How to select exactly on the edges of the canvas ?
Lets say I create layer 1 , 640 x 480 and fill with white . Now I create a new layer, layer two, and I only want to select the whole top section (ie right from top, so the selection will be 640 wide, and lets say 50 down ? Just not sure how I can select right on the edges (i.e. on the edges of the canvas).
I have a vertical (rectangular) photo that I have pasted into a square canvas. I am looking to expand the photo to the edges of the canvas in a specific way: I want to stretch the edges of the photo (not the whole photo) such that the closer the photo edge is to the edge of the canvas the more stretched it is.
View 1 Replies View RelatedHow can I select a layer by clicking on canvas like I can with Photoshop (Auto select layer enabled).
View 1 Replies View RelatedI remember being able to select anything on the canvas with my Quick Select tool in CS5.5 Photoshop Extended. Recently, making the switch to CC, the Quick Select tool will show my slection as I drag along the canvas, but once I release the mouse, the selection seems to be reduced to the visible pixels. I was intentionally trying to fill the transparent sections with my effects as well.
Mind you, the magic wand will select transparent pixels just fine, but it also adds unintentional sections which is irritating. I should probably also pint out that I already looked into the "lock transparence" option in the layers, but I did not activate anything of the sort.
I often work with very large images (300dpi, with both geographical space and file size very large) since I'm often printing these images for print / direct marketing campaigns or signage. The image I'm working on now, for example, is 255MB / 44" x 42" @ 300 DPI. That's a big picture! So, sometimes I need to work in detail at the edge of a document. That's where the problem comes in:
When I'm zoomed in at say 100%, while working with that 44" by 42" image, obviously I must scroll around to get access to other areas of the image and display them on the screen. However, if I try to use the Hand tool for instance and drag up so I bring the canvas up and expose some part of the gray outside (and thus exposing the edge plus some blank space for me to work on, just like you'd do in Flash or whatever other programs.) When I try to do that with PhotoShop CS2, it will bring the image to the edge of the image's window, but not allow me to drag it even further like you'd be able to do at say a zoom level of 50% or smaller.
Can I enable this feature so I can drag images and move them into the window display but also show some of the exterior of the canvas so that I can work in great zoomed detail but at the leading edge in 100% zoom mode?
How i can select multiple edges and perform some modifications on them like moving one endpoint of them and the multiple edges react like i would do this with one single edge.
View 3 Replies View RelatedI sometimes press random buttons on my keyboard accidentally, so i think this might be a cause of that. I cannot individually select polies or edges (verts work fine) clicking on them does nothing and the only way to select them is box selection.
View 1 Replies View Related how to select items on the canvas, aside for selecting each individual layer on the layers panel. have Mac os X 10.7.4, and I previously had cs5.5 on my laptop.
I was able to use the direct select tool to select mulitple items by either dragging it would select anything in the box or using shift to select multiple items. Do I have to click on every item in the layer panel to select it on the canvas? Is there a option that I have checked when it should be unchecked?
I know about F3 and F4, but usually when i used maya and 3ds max 2014, i could see edges when i select an object....now i cant. When i go into edge mode, i cant even see edges at all unless i blindly select them. This image i show has a box of 2 segments and i selected the middle edges....can only see what i selected in red.
View 2 Replies View RelatedWhat I'd like to know is whether Maya can do accuracy.
For instance: Is it possible for me to select two edges or vertices and type in an exact distance that I would like to have between them.
Very fine accuracy is not required.
i am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
In any given shaded visual style, is there a way to select solids by their edges rather than the face? Ideally I would like to have X-Ray visual style turned on and be able to select objects in the background through objects in the foreground. This used to be possible in AutoCAD 2006, but I can't find any variable in AutoCAD 2011 to achieve this.
View 9 Replies View RelatedI have a PSPIMAGE file with a plenty of images as different layers. I am adjusting the images having one image "size" as reference (make same width and height). But I could select the multiple images just through layers pallete
whether is possible to select multiple pictures (each in different layer) by using the "pick tool" direct in the canvas (or other means)?
How to make the selection using the 'Path Select Tool' to auto fit the image edge to edge. The reason is that I have 9 images that have to be exactly the same size with slightly rounded corners for a website header, one for each country. Is there any way to auto fit?
View 5 Replies View RelatedIn the initial part of the simulation promotional video [URL]....
the internal space of the valve is selected by first selecting faces, then selecting Part Priority and then Isolation, producing the combined total flow volume space. Despite repeating this procedure many times I find I am unable to create and isolate the required volume space. The inner surfaces of the valve are selected but when selecting Part Priority, part of the valve solid part highlights and the selected inner valve surfaces disappear.
I have managed to derived the volume space by subtracting a new derived part, however the example provided in the video suggests the process of defining the air space can be achieved a lot quicker.
For some reason I can't select the "stroke path" option with the pen tool in photoshop to add tapers to my pen tool strokes. I can only get dead lines. why is this not working?
View 4 Replies View RelatedI just installed softimage 2012 on my pc and I've been having several bug problems. I can't select faces on models. Points, edges, etc. are available but not faces. also, when I change to textured view mode, no textures appear, it always shows as shaded mode. finally, xsi always opens with the layout messed up and on robot mode.
I 'm running it on administrator mode on windows 7 x64 also I tried disabling windows desktop styles etc.
I have an NVIDIA GEFORCE 9600 GS video card
8gb ram
700 gb hd
Is there a way to select only visible edges on an Editable Mesh object?
View 2 Replies View RelatedIs it possible to select an area then within that area select by color?
View 1 Replies View RelatedI'm working with GIMP 2.84 for Mac, and my Fuzzy Select Tool is not working. When I choose it and try to select an area, it won't select.
View 3 Replies View RelatedIm trying to get used to using Quick Select and Refine edges to mask out objects in my photos.
It works pretty well but Im still having trouble in some spots getting the edge to be a smooth curve.
How do you get the refine edge function to allow you to modify its edge so you can have a perfectly smooth edge?
Ive tried using the Refine Radius Tool and it just doesnt smooth it out completely.
With all the interface options, I'm having trouble finding one I think was available in previous versions: rotating the canvas.
Is it in the menu somewhere? Is there a shortcut?
I'm already very impressed (and somewhat overwhelmed) by all the features I've seen so far in Gimp.
HAving just installed 2.8 after using 2.6, I find all scanned images and existing jpeg files I created in 2.6 are displayed at ridiculously large dimensions. In 2.6, all scanned images were loaded on screen at their actual A4 size, regardless of scan resolution. In 2.8 they are loading up on screen at around 5 times the actual size - it seems I have to scale the image back down to A4 before I can start editing it? I tested this on A4 jpeg files I created on 2.6, and they also load on screen at massively enlarged sizes. how to get these images to display at their actual sizes?
View 2 Replies View RelatedI have an image with many layers. I want to cut a vertical strip out of the middle of one of the layers because I want to narrow the transparent gap between the left side of that layer and the right side. That is, my image has stuff on the left side and stuff on the right and a gap in the middle through which shows the pattern in the layers below, and I want to narrow that middle gap. I want to do the same thing as cutting a vertical strip down the middle of that top layer with scissors so I can scrunch the sides together, so less of the patterns on the layers behind shows through.
Is there any way to do this? It doesn't work when I simply select the area I want to cut and click "cut" or "clear" - those commands don't get rid of the canvas in that section, just the contents, which are transparent anyway.
I'm trying to avoid resizing the canvas and then laboriously reconstructing the layer with all the finicky alignment issues, because that seems unnecessarily time-consuming, when all I need to do is remove a gap in a blank section. I tried using guides to guillotine the image, but that, too, is turning out to be time-consuming in terms of reassembling the image. I know I must be missing something obvious - how does one simply remove a selection of the canvas (and not of the image itself) with the selection tool?
basically what I did was I wanted a certain part of an image and I used the eraser tool along with adding the alpha channel so I can get rid of everything in the image but a cropped version of it (basically erasing around what I want to keep). How do I fit the canvas to this oddly shaped image now?
You can say I want to create an icon but when I save it as a .png or .jpg, I get this white background replacing the alpha channel when I just want the cropped image itself. I tried going about using the free select tool, going around the image and then using the "Fit Canvas to Selection" option but that just takes way too long.
I have an image with 85 layers, let's say they are all 100x100 pixels.
The layers are all aligned on the top and left borders of the canvas.
The canvas is 100 pixels wide and 8500 pixels tall.
I want to put the first layer on the top of the canvas, then the secondlayer with its top border aligned with the bottom border of the firstlayer. Then the third layer just below the second one, etc. So that all 85layers are spread on the full height of the canvas.
Actually, some layers are less than 100 pixels tall. I still want thelayers to be one next to the other. So if my first layer is 60 pixels tall,the second layer must be moved at 0,60 in the canvas. And if the second oneis 90 pixels tall, the third one must me moved at 0,150.
How can I do that? Is there a plugin? It doesn't seem very hard to code in Scheme.
Is there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedI don't seem to be able to click on the canvas in GIMP. I installed a tablet(Wacom Bamboo) and assumed that the pen wasn't working correctly until I realised that I couldn't click with my mouse either. The mouse and tablet work fine in other programs. It didn't have the problem until I installed the driver for the tablet(I think). I can use any feature that doesn't involve clicking on the canvas(adjusting curves, scaling, changing the saturation, etc.), I just can't do things like make a selection, or use the paintbrush.
I'm using GIMP 2.6.11 on Ubuntu 11.04.
Just wanted to align some text with the canvas. Thinking I'd simply overlooked the feature, How do you align a layer to the canvas? Specifically, a text layer.
The answers I found:
Use mouse to drag layer to the center of canvas. (This does not result in the accuracy for which I was hoping, unless I do some math to determine and pinpoint the proper location and try to keep my hand steady.)
Cut, copy, paste. (This renders the text uneditable.)
There isn't an align feature?
I'm using Gimp 2.8 on Fedora 17 i686. I have noticed that when I cancel out of set image canvas size and return to set image canvas size I have no preview image. I was wondering if this is a problem with Gimp
View 1 Replies View RelatedAfter updating to GIMP2.8.4 I am seeing a constant problem with the canvas not updating after any change unless I move the cursor out of the image area. It starts updating immediately but if I move the cursor back it stops even if it hasn't finished redrawing. This is not just for image changes; the selection outline does not update either unless I move the cursor out of the image area! There's another problem with the selection outline - sometimes it just stops displaying, period, and I ave to use quick mask or save and close GIMP.
View 1 Replies View Related