CorelDRAW X6 :: UserForm Scroll Bar?
Jul 16, 2013
Im trying to do a rotate left and Rotate right. I want the scroll to default in the middle so i can rotate left or right. Possible?
I just need an example of something similiar. I dont need my whole code written out for me (at least i hope not yet).
I want an example - but not exactly written out with a fully fuctional rotating macro i didnt do add on my own.
I cannot work on flowcharting alone. Or is the ScrollBar the best option for rotating?
View 1 Replies
ADVERTISEMENT
Jul 8, 2012
I'm trying my noob hand at making fancy scroll graphics. I am not sure if it's naturally a time consuming task or if there is an easier way (which I haven't discovered yet) in CorelDRAW X5.Here is the closest example I can find on what I am trying to do:
You will note that the lines in the Scroll varies width and it is a symmetrical graphic.What I want to know, is there an easy way to recreate something like this by scratch (not doing PowerTrace)?Or is it a time consuming project using the shape tool and adjusting nodes?
View 7 Replies
View Related
Feb 18, 2013
I've tried everything I can to adjust my mouse's scroll wheel to pan as opposed to zoom and I just can't seem to get it.Is that an option they got rid of?
View 9 Replies
View Related
Apr 10, 2013
Is it possible to adjust the behavior of Corel Draw X5 in order to have the scroll wheel of the mouse behave like the scrolling action on a web browser. I would like a vertical scroll to vertically scroll the design when I am zoomed in and some of the design continues beyond the current view. Also, I have a mouse that can scroll horizontally when the scroll wheel is nudged from side to side, so I would like to have a horizontal scroll as well, if possible.
View 1 Replies
View Related
Nov 27, 2012
I have become very attached to having the mouse scroll wheel 'auto center the view at the cursor point' when I scroll in and out...I am not too happy with the new 'hold the wheel down and move the screen position' feature on x6. Can the old wheel configuration/centering be activated in x6?
View 5 Replies
View Related
Jun 13, 2012
I used to have x4 . One of the features I like is wherever you place the cursor and use your the scroll wheel on the mouse, it will zoom in where the cursor is.
When i switched to x5 , it doesnt center to the cursor. Is that a glitch? is there a way im doing it wrong or any setting i need to fix?
View 2 Replies
View Related
Mar 27, 2011
If I use the scroll wheel on my mouse in X3 it changes the zoom and does not scroll.
Using the same in X5 works OK and scrolls.
How I can change a setting somewhere so that it scrolls in X3
View 5 Replies
View Related
Mar 27, 2009
I remember back in 8 or 9 when you could use the scroll mouse to "scroll". But in 11 or 12 it changed to "zoom".there is a way to change it back to scroll?
[URL]
View 12 Replies
View Related
Nov 29, 2012
Regarding the conversion of some WinAPI fucntions to 64 bit.Been banging my head on this one for a while. I just can't seem to get it right no matter what I try.I think I have converted everything but it still crashes X6 after a few scrolls of the list box. I think it is corrupting the stack but I'm not sure how to fix it. "The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.
View 3 Replies
View Related
Dec 30, 2011
Type: sch to run macro.
On the userform choose "choose 2 points"
how to display the Y distance and X distance in textboxes ?
View 5 Replies
View Related
Dec 19, 2013
I am in the process of making a form that displays the parts to an assembly in a list file. When i click the part, i want to show a preview of that part on the form. What object in the VBA window should i be using? i cant find anything but im sure its a feature that is available
View 1 Replies
View Related
Jul 2, 2012
I am trying to get a dialog box that i can select a path from. Im using it to make a script writer in vba. I have tried a few different ways. Ive tried using the "microsoft common dialog box" it says i dont have a license to do it.. or something... the other way is to add a reference through tools, and with like "textbox5.text" something that made no sense...
View 2 Replies
View Related
Mar 2, 2011
I have come to a road block, I am for a lost of how to connect the information that i type into textboxs and to change the values of dimensional constraint parameters ex. d1 d2 d3
View 4 Replies
View Related
Apr 24, 2013
How do you open a .htm file and set it as the focused window within an Inventor VBA prog from a button on a userform?
I just want to add a quick page for a program I've cobbled together.
View 2 Replies
View Related
Aug 14, 2013
when I select several objects and try to deselect some of them in the object manager the list scrolls down after each click. This happens only in long lists when I deselect objects that are rather in top of the list. It then scrolls until the end of the list and I have to scroll up again for deselecting any further object. Can this be fixed?
Furthermore I would like to know if there is any way to select/deselect by a filter? For example: Deselect all objects that are of the type text or all curves that have a border.
View 3 Replies
View Related
Dec 3, 2002
how could i coloured the scrollbar.and what is image slicing?
View 2 Replies
View Related
Dec 24, 2008
Running Adobe Photoshop CS3
Windows XP Pro Version 2002 Service Pack 3
When I check the "Zoom with Scroll Wheel" box in Preferences > General:
-using zoom tool, scroll wheel will zoom out to the smallest size, but will only zoom in until image is slightly larger than the file window then slides the image left and right or up and down depending on size of file window. When image is slightly larger than the file window, zoom out doesn't work anymore
-using Alt + Scroll does nothing
-Ctrl + Scroll zooms image the way Alt + Scroll should
When I UNcheck the "Zoom with Scroll Wheel" box in Preferences > General:
-using Alt + Scroll scroll wheel will zoom out to the smallest size, but will only zoom in until image is slightly larger than the file window then will neither zoom in or out anymore
-using Ctrl + Scroll slides the image left and right
In either preference setting, using ALT key causes letters for menus in the tool bar to be underlined
View 1 Replies
View Related
Apr 17, 2009
I have no problem using the hand tool/spacebar to scroll around an image when zoomed into it, but as soon as I can see the whole thing I can't scroll around anymore and its just locked to the center I am a After Effects user so I find this a bit annoying that I can't do this, so I figure there MUST be a setting somewhere I could change to enable it.
View 9 Replies
View Related
May 21, 2007
I use the pencil/brush tool and hold down shift and draw my line, It works great for small lines, but when I have to go off my current screen space, photoshop will FUCKING FLY down to the end of the document, leaving a line through the whole thing. The area where it doesnt move the document to where it shoots down is so sensitive.
if there is anyway to change the scroll speed, so i can make my lines in peace.
View 8 Replies
View Related
Mar 11, 2008
I mouse scroll a lot and because my right hand is old and shaky it hits the screen edge frequently and an unwanted menu always pops up.
View 3 Replies
View Related
Feb 23, 2011
I am nearly done with my site and realized I forgot to insert a scroll box like I put on my other site via HTML. I haven't found a "form" widget that will allow me to insert a scroll box that I can then input text into for readers to, well, scroll through!
I am using Xara Web Designer 6 - love it by the way, but would like to know how to insert a scroll box for my Testimonials page, as stated above. My browser is FFox.
I know is has to be something simple but I can't find it. Have perused the forum and didn't find precisely what I was looking for. I did read a couple of posts about iframes but I understood those to be utilized for opening other sites within your site.
View 2 Replies
View Related
Jan 6, 2013
I created an an app that uses a paletteset, and displays an usercontrol in it. I want to add a scroll to the paletteset. As when I resize it for editing the dwg file, The paletteset data below cannot be viewed without a scrol bar. get the scroll bar.
Autodesk.AutoCAD.Windows.PaletteSet m_ps = new Autodesk.AutoCAD.Windows.PaletteSet("Object Data");UC uControl = new UC();m_ps.Add("Object Data", uControl ); m_ps.Visible = true;
paletteset properties does have any properties related to scrollbar.
View 3 Replies
View Related
Aug 8, 2012
Using the new caracter font scroll feature in CS6. When scrolling through fonts by highlighting in the carater box and watching my type change from font to font, it will come to a stop at certain fonts.
View 3 Replies
View Related
Jun 27, 2012
I have Illustrator CS5 and I am having problems with my fonts. I like to type my text, highlight it, and then click on the font I am using and scroll down so I can see the text I've type changed until I find the font I want.
However, I am having some issues - it only seems to go through fonts in sections. I have a lot of fonts on my computer but I cant scroll through more than about 10/15 without it either jumping to the end/bottom font or going back to the font I started on.
View 6 Replies
View Related
Jul 2, 2013
I have a problem with "new scroll feature" in Photoshop CS6 - I didn't find any discussion about that in whole internet (maybe I used bad keywords for the finding) How can I turn off this annoying horizontal scroll feature?
I over and over again do the same - by mistake scrolling horizontally instead vertically..
View 1 Replies
View Related
Feb 18, 2012
what the function is of the small rectangle (left under in the VSX4 screen) which, when hit shows "Automatically Scroll Timeline" .
View 5 Replies
View Related
Jan 16, 2013
The vertical scroll bar don't really bother me, it's the bottom scroll bar that I mostly want to hide. I never use them and the horizontal one take too much space that hide some "tabs". I know I can "minimize" the horizontal one, but I have to do it every single time I start AutoCAD. So I've search a way to hide them but come with nothing.
View 5 Replies
View Related
Apr 29, 2011
I have a request for a project to put in a scroll-type border around a map however I can not find anything in autocad that would work as a viewport border or linetype. I could possibly could use a graphic and scale around the layout but my choices are limited .
View 2 Replies
View Related
Mar 5, 2003
how do you make the custom scroll bars for web pages?
View 1 Replies
View Related
Apr 12, 2006
how to adjust the scroll rate when you zoom in on an image? Back in version 5, PS used to automatically adjust the scroll rate when you zoom in on a pic so you're not scrolling really fast past the area you're trying to work on, but now (using PS7) when I zoom in on an area of a picture, the scroll rate doesn't seem to change so when I try to just slide a few pixels horizontally or vertically, it quickly jumps to the far end of the picture.
View 4 Replies
View Related
Aug 15, 2007
In one of the Photoshop view mode (if you press F)..you can scroll beyond the border of the image. I love this feature, but I cant do this in the normal view.. is there any way to enable this?
Not sure if I exlpained it clearly.this option enables you to slide the red square (in the nav box)..outside of the viewer.. normally it stops when it hits the border..
View 1 Replies
View Related
