- select the background with the magic wand,
- grow the selection by a couple of pixels to ensure that the border of the sprite is in the selection (the most important work of color-to-alpha is on the border pixels, so they shouldn't be protected)
This selects only the area outside the bicycle, but I don't mind reselecting smaller areas, if I can.
- grow the selection by a couple of pixels to ensure that the border is in the selection (the most important work of color-to-alpha is on the border pixels, so they shouldn't be protected)
I am trying to use the rectangle tool to select a rather specific area. I am trying to make a 50x50 square in the bottom left corner, but I don't know how I would accomplish this.
View 1 Replies View RelatedHow do you draw parallel lines with a specific distance between them? I was gonna use this function for futuristic artwork. Do you have to use the grid for this or is there another way?
PS. is there a plugin maybe?
I have an image that is 5363x3575 and I need to resize it to 960x381.
Is there any way that I can resizing without croping or distorting it?
I want to crop an image - it says a dialog box will pop up after I select mycropped area, but no dialog box pops up.
I can't see how to finish the crop and save it.
I have been using Gimp for a while now. I just recently switched from PC to MAC and installed Gimp on my new MacBook (OS X, Snow Loeopard). I was editing some photos and want to use the clone feature to remove some birds from the sky and for some reason it will not allow me to use clone.
View 2 Replies View RelatedHow can I find all pixels in an image with an exact, specific color? So far, I've only managed to find the pixels matching a pixel I click on; but I wish to find pixels matching a specific color value!
View 1 Replies View RelatedI'm currently trying to use the text tool so I can color a line of text in two differing colors. However when I highlight the characters I want to change the whole line changes.
How do I change the color of specific characters in a line of text?
For example, if I save a gif, and I set the frame delay to 33ms each (about 30fps), then load that gif into Gimp, it says the layers are set to 30ms each.
Is this a quirk with Gimp or a limitation of the gif format itself?
Does gimp have a feature similar to levels and curves in photoshop? In photoshop, a new layer for levels and curves is created?
Is there a particular part of the forum where similarities / dissimilarities with photoshop are discussed?
I recently found GIMP and think it is amazing. I've been a PhotoShop user for years, and actually prefer GIMP. The one thing I can't seem to figure out is holding me back from using GIMP exclusively, and that is the Record Action feature. I have to manipulate about 100 pictures per day - simply resize a picture to 6x4" @ 300 dpi, save it, resize again at 100 dpi, put a 10 pixel; black border around it and save it to another directory. I can do this to a hundered picitures in about a minute with PhotoShop, but it takes quite a while with GIMP.
View 2 Replies View RelatedI'm trying to label parts of an engine photo with the text feature in GIMP. However, after I have typed my text and press enter or escape, it always leaves a yellow and black hyphenated rectangular frame around the text. How do I get rid of this frame so that only the text will be left?
View 4 Replies View RelatedI'm trying to bind the number keys to specific values for opacity/transparency of brushes, so I embarked for the shortcut key editor where I found that the "set transparency" does exactly the same as "completely transparent".
Is there a way to define what value "set transparency" sets it to? what I'm trying to do even possible with GIMP?
Im using Autocad Structural Detailing 2013. Its is possible to make specific command to start at specific layers?
EX: Breakline ,by default start at "LAYER 88".
Polyline ,by default start at "LAYER 150".
I have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
View 4 Replies View RelatedI am running Autodesk Map3D 2012 and I need to label my feature points no matter if they overlap or not.The Map3D documention refers to a check box that will allow what I believe I need- but I cannot find the checkbox in the style editor. Here's a clip from the Autocad documentation:
Â
To allow labels to obscure points on the selected layer..In the Display Manager , select the point layer. Click the Style button.In the Style Editor, click Allow Other Labels To Obscure Feature Symbols On This Layer.
I like to use the sharpen feature and the unsharp mask feature but haven't gotten very good at it. Mostly I'm wondering if there is a way to calibrate the sharpen function so that it doesn't sharpen quite so much each time I click it.
View 2 Replies View Relatedor how to position a picture in a specific location within a background picture.
View 3 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI have a layer that is all white with text and some shapes (with heavy anti-aliasing, so the alpha channel variations of white, too) and I am trying to convert it to a specific other color (just a cream color that I have the HTML code for).
So, when a layer is all one color (not counting variation in alpha values), is there a technique to change that to a specific other color, rather than just toggling the "Color Balance" to get an approximation?