I want to take some error warning from a computer program and change text, while maintaining the same shrift, color, etc.
So far, i've been using cloning. But if there is a great deal of letters, cloning becomes tedious pretty soon.
Just wondering if there exists some more elegant trick to do this job.
Basically, I'm trying to extract the text from the attachment showing below so that I can transfer it somewhere else. I seem to be getting stuck on the "Path from Text" part, I'm using it, but nothing happens. Do I need to be using the tool for all of the letters individually? but I've spent ages trying to sort this out.....Driving me bonkers. I'm using GIMP 2.8 BTW.
View 3 Replies View RelatedI have two images open, one is a .png with a transparent background, but when I paste it onto a colored background image, it loses the text color from the original. I probably need to be doing this with layers but I can't even figure out how to get both images on the same layers dialog.
View 5 Replies View RelatedI have several partially transparent GIFs.
I'm trying to layer them all on top of each other.
When I copy one partially transparent GIF and paste it on to the second partially transparent GIF the transparent section turns white and is no longer transparent.
Therefore covering up the contents of the prior GIF.
In short, please have a look at the three attached pictures, I would like to have all three on top of each other showing all buttons.
I've been reading how to add text to a photo on the web, but the pages I've hit don't seem to match my Install. E.g., [URL]..........
View 2 Replies View RelatedI am trying to use a picture to colour some text. The problem is that the text comes in the form of an image. So basically take the outline of the text and fill it with the picture. I am so confused with layers.
View 1 Replies View RelatedI have this picture i with some text, its a company name and a department name. I would like to add something in the end of the department name.
So my question is - is it possible to get the font from text on the picture and write some more text with that?
I would like to modify a text on a picture for a friend. Let me explain : here is the picture I'd like to modify :
[URL]....
I'd like to delete the facebook thing and replace it. But I don't know how to do it. I thought I would select and delete but the result is terrible because the color is not uniform, take a look at this :
[URL]....
The top of the sheet is okay, the rest is not...
Second question. How to make a text looks "real".
I have thought : let's take a picture of a someone holding a blank paper and add a message.
[URL].....
It's not bad but it doesn't look as if I had stamped the message. So I was wondering is there any tool to do so ? Or to make the text fit the picture. As you can see, the quality is not perfect, the first thing coming in my mind is "pixels". It seems we have two different kind of "pixelisation" (I don't know if it's the correct term for what I want to say) : an "old" picture with a new text...I tried the pixel filter it's not working fine.
Is it possible to copy or crop a portion of a layered picture and still retain the layers ?
If I copy merged I lose the layers and if I try to copy normally I only seem to copy one of the layers.
How do I do the effect for the blurred flower and text in this picture?
[URL]......
Also, what font is used and how do I do that effect?
I am a Paramedic Instructor and want to clean up some heart rhythms to make them more neat and presentable for use during class. Below is the sort of image I would be working with.
What I would like to do is remove only the black and gray lines (when they print out of the EKG machine some lines have some gray in them) and place them on a neater cleaner background as below
(The image above I found on a website where the creator has 100's of EKGs that this has been done with, but have been unable to get him to tell me how it was done)
Also let me know if another Adobe product would be more useful in this situation. I have CS6 Master Collection so you know what programs I have available to use.
I thought I was copying a picture from my Elements 10 catalogue into a slideshow I was creating under "My Pictures". I now want to add text to it. I opened organizer, found the photo, opened full photo edit and got the message that the file was missing. I browsed for it, found it quickly in the my pictures slideshow file, clickec and got a message asking if I wanted to reconnect it. I clicked yes and got the message that it was in the catalogue. Even more disturbing, I got a message that all files were disconnected. Neither the Missing Manual nor Kelby even have the words reconnect or disconnect in the index.
View 6 Replies View Relatedtrying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
Is there a way in the Develop Module to press the Previous button at the bottom of the page to copy all the settings from the previous picture used, but NOT the CROP?
View 2 Replies View RelatedWhen I copy properties from one paragraph frame to another, only font and its size is copied, not paragraph settings (spacing before/after paragraph, bullets, indentation etc.). I never had problems with this - it started a couple of days ago (the update??).
View 2 Replies View RelatedI paste Arabic font (a sentence in Arabic in Word for example) onto a text layer in photoshop, it compleatley switches the direction of the text and the sentence doesn't read as it was in word. This leads to us going through a very complicated process of saving it as a pdf and then importing as a vector.
Does anyone know how we just import Arabic text from another document so that PHotoshop (using CS3) renders it the right way around (words and individual 'letters')
When I use the rectangle select tool, hit copy, then paste into new image, I get nothing but an empty, transparent image the size of my selection.
I've successfully done this many times, but now, nothing.
my new image contains no image?
Is there a relatively simple, automated tool in gimp to apply one picture's environment lighting properties to another picture?
So for example if i cut out an object from one picture that has pretty warm lighting environment, and put it in a cold light background it will look pretty out of place obviously, and this is what I would like to resolve.
or how to position a picture in a specific location within a background picture.
View 3 Replies View RelatedWhat I want to do, is take the path tool, make a pattern around a picture (which is rectangle) placing it on a picture of a board like this...and then pull the picture horizontally, and vertically, to make it circular, to fit the perimeter of the board. If I understand it correctly, when you use the path tool...it allows you to make an image round (from rectangular) is that true?
View 1 Replies View RelatedI have just started working with GIMP, after years of using Photoshop, which I can't afford anymore. Most of the tools don't look that different from what I was used to in PS, but I ran into a problem right away: I don't seem to be able to cut an image and then paste the cut image as a new layer on top of another image. I creates a new layer alright, but I don't see the image I want to copy.
View 1 Replies View RelatedIs there any way that I can copy multiple layers?
If I hit copy and then paste it as a new image I only get the layer I had selected.
If I merge all the layers down to one, it takes a long time because I have to merge them one at a time. Then I have to undo all those merges to the original so I can still work with its layers, just to make a copy of the image I am working on.
And sometimes I want to copy layers from an image and actually keep them as layers in whatever it is I'm copying them to, and in that case my best option to to select each layer one at a time, copy it and paste it as a new layer in the other image. And this method doesn't always leave the layers lined up properly.
So, Is there any way that I can copy multiple layers?
I've got a problem with basic image editing in GIMP.The screenshots should give understanding. I have GIMP 2.6 on Windows 7.GIMP wont allow me to move anything around in the darker area of this image("IconOverlay.png" - attached).
I've tried reinstalling GIMP as well as deleting the user preferencesfolder. I've also tried copying the image into a new GIMP window and editing it inthat, but it doesn't work. This has never happened before on any other image I've edited.
I want to get rid of it, so i'm copying various parts of the background, and pasting them over the signpost. unfortunately, after pasting a section, i can't seem to deselect the newly pasted section. I've had a google and many forums are telling me to go Select -> None, but this is greyed out. I can save the picture, close it, and reopen in GIMP, but i dont want to do this everytime I paste.
I'm using 2.6.8 by the looks of it.
I can find tutorials and plugins and such to convert a picture into a cartoon picture... but is there a plug in or way to go from cartoon to RL (real life image photo)???
View 1 Replies View RelatedI have a pic with text on it, How do I change what it says while keeping the same look?
View 2 Replies View RelatedI have 2 layers of text in a .psd that I want to simply copy and paste into another .psd. I select both layers and link them together, though when I copy and paste into the other .psd only one of the layers is pasted. How do you do this?
View 1 Replies View RelatedWhen I drag a text from one page to another, the text increases in size. Not sure why.
View 4 Replies View RelatedCorel x5. When I copy text from an email or word document to a Corel file I need it to keep the same Font, Size & Color.of my Corel file template. But when I paste it, it keeps the Emails or Word Documents Font, Size & Color instead. I think I clicked on the wrong thing when I first installed Corel. I cannot locate my Corel disc to reinstall it.
View 4 Replies View RelatedIm trying to create a spoof of an image but I cant get the style of the text right. You know how when people take say, the snickers logo but replace the word "snickers" with something else.
View 2 Replies View RelatedI have text and arrows in paperspace that i can't get to display above the image which is in model space. i'm using draworder. i have tried sending text to front, sending image to back and also sending the Vports which display the image to back. i've also tried copying text out of the drawing and bring it back in and it still goes behind the image.
View 7 Replies View Related