Just working on an image idea, thought to try 'Distorts / Emboss' only to find that the function is greyed out. Haven't a clue what to do about it.
I have re-installed gimp and done a reboot with no change so I am stuck.
Specs - OS Ubuntu, Gimp 2.8 single window mode with ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu precise
I am using a trial download of PSE11, and find that some of the functions [that I have been using for many years on several iterations of PSE] are greyed out and not usuable. Is that becuase I haveatrial edition? I want ot use custom rotate to straghten a photo, and "straighten image" is not enough. Why can't I access "custom rotate"?
View 1 Replies View RelatedSomething strange here, just working on an image idea, thought to try 'Distorts / Emboss' only to find that the function is greyed out. Haven't a clue what to do about it.
I have re-installed gimp and done a reboot with no change so I am stuck.
Specs - OS Ubuntu, Gimp 2.8 single window mode with ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu precise
I want to take a simple black and white image (not even grayscale) and use it as a stamp to deform a wood grain image. Basically a footprint in the sand type of thing.
View 3 Replies View Relatedi dont know how to use or find the PCD function. All i have is a base however i need to make holes with 90 degrees on a 100 PCD
View 2 Replies View RelatedI'm using the 16.0.0 version of Illustrator CS6 and i'm really new to it. Under the Object menu, I cannot find any Expand-function that I've been told should be found there. Is this option only appearing in object menu during certain circumstances?
View 1 Replies View RelatedCan't seem to find a EDL or XML import function - aren't that in the pre release ?
View 4 Replies View RelatedIn the project panel there are several different ways to search through all of your media to find specific clips. Is there anything similar for the timeline?
For example - I have a 30 minute sequence with 7 tracks of dialogue. Each clip of dialogue is labeled with a line number from a script. When a producer comes over and asks "Can you quickly go to line 416?"...I'd like to be able to quickly do that. Avid has a function where you can perform a find in the timeline for specific file names.
Is there any function available to find out if a point is present on a line or not?
View 8 Replies View RelatedI cannot seem to find a fnction in Designer Pro X for making tables. Is there one in there somewhere? or not?
View 4 Replies View RelatedThe brush dynamics matrix is all greyed out and there is no way to activate it. Maybe Im doing something wrong. I understand that you can either set the brush dynamics preset or set the matrix. Also the curve editor doesnt seem to be working either.
View 11 Replies View RelatedOS: Ubuntu 11.04
Arch: AMD64
Desktop Manager: Gnome 3
I recently blew away my Ubuntu 10.10 and installed 11.04. Not liking Unity, I figured I would try Gnome 3. After getting Gnome 3 set up, I downloaded babl,gegl, and gimp tarballs and proceeded to install all sorts of dependencies(required and many optional ones) via apt-get packages.
I then compiled babl(0.1.4), gegl(0.1.6), glib(2.29.8) gtk+(2.24.5) and finally gimp 2.7.3(note that all the above are from the gimp.org ftp site. Prior to compiling gtk+, gimp failed on the make with some really strange errors, which is why I compiled my own copy. Also note, ALL of the above were compile into a different prefix with :
./configure --prefix=/home/joefrazierjr/opt
Once I finally got GIMP compiled, I can see my tablet in the input devices, but they are greyed out along with all of the below:
SynPS/2 Synaptics TouchPad
Virtual core XTEST Pointer
Wacom Bamboo Fun 6x8 cursor
Wacom Bamboo Fun 6x8 eraser
Wacom Bamboo Fun 6x8 pad
Wacom Bamboo Fun 6x8 stylus
The ONLY thing that is NOT greyed out is Core Pointer.
The main reason I complied is because for whatever reason,the PPA package available does not also install Python(but does let the tablet work).
Note that I am comfortable with "using" the shell, but am a power user in linux, so assume that I know nothing about linux in any replies. Also, if I need to remove, any of the compiled code and recompile, I assume running "make clean"will fix it up correctly?
Note, my Bamboo Fun works fine in MyPaint(with pressure sensitivity,etc), so the issue is with either GIMP compile itself or GTK appsin general(If MyPaint is GTK or not). Also, I still have the build folders, so if I need to link to any of the config.log files, I will put on my dropbox.
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
i just started using gimp on ubuntu 13.10 . almost half of the menu items are greyed out. most of the filters work or ar not greyed out, g'mic is greyed out and so is most of the stuff in the file menu (export, save, save as, etc.) . i already tried re-installing gimp from the software center with no prevail. this is how it was the first time i installed it on this new ubuntu 13.10 .
is there something that i can do to maybe refresh the entire gimp folder maybe? maybe delete it then re-install gimp. i really dont know if this would fix anything though.
this is really irritating. and no its not the "image RGB/indexed mode" problem.
im pretty sure i dont have anything installed (like some weird ubuntu restricted access fake file) that could interfere with the interface at all as this is a pretty fresh installation. the most i have installed that might even be close to interfering with the interface is "pipelight" which is for flash and silverlight, not gimp.
i even tried different color profiles and none of them work. i even downloaded the brand new color profiles from adobe. none of those work either.
the only way i got ALL of the menu options back, including g'mic, was opening gimp through raw therapee (basically adobe lightroom for ubuntu) which might be of some use in finding an answer to this?
i already have everything i need installed including the ubuntu restricted access extras and such.i just would like gimp to open normally with all the normal file menu options enabled like everyone elses and not be all greyed out ..
I'm trying out the new Sigma 24-105 DG lens with my 5D M II. The lens profile is not yet in the list of Sigma lenses. I checked and my LR is up to date with the latest version 5.3. Is there a way to find the lens profile to import for LR lens correction function? Or do I just need to wait until LR updates for new lenses?
View 5 Replies View RelatedThis is more a basic question, but something I have happen often. Why is it when I perform a ALT-Print Scrn on an active window [windows platform] and paste to a wordpad document, open PS and create new image and paste the image from the wordpad document to PS it is distorted?
Any help appreciated.
The reason I have to paste to wordpad first is I often have to complete documentation on systems that do not have access to PS so I paste to wordpad to save the clipboard images I need.
When I use the Cut or Clear function with a graphic design I can punch a hole right through a layer or layers. But with a jpeg photo and duplicate layers all I get is that the selected area turns opaque white. There are work arounds, but it would be simpler to be able to turn a selected area transparent. So what gives? Running Windows 7.
View 2 Replies View RelatedOne of the most fantastic features of Gimp was it's ability to use a MIDI controller such as this:
It's now not possible to resize brushes because Gimp has no scale function. Scale was much better than the new size which goes to an absurd 10000 pixel brush. This means you can't use set value from MIDI as is done here:
I have to mouse around in UI or use my Wacom strip. The brilliant ergonomics of Gimp via MIDI is ruined.
have come across this problem recently. when ever i open an image in photoshop, the image is distorted. have experimented with many tools.. but no solution..
Do i have to re - install it once again??
This problem started when I updated to Lightroom 3.4 on my new Windows 7 Toshiba Portege R700 laptop. I did not experience it with prior revs of Lightroom 3 on the same laptop. Here are the symptoms:
When I enter Develop, then some of my images stretch upwards when displayed on a second large monitor if the image is as wide as possible, and stretch sideways (inwards) on my laptop monitor if the image is already as tall as the laptop monitor allows. in either case, the image is distorted so that it is appears taller and thinner. When I exit back to Library mode then the image is normal in appearance again.Some images do the opposite and stretch downwards!The files are all RAW. It appears to be a problem only with Olympus RAW (.orf) files and not with Canon RAW (cr2). The same thing happens when I disconnect the secondary display.I can do this multiple times.I took an image, made a virtual copy, reset it and the same thing still happens.There is another similar post where the solution was to start with a fresh preview file. I tried that and it did not work (I closed lightroom, renamed the preview file, and then openned Lightroom again forcing it to create a fresh preview file.One some images, I find that my mask has shifted over. For example, I have an image where I desaturate everything apart from the main figure. Now, the main figure is partially desaturated, as if the mask has moved sideways when I export the image.
Any way to make the "click" function into a keyboard shortcut in gimp. I use a mouse, but the clicking interferes with my strokes (I like to hover my mouse gently. This way is faster and more presice for me.) I ould like to know if I can use a key like backslash or "v" to replace the clicking action when using brushes.
View 1 Replies View RelatedI am trying to use the function to outline a border to text with the function "Path to text" but no matter how I try the path will only use 16-19 letters in one row.
I have read several guides on how to do this and no one mention anything about this issue. As long as I have 16 letters on one line it works, but I have more it will just skip them.
I write the text:
12345678901234567890
Then I click an choose "path to text", but when I do it will only create a path of 1234567890123456 and skip the rest. If I write text on several rows it will use up to 16 letter on each row.
Is there an limit to "Path to text" .
I am in the process of creating a flier and I am running into a problem with my type. In my head line I am attempting to use an outter glow but when I do I get a choppy distortion on my letters. It isn't all that aparent when I look at it in photoshop but when I export it to a pdf you can tell and it is really obvious when I print it. There has be no noise added to any of the effects applied to the type. In fact the only other effect applied to the type is a gradient overlay.
I am using photoshop cs6 on a mac running 10.6.8
I recently placed text on an arc in Photoshop and found that it appears to stretch the text as well. I placed the same text on a circle in Illustrator and then placed it on top of the text in Photoshop. When the two lines of text were then made to have letters of the same height, the letters were not the same width (Photoshop letters were wider). Illustrator appears to maintain the aspect ratio of each letter when placing text on a curve while Photoshop does not.
Is this known to happen? Is there a way to place text on an arc in Photoshop that does not distort/deform the letters of the text in any way other than to place them on an arc?
I'm having trouble with the graphic interface distorting at random times in the top ribbon area. Graphics hardware acceleration is already off.
View 4 Replies View RelatedI'm working on headers and footers for a client to use in MS Word. The headers and footers are mostly text-based, and look bad in any rasterized image format, so I think the best option is to export to EMF.
Even though I have all of the fonts I'm using installed on Word, it's still treating some of them strangely. So I'm trying to convert the text to vector images with the Create Outlines command. But when I export the image to EMF, I end up with distorted text. It distorts the logo image portion too, but it's less noticeable than the text.
I'm using CS5 on an iMac running OS 10.6.8.
I am creating some icons with numbers on. I need them to be on a transparent background. I have created the main shape and I simple what to cut out the number that I have put in the middle so it will appear the same colour as the background. I have successfully done this with some of the icons by using the following process:
Create the Number with the text tool > Create Outline > Select Object and main Shape > Use Minus Front Path Finder Tool.
This was all going really well until I got to 4. When I minus the number object the shape distorts so the upright column of the 4 becomes wide then the original text version. The change is too much to ignore. The same problem happens with 10, 11 and 12. The problem appears to be with the upright columns but strangely is not a problem with the 1.
It looks like the path anchors are snaping to the grid I have no the Artboards. The scale of the distortion depends on the distance from the nearest gridline. I have tried turn off snap to grid and the grid itself but I still get the same result.
I would like to obtain a black and white image of a photograph of a book page.
My attempt to do this is by running the threshold function over theentire image. This appears to give the desired result, but onlylocally. It appears that the optimum parameters of the thresholdfunction vary by position (i.e., according to some scalar field), withone extreme in the center of the glare and then radiating outward. Sojust running the threshold function over the entire image withconstant parameters always gives sub-optimum contrast for 75% of theimage. Will I have to find a way to run the threshold function withnon-constant parameters, or is there some other tool to do the job?
Is it possible to enable in Gimp the function to rotate the canvas in real-time while drawing with the graphic tablet; like Sketch Book?
View 2 Replies View RelatedWhen resizing a vector group in Illustrator CS5 with a custom made symbol in the group I get distortion of the proportion of the shape.
Tried resizing with selection tool holding down shift or option
Turning off align to pixel grid in the transform panel
Turning off align to pixel grid in the symbol option
Checking Enabled Guides for 9-slice scaling is turned on
Checking Scale Stroke & Effects is turned off in preferences
I create pie graphs in illustrator for a financial sevices group. Every month when I update the data the format and colour of the graph distorts. I am spending too much time manually fixing the graphs.
View 3 Replies View Related
