CorelDRAW X6 :: Create A 3D Elliptical?
May 12, 2013I want to create a raised 3D elliptical. The thing is, I want to have the center recessed so i can drop in a carbon fiber insert .
View 14 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X6 :: How To Create Elliptical Radial Fill Into Object
Oct 2, 2012Is there a way by which i can create an elliptical shaped radial fill into any object in coreldraw x6? Currently coreldraw has similar fill tools like in adobe illustrator. Both support linear and radial fills, but adobe illustrator has a way by which the circular radial fill can be squeezed, and be given more of an elliptical radial fill shape.Cann we have some way by which we can squeeze the radial gradient fill into more of an elliptical shape in coreldraw? That fucntion greatly supports more natural looking radial fills into objects. Can it be possibly done without using mesh tools? i am attaching an adobe illustrator screenshot to point out what i am asking for.
View 11 Replies View RelatedAutoCad :: Cannot Create Region - Elliptical Arc And Sline
Nov 14, 2011geometrical shape as I have been unable to create a region out of it using the Boundary Command. I have also tried the Polyline Command without success. Is the problem related to the Elliptical Arc or Spline present in the drawing? If so, what can be done?
Boundary.dwg
CorelDRAW Graphics Suite X6 :: Unable To Find Macro To Perform Elliptical Fills?
Aug 7, 2012I have been unable to find a macro to perform elliptical fills, or for dynamically interactive fractal/"plasma" fills.
It would seem to me, that these could have already been written by any of the experienced macro programmers for CorelDraw. No interest, or are these sort of fills too difficult to programmatically implement through a macro?
Photoshop :: Double Elliptical
Oct 20, 2005Is it possible to create a double Elliptical Marquee, one large and one small with the smaller one inside the larger one so that I can fill the space between the two of them with a colour.
Whenever I try to do it the first circle I selected disappears as soon as I try to create the second one.
Photoshop :: Elliptical Tool
Apr 13, 2006I used the elliptical tool around the one of the eye and copied and moved it to the kids eyes when than man's eyes disappearred . How do I do to put them ?
View 4 Replies View RelatedPhotoshop :: Can't Find Elliptical Marquee In CS6
Sep 24, 2013When I go to my Rectangular tool there in no Circle or Elliptical tool under it how do I load it in?
View 3 Replies View RelatedPhotoshop :: Elliptical Marquee Tool In CS6 / Mac
Oct 17, 2012I have CS6 and did the newest update yesterday. I'm working on Mac OS X 10.6.8. The elliptical tool doesn't function anymore correctly. If I want to make an ellipse or circle first it looks normal but if I let go the mouse, it changes the shape in another form like square.
View 9 Replies View RelatedPhotoshop :: Elliptical Marquee Tool
Dec 19, 2007I have the new cs3 and for some reason I can't find my Elliptic Marquee tool ?
View 2 Replies View RelatedPhotoshop :: Circular Or Elliptical Crop
Aug 26, 2008I want to crop a circular or elliptical region from an image. I presume that one begins by creating a path, but after that, I'm getting nowhere.
the elliptical marquee tool...is this part of the solution?
Photoshop :: Elliptical Marquee Tool
Feb 17, 2008I'm trying to use the Elliptical Marquee Tool in Photoshop cs3 extended to draw out a circle, however the circle is not a circle at all? It draws out a plus sign instead. For the life of me I can't figure how to set it to draw out a circle like it should.
View 12 Replies View RelatedPhotoshop :: CS6 Lighting And Elliptical Navigation Tools Don't Appear
Jul 23, 2012when i open the lighting filter, the anchor points and the elliptical navigation tools don't appear.is there anywhere on photoshop i can activate to show them.
View 19 Replies View RelatedAutoCAD Inventor :: Sheet Metal Elliptical
Jan 6, 2012I need a flat pattern for this part but it seems impossible. STEP 2 illustrate the desirable result.
View 7 Replies View RelatedPhotoshop :: Elliptical Marquee Tool Not Showing
May 20, 2006am using Photoshop CS 2 and the first thing you have to do is draw a circle, but my elliptical tool isn't in the toolbox. There is a square, but no circle.
View 2 Replies View RelatedPhotoshop :: PS CS4: Crop In An Circular Elliptical Shape?
Jan 13, 2009how is it possible to simply crop in an circularelliptical shape?
View 12 Replies View RelatedAutoCad :: Plotting In Elliptical Dished Head
Aug 12, 2012plotting in autocad elliptical dished head
KR=925.54
CR=4808
SF=18
Do=6010
Pl=8t CS
AutoCad 3D :: Draw Elliptical Coil Spring
Nov 13, 2013I am trying to draw an elliptical coil spring with top and bottom radius of 2 in and center radius of 3 in with 5 turns and spring ht of 5 in. the wire guage is 0.1in.
I could draw a cylindrical spring with helix and sweep command but don't know how to draw an elliptical coil spring. What are the commands or steps to get it. Also, I have problems in getting dimensions of radius and height for the coil spring. I use autocad 2014.
AutoCad :: Dynamic Block Of Elliptical Head
Nov 23, 2011where I can find a dynamic block of an elliptical head? Or a parametric example? Specifically, I need a 2:1 ASME elliptical head.
View 3 Replies View RelatedCorelDRAW X5 :: Create Object With A Size / Create Other Objects With Other Sizes
Sep 19, 2011Let's say, for example, that i create an object with a size, then i create other objects with other sizes.
When I try to see the size of the first object created it says that has the same size like the other objects which have other sizes (it's even obvius cause they r bigger on my screen:D).With all the other versions of Corel i didn't had those problems, but X5 does that.
AutoCAD Civil 3D :: Labeling Round And Elliptical Pipes
Jun 11, 2013I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
View 9 Replies View RelatedPhotoshop :: Can't Seem To Enter In Width/height With Elliptical Marque?
Aug 14, 2006when I select teh elliptical marque tool,
the width and height measurements are greyed out so that i cannot input anything?
Photoshop :: Elliptical Tool Not Giving Solid Stroke
Jun 24, 2006I use the elliptical tool to well...make an elliptical figure, I have issues when I stroke it.
It never gives me a solid stroke, it always has a feathery effect.
Is there anyway I can change this to a solid stroke?
3ds Max Modeling :: Curved Wall With A Slight Grade - Elliptical
Sep 24, 2013I'm tryin to create an an elliptical wall. 6" Thick.It needs to go from 48" at one end and lower to 36" as it sweeps around the ellipse. (It's only an arc of the ellipse and not completely closed).
View 4 Replies View RelatedAutoCAD Civil 3D :: Labeling Round / Elliptical Pipes
Jun 6, 2013I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
I've attached a pdf of the structure in question.
AutoCAD Civil 3D :: Elliptical Arch Pipe - Height?
Oct 1, 2013I need to put a 42 x 29 Arch Pipe in my drawing. I found a 44 x 27 in the elliptical arch catalog. But I can't get it to let me create one that's 42 x 29.
And I'm also having trouble making a label for it. This is one of three culvert pipes in this network. The other two are round 36" CMP. The label for those says XX' of 36" POLY-COATED CMP @ x.xx%. Once I need the label for this third pipe to show as XX' of 42" x 29" ARCH PIPE @ x.xx%.
When I tried to make the label style, I saw "Pipe Inner Diameter or Width". But I didn't see one for height.
AutoCAD 2010 :: Sweep Along Spline Made Of Elliptical Arc And Line?
Aug 15, 2013I try to sweep along spline that made of elliptical arc and line.
Funny thing that I was able to create a solid few days ago by doing this method. Now I can't!
I tried even reload Autocad.
Photoshop Elements :: Using Elliptical Or Marquee Tool - No Pixel Selected
Jul 16, 2013What action should I take when using elliptical or any other marque tool to the message ''no pixels selected"?
View 1 Replies View RelatedPhotoshop Elements :: Presenter Selects Elliptical Marquee Tool To Edit Cuts
Dec 26, 2013I am following a tutorial Using Layers in PSE 11. The presenter selects the Elliptical Marquee tool to edit cuts. I do not see the Elliptical Marquee tool in my PSE 11?
View 2 Replies View RelatedCorel PHOTO-PAINT X3 :: Transparent Edges On Elliptical Photo
May 6, 2012In a photo, I cut out an elliptical or round face.I saved the cutt image as .; "New from clipboard" No problem, the background is now transparent.
But now I want to make the edges of the oval or round image transparent.(then I want to put the result image on another image)
How can I make the edges transparent with Corel Photo Paint (or Corel Draw)?
CorelDRAW X6 :: How To Create Glowing ORB
Jul 21, 2013How can I create a glowing orb like the one on the left?I try with radial fountain fill, radial transparency, blend, but the result is not as natural.
View 13 Replies View RelatedCorelDRAW X6 :: How To Create Knitted Hat
Mar 27, 2013I'm working on a portrait that I need to create a knitted hat.
View 10 Replies View Related