CorelDRAW X6 :: PDF Export - No Title Name
Apr 9, 2013
We are an Offset Print company and our Designers and Pre Press Operators have used CorelDraw for some years now. Their workstations run Windows XP and Windows 7 and all use CorelDraw x6.
Our Problem is this: When we create a pdf in CorelDraw x6 via File - Export... the resulting pdf is created with no pdf Title name. This Title name can be viewed when the pdf is opened in Acrobat and going to File - Properties.
Using CorelDraw x5, which we have just upgraded from, creating a pdf via File - Export... resulted in a pdf that had a Title that was the same as the File name of the Corel document that it was exported from.
Because in the held ques of our DPX Image setter any pdf without a Title name is simply displayed as "Untitled". It then takes some guesswork and previewing of these files in the held que to determine which job is which. This also becomes a bigger problem if we wish to re-burn a set of plates at a later date as then it is a time consuming task to preview files from our Image setter's printed que.
So our question is: Is there a setting we can change in CorelDraw x6 that once set will then cause all pdfs (exported from CorelDraw x6) to automatically have a Title ?
(There was no such setting in CorelDraw x5 - the Title was simply added to exported pdfs automatically).
View 6 Replies
ADVERTISEMENT
Sep 2, 2008
I have an Inventor 2009 idw template that I have setup for export to AutoCAD. Once it's in AutoCAD format I have to run a script file from my customer that checked attributed fields in certain blocks in the AutoCAD file. In IV2008 the title block names were changed on export to adding "title blocks" to the beginning. Which I delt with. But now in IV2009 all the TAG names in each block are also renamed on export to adding "_001" to the end of each TAG name. Is there any way to keep the same naming on export to AutoCAD for blocks and sketch symbols so I don't have a write a bunch of script files for the AutoCAD file?
View 5 Replies
View Related
May 9, 2013
How to export title block attribute text .. in a order from different layout .? file ext .xls or .txt i got a tool named Autocad Automation tool but it not work very well autocad have data extraction - its also came all text .. and not in order .. can we develop the any lisp for that ?.
View 4 Replies
View Related
May 17, 2013
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
View 3 Replies
View Related
Nov 12, 2013
I'm developing a custom docker, as per this post. By default, the title of the docker will be set to the name of the class that implements the UserControl. How can this title be changed into something more meaningful?
View 1 Replies
View Related
Oct 23, 2012
I am running Corel x4, and have a floating colour palette docker that has 'slipped' off screen. Because I cant access/reach the title bar, I cannot redock or move it. I have tried closing the program & restarting, even in Corel x4 default Workspace, but when I open the program the docker is still partially off screen...
View 2 Replies
View Related
Mar 21, 2013
I have used CDPhPaint11 many years. My computer has Windows XP. All the applications have functioned well until I recently foud out that when I open my CDPhPaint, the Titel bar (the blue one) does not appear at all. If I want to close the application, I have to use "File" option. The symbolls X, -, and "squeres"are not visible. They are in other CD application on the right upper corner. What is the problem with the TitelBar? I tried to put the program anew tro computer.
View 2 Replies
View Related
Nov 6, 2013
I am making a book cover. Given an existing photo for the background, I want to overlay some text (title and author), move it around, resize it, change fonts, choose font color and outline, etc. When I have settled on the text properties, I want to try it on various background photos without redoing the text properties each time. What is the best way to do this?
View 1 Replies
View Related
Jul 24, 2013
trying to figure out a way to use imposition to merge images from multiple pages on to a single page while maintaining a constant element (title block) on the page.
1. Creating a drawing of a sign for client proof/approval
2. Use print merge to create duplicates of that sign on separate pages with the varying messages
3. Use imposition to cluster several signs from the separate pages I now have on to a single page
4. (Problem Step) Figure out how to maintain a title block on my page of now clustered signs
I'm going to attempt to post an image of the page style I want with the title block. What I'd like is what is shown here only with some way to automate it so I can have multiple versions of that sign show up on this same page.
View 7 Replies
View Related
Aug 14, 2013
i have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
View 3 Replies
View Related
Nov 18, 2012
I added a title to my movie but the title is showing up on random clips now.
View 1 Replies
View Related
Sep 10, 2012
Any method when in the Library module to quickly edit the Title and Caption per image without having to use the mouse to click in the Title box each time. For instance - my current workflow is a bunch of products with their own SKU titles. Usually I would follow this step:
1. Import images from Camera -> Lightroom
2. Open Library and click on first image, select the Title field and enter the SKU (for instance : HG4356)
3. Now I would click in Title and type in "PROFILE" or "TOP" or "SIDE"
4. I would then use the right hand key on the keyboard to move to the next image in my filmstrip and then have to use the mouse to click into the Title field again.
5. Once all these images are completey named, I select them all and then select Library -> Rename Photos and use the Title_Caption as my fields and rename all my files to the correct SKU names.
I can usually automate option 3 somewhat by selecting all the PROFILE views and doing a sync etc... but the SKU section gets a bit tedious when having to mouse click each time into the field. Ideally, I would like a "Naming" feature where it asks for the name, upon typing it in and pressing enter, it jumps to the next image, into the same field and you can start typing again.
I know its sounds a bit lazy - but when you have over a 1000+ images to rename - it does take its time - and anything to speed up this process.
View 2 Replies
View Related
Apr 26, 2013
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
View 9 Replies
View Related
Jun 11, 2012
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies
View Related
Oct 30, 2012
Is it possible to get paragraph text Headline (Title) & body text applied by style at one click without selecting each separately. If yes, how we can do? If not possible, will it be possible in update or next ver. 7
View 1 Replies
View Related
Oct 22, 2013
It goes like this: I have poster created in Corel X6 home & student version. I try to Export it to JPG or GIF but the Corel just Shuts down. Before it shuts down there appears a statement about their failure and question if I want save it and close program and two other options.
View 2 Replies
View Related
Jun 15, 2012
As I am corelian, i am using corel for emailer also, its great but sometimes only facing problem while exporting object for web i.e. suppose I require 650px of jpg or png image size and i put the same value but output image was not the same size it might be 647px or 648px and sometimes it give me thin white line either side of the image (left or right). it created problem in emailer's layout so i have to export it in larger size e.g 670px and then open into photoshop and resize into 650px.
View 2 Replies
View Related
Nov 12, 2012
We just upgraded from Corel X4 to X6. When exporting a file into tiff in X6 , some images are creating extra lines that run into space. The images are made form cgm files, have not the best quality and relative old but in X4 I never had a problem with that.2678.test_c_drw_000_X4.tif4722.test_c_drw_000_x6.tif
Any new setting that needs to be on or off ?
I noticed that in X4 there is an option to apply ICC profile which I can't find in X6.Does this influence this?
View 1 Replies
View Related
Mar 8, 2013
I am trying to export my corel draw x6 file as a dxf or dwg file to import into sketchup. When I do this it drastically alters the lines in my drawing. It did not do this in x4. I know that it changes my curves into a bunch of line segments and I am okay with that. What I have a problem with is that it is changing my straight lines into line segments that are not straight. Any way to successfully import my corel drawing into sketchup?
View 2 Replies
View Related
Mar 10, 2010
Im sure there must be something im missing here with the PNG export settings. I like the way the new export window appears but I cant figure out how to export from Draw to a PNG with a transparent matte of a color picked color.
How I did it in X4 was to chose to export to PNG, and when the window appeared to select a color for the transparent area, a color picker was used. Whatever I do with X5, i cant do it .
View 14 Replies
View Related
Apr 9, 2012
Some days ago, I installed the x6 version. Now I find that, when export to Tif using x6 with the same settings and the same origin file, the file size is almose 3 more times then when using x5.
More Details:
I always use lZW compression, than the color mode I select paletted, and the final, choose document palette.
View 6 Replies
View Related
Oct 5, 2012
leopard red platter jpg.jpg
Im trying to export my image to jpg in coreldraw x5. When Im on the original screen in the program it doesnt show the lines but it does when I try to export in jpg format. Its only the pattern fill that shows the white lines and it shows in every pattern fill that I try to export.
View 6 Replies
View Related
Jul 8, 2011
we use CorelDraw X5 to make cartographies on building plans with several layers of - mostly - polylines drawings (one layer = one building material type or one weathering form type) and we must give them back to architects who use AutoCAD.
We already tried several times to export the .cdr to .dxf or .dwg files, but till now, the architect seems to be able to open the files, but our cartographie is quite illegible: only some parts of the layers are visible and it seems that some layers are not visible at all...
View 7 Replies
View Related
Mar 30, 2011
how can we keep a custom pantone name that we gave in corel when its exported at pdf..
Corel is changing the name and we cannot see the actual name that we gave at the final pdf...
View 5 Replies
View Related
Feb 17, 2013
screenprint.jpg
I have been trying to export numerous files from Corel X4 to an SVG format, individually and using the Batch Export script. These files are setup in Corel as 640x480 px and when I go to export them the page default is 600x600 pix, it will not let me change the page size to 640x480, it remains either 640x640 or 480x480.
In addition to this glitch, when I open the file in Inkscape, the page size is 14400x14400 px and when I change the page size in Inkscape to 640x480 then the drawing is so far off the page to the lower right extent that it is nearly impossible to find.
This is not limited to Inkscape when opening the file, it also behaves the same way in Illustrator and several other software packages. It is also not my Corel install, as I have Corel on several other computers. It works just fine on one of them, the other three it is just like described above.
I have tried creating new files, rebooting and nothing changes. The odd thing is that it has worked fine on these computers previously. It makes me think that once the batch script is run, it corrupts something?
View 8 Replies
View Related
Nov 22, 2012
I am exporting some graphics to PNG from Corel draw, but the colours are coming out ridiculous looking. The nice, wintry green, is flourescent green. I am using the RGB colour palette and exporting to RGB 24bit - is that correct?
View 6 Replies
View Related
Mar 8, 2013
Both printing and exporting is disabled, but only with one file, others are fine. How to fix it? No, it's not the trial version.
View 5 Replies
View Related
Jul 18, 2013
Whenever I try to export a graphic as a jpeg the program crashes. I tried clicking off the "enable background tasks" option that seemed to fis eps exports.
View 9 Replies
View Related
Nov 10, 2012
If you use win 7 64 bit and corel x4, try to export to png or jpg 330 x 250 pixels. Does it works fine or it exports to 330 x 249 like in my case.
View 1 Replies
View Related
Apr 21, 2013
I was recently given a new CorelDRAW X6 update/service pack within the last month. Since then, when I export a Corel image to EPS, CorelDRAW X6 crashes. Be sure and SAVE before you export!
View 7 Replies
View Related
Dec 11, 2011
Well I use Corel draw X5 Service pack 2. Recently I have been having the problem of Corel draw crashing when I export any .cdr to pdf using any settings as long as the pages are more than 2 and the resolution is 300 dpi.
I have tried reinstalling it a couple of times but in vain.
View 4 Replies
View Related
