Is it possible to copy or crop a portion of a layered picture and still retain the layers ?
If I copy merged I lose the layers and if I try to copy normally I only seem to copy one of the layers.
I have several partially transparent GIFs.
I'm trying to layer them all on top of each other.
When I copy one partially transparent GIF and paste it on to the second partially transparent GIF the transparent section turns white and is no longer transparent.
Therefore covering up the contents of the prior GIF.
In short, please have a look at the three attached pictures, I would like to have all three on top of each other showing all buttons.
I have to blend the color of a mannequin onto a picture of a face blended into the mannequin. I am absolutely stumped as to how to do this. And don't remember what feature would accomplish this.
So, how do you blend the color of a mannequin onto a picture layered over the mannequin keeping the features of the pictures?
I am a Paramedic Instructor and want to clean up some heart rhythms to make them more neat and presentable for use during class. Below is the sort of image I would be working with.
What I would like to do is remove only the black and gray lines (when they print out of the EKG machine some lines have some gray in them) and place them on a neater cleaner background as below
(The image above I found on a website where the creator has 100's of EKGs that this has been done with, but have been unable to get him to tell me how it was done)
Also let me know if another Adobe product would be more useful in this situation. I have CS6 Master Collection so you know what programs I have available to use.
I thought I was copying a picture from my Elements 10 catalogue into a slideshow I was creating under "My Pictures". I now want to add text to it. I opened organizer, found the photo, opened full photo edit and got the message that the file was missing. I browsed for it, found it quickly in the my pictures slideshow file, clickec and got a message asking if I wanted to reconnect it. I clicked yes and got the message that it was in the catalogue. Even more disturbing, I got a message that all files were disconnected. Neither the Missing Manual nor Kelby even have the words reconnect or disconnect in the index.
View 6 Replies View RelatedI want to take some error warning from a computer program and change text, while maintaining the same shrift, color, etc.
So far, i've been using cloning. But if there is a great deal of letters, cloning becomes tedious pretty soon.
Just wondering if there exists some more elegant trick to do this job.
Is there a way in the Develop Module to press the Previous button at the bottom of the page to copy all the settings from the previous picture used, but NOT the CROP?
View 2 Replies View Relatedcan i convert a non layered file to a layered file bases on used colors?
View 4 Replies View RelatedI need to get a multi-layered image into another multi-layered image keeping all the layers/effects of both images. Can't seem to just copy/paste and I don't seen import function.
View 2 Replies View RelatedI have to import a set of png's from Photoshop to Edge Animate. The actual source file is a Photoshop psd but I cannot import the psd into Edge so I have to painstakingly export each layer as a png and there are over 40 layers. Is there a way to take a layered Photoshop file and turn those layers into transparent pngs so when they import to Edge or another app the layers would remain intact but just as png's?
View 2 Replies View RelatedI have a map that I downloaded and it's in about 7 .tif files, are these layered? I'm assuming I need to put them all together to view the map, and I've never had any experience with layered .tif files. How do I view them? I open them in photoshop but I don't know how to combine them into one image. Do I need a special program for this?
View 2 Replies View RelatedI created a Photoshop file with text and background layers. The client wants me to place an animated GIF in the center of the file.
How do I get all but 3 layers which comprise the animated GIF to not go into the animated gif timeline on the bottom of the screen. I can only get this to work by turning off all the text and background layers. I need the timeline to just have 3 layers in it and only those layers move.
I think that "auto blend layers>panorama" is assumed to make panoramas from layers ... And, there is also "auto align layers" for making panoramas from layers.
I tried "auto blend layers>panorama" with an image and it can not make a panorama from the two layers trial image ... "auto align layers" can make a panorama easily from the same image.
So, I can see that there is a clear difference between the "auto align layers" and "auto blend layers>panorama" ...
But I could not understand the intention of designers of PS about the usage difference between the "auto align layers" and "auto blend layers>panorama"?
Why is it that when I save a file that has many, many layers to a PDF without layers as a copy that the file size is larger than flattening the layers and then saving the file as a copy to PDF? 19Mb vs. 5Mb?? Wouldn't saving a file without layers be the same as flattening the layers and then saving the file??
View 1 Replies View RelatedI have had this problem so much I have switched back to using CS5 Photoshop when I handle layers. For some reason when I have a multi-layered photoshop file in CS6 and I try to save - it gives me a program error. This doesnt happen all the time just when I have been working on a document for a long length of time ( maybe something to do with auto save?) The only way I can save the file is to flatten but then I loose all of my hard work and layers!
View 3 Replies View RelatedWhy can I not create a pdf file from CS6 that preserves my layers, which are also known as OCG's, Optional Content Groups? In "save as pdf", I have layers checked and I am indicating I want to preserve Photoshop functionality, which causes the PDF/X box to go to "None". What am I doing wrong? I know there is a script for saving each layer as a pdf automatically from which I could build the layered Acrobat file I want, but it I'd like a one-step process. There is every indication that this should happen, but it does not.
View 4 Replies View RelatedI have created layered templates in CS6. I've saved them both as psd and tif formats (an industry requirement). I have no problems reopening the files but some of my colleagues get an error when opening the tif file. This is the error message "This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead choose flatten to load composite data as a flattened image."
View 7 Replies View RelatedBasically, what i have is an image of a character. kind of a perspective view, 2.5D if you will :p
Each part of the character fits in a certain place in the layer order. He faces to the right, so the left arm/leg must be at the bottom, then the torso/head in the middle, and the right hand side of him at the top. It's a little more detailed than that, but you have the general gist of it, the order of each part must be maintained.
Now aside from that, i actually have two sets of parts. One is the base character, naked. And one is clothing/Armour for all those body parts. I'm planning to make several more outfits and right now it's getting kind of unmanageable.
Again, like the draw order quoted above, the outfit parts must also be in their correct place, each one exactly above the body part it goes on, and below the bodyparts that draw on top of it. So i end up with these two sets of layers interleaving, in a very messy way.
So, what i'd like to do, is figure out some way of sorting things a bit better. I'm not too familiar with the deeper workings of Photoshop, but i've heard of smart objects, linking layers, and grouping layers with the little folder button.
What i'd like to be able to do, would be, at a minimum, to toggle the visibility of an entire set of layers at once, without affecting the other sets. If it's possible, it'd also be nice to be able to transform, and use filters/adjustments/selections on an entire set of layers simultaneously, too.
What's absolutely important is that everything maintains it's proper position in the draw order, and everything is non-destructive. no merging of layers.
I'd like to be able to make all my auctions look like this one:
Prince William Kate Middleton Engagement British by CreativeClam
How do I do this? I'm assuming it would be an editable multi-layered PSD file but I don't know how to do the part that makes it LOOK like a mylar. I can do a LOT in Photoshop but there is a LOT I can't do
OK, I have an image of a webpage layout approx 800 x 1300 I need to convert this to a layered psd. I know I can take the image and use the pen tool and cut each slice and make them all layers which is nuts. I also know how to slice up an image in PS and save as images and slices and did that, now all those slices that PS saved for me I need to turn back into layers that will sit in a .psd follow? But I can't seem to find a tutorial anywhere on doing this. I'm in CS3 and maybe I have been working too hard but this is boggling my mind. I see thousands of ready for the web templates all in Photoshop layered .psd's how are these getting done?
View 2 Replies View RelatedI can no longer save layered .psd files to any folder. What does get saved is only a generic file symbol.
I'm using a Dell 8200 computer, 1GB of RAM, IntelPentium4 processer, Windows XP Professional,and a Canon MP780 multiple function printer.
[running Photoshop CS3 under Windows XP Pro/SP3 ]
I have a PSD file with about 14 layers. A few are hidden. I want to save as a jpg, so I go to file -> save as and save as a jpg file (the yellow alert icon shows next to "layers" in the save dialog). Yet the resulting jpg looks just fine. I've been doing this for years.
Today, support told me in case #180459305 that doing that would corrupt the jpg. They said that I need to first merge layers in the PSD file, then save as a jpg.
They also suggested that I post this question here. So here it is. Do I have to go through the extra step in manually flattening the PSD file (and potential pitfall of mistakenly saving it as a PSD and losing my layers forever)?
Is there any way to edit a layered .png file in Photoshop CS2?
I've got a layered .png file, and when I open it in Photoshop it's just one flat image.
If Photoshop can't open the file and preserve the layers, does anyone know Fireworks can save the .png as a layered .psd file that I can then edit?
I saved a layered PSD file in CS6 only to find it won't open in PSE11. It says it is uneditable or something like that and is already flattened with zero layers.
View 7 Replies View RelatedI took a time lapse of 240 photos of the highway below. What I want to do is create a background plate where all the cars are erased from the shot. The steps I've been doing are:
Open photos A & B in Photoshop (I'm using CS6)Drag photo B's background layer into A as a new layer and line up with A using 50% opacity and eyeballing it (is there an easier way to do this? the photos need to match exactly)Start erasing in obvious areas from layer BMerge Layers when there's nothing else to erase Repeat 1-4 with a new photo.
I don't think I'm doing this right though, because the baseline photo always has cars I can't erase. I can do the reverse, and take photo A into another B photo, but it just feels like the way I'm doing this is wrong.
Is there a cleaner, more precise way to do this? If I've added a layer with no cars on top of the background layer, shouldn't I be able to erase the cars from the background layer?
how i could possibly make a wireframe view of a psd that has already been created. I have a website design, all individually layered, what i need to do is get a white background and a black line stroke rounch each element.
View 1 Replies View RelatedI have been using Photoshop CS and have found it very easy to use and navigate and was looking very forward to getting CS5.
Anyway, I have been stumbling around CS5 for a few days now and opened up a template I created in CS. This template had 2 main layers - 1) was the case or card holder and 2) was the colour of the card backs. These are then opened up in Flash as part of the slideshow.
Now, the case layer had a number of filters mainly the bevel and emboss which remained static as this was the case. The colour of the case needs to change to reflect the colour of the actual case. Another issue as well, is where is the little icon at the bottom of the Actions/History palette gone that allows you to change these filters? I cannot find the Bevel filter in the Filters menu.
how I can open the older psd files in CS5 complete with the layers (is this something that has been dropped) and also tell me where the filter button on the Actions/History palette has gone?
I am sure this is a simple thing to do but ... I am trying to copy and paste or to cut and move one image onto another. For example, say the background is a scenery photo showing lots of sky. If I move a new picture or a bird flying into the sky in the background it LOOKS pasted on top. I am sure there is some way of blending the edges a tiny bit to make it look more seemless but have not suceeded in finding it yet. I can put a spot of color into the sky then soften the edges ... but not soften edges of an added image that may have multiple colors.
View 5 Replies View RelatedHow do I get an ID CS4 layered document into PS CS4 with the layers intact for further editing there?
View 4 Replies View RelatedAt tut "Multi-Layered Ring effect", step 4 we find this paragraph:
"Rename this channel to bevel. Once you have renamed the channel to bevel go to Filter/Blur/Guassian Blur and choose a value of 8. Then Guassian Blur it again with a value of 5, and one more time with a value of 1."
Why can't we put a bigger value to the gaussian blur effect, instead of repeating it three times with differents values? If i put 14 for the Gaussian value once, isn't it return with the same effect?
I have a large 300 M layered pdf file that when I attempt to open eventually pops up the "not enough memory (RAM) message.
I am on a windows XP Power Spec computer with 1.97 GB RAM I have allocated 1106 MB for memory useage, 12 history states and 8 cache level.
I have a 187 GB Seagate exterior harddrive as my main scratch disk and a mirrored main drive C with 154 GB of free space as my second scratch disk.
I also experience a canvas disapearance occasionally when using the polygonnal lasso tool. I can be clicking along and all of the sudden the image disapears until I click again. Annoying but not unworkable.