CorelDRAW X4 :: Export CDR To SVG Not Proportionate
Feb 17, 2013
screenprint.jpg
I have been trying to export numerous files from Corel X4 to an SVG format, individually and using the Batch Export script. These files are setup in Corel as 640x480 px and when I go to export them the page default is 600x600 pix, it will not let me change the page size to 640x480, it remains either 640x640 or 480x480.
In addition to this glitch, when I open the file in Inkscape, the page size is 14400x14400 px and when I change the page size in Inkscape to 640x480 then the drawing is so far off the page to the lower right extent that it is nearly impossible to find.
This is not limited to Inkscape when opening the file, it also behaves the same way in Illustrator and several other software packages. It is also not my Corel install, as I have Corel on several other computers. It works just fine on one of them, the other three it is just like described above.
I have tried creating new files, rebooting and nothing changes. The odd thing is that it has worked fine on these computers previously. It makes me think that once the batch script is run, it corrupts something?
View 8 Replies
ADVERTISEMENT
May 17, 2013
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
View 3 Replies
View Related
Oct 22, 2013
It goes like this: I have poster created in Corel X6 home & student version. I try to Export it to JPG or GIF but the Corel just Shuts down. Before it shuts down there appears a statement about their failure and question if I want save it and close program and two other options.
View 2 Replies
View Related
Jun 15, 2012
As I am corelian, i am using corel for emailer also, its great but sometimes only facing problem while exporting object for web i.e. suppose I require 650px of jpg or png image size and i put the same value but output image was not the same size it might be 647px or 648px and sometimes it give me thin white line either side of the image (left or right). it created problem in emailer's layout so i have to export it in larger size e.g 670px and then open into photoshop and resize into 650px.
View 2 Replies
View Related
Nov 12, 2012
We just upgraded from Corel X4 to X6. When exporting a file into tiff in X6 , some images are creating extra lines that run into space. The images are made form cgm files, have not the best quality and relative old but in X4 I never had a problem with that.2678.test_c_drw_000_X4.tif4722.test_c_drw_000_x6.tif
Any new setting that needs to be on or off ?
I noticed that in X4 there is an option to apply ICC profile which I can't find in X6.Does this influence this?
View 1 Replies
View Related
Mar 8, 2013
I am trying to export my corel draw x6 file as a dxf or dwg file to import into sketchup. When I do this it drastically alters the lines in my drawing. It did not do this in x4. I know that it changes my curves into a bunch of line segments and I am okay with that. What I have a problem with is that it is changing my straight lines into line segments that are not straight. Any way to successfully import my corel drawing into sketchup?
View 2 Replies
View Related
Mar 10, 2010
Im sure there must be something im missing here with the PNG export settings. I like the way the new export window appears but I cant figure out how to export from Draw to a PNG with a transparent matte of a color picked color.
How I did it in X4 was to chose to export to PNG, and when the window appeared to select a color for the transparent area, a color picker was used. Whatever I do with X5, i cant do it .
View 14 Replies
View Related
Apr 9, 2012
Some days ago, I installed the x6 version. Now I find that, when export to Tif using x6 with the same settings and the same origin file, the file size is almose 3 more times then when using x5.
More Details:
I always use lZW compression, than the color mode I select paletted, and the final, choose document palette.
View 6 Replies
View Related
Oct 5, 2012
leopard red platter jpg.jpg
Im trying to export my image to jpg in coreldraw x5. When Im on the original screen in the program it doesnt show the lines but it does when I try to export in jpg format. Its only the pattern fill that shows the white lines and it shows in every pattern fill that I try to export.
View 6 Replies
View Related
Jul 8, 2011
we use CorelDraw X5 to make cartographies on building plans with several layers of - mostly - polylines drawings (one layer = one building material type or one weathering form type) and we must give them back to architects who use AutoCAD.
We already tried several times to export the .cdr to .dxf or .dwg files, but till now, the architect seems to be able to open the files, but our cartographie is quite illegible: only some parts of the layers are visible and it seems that some layers are not visible at all...
View 7 Replies
View Related
Mar 30, 2011
how can we keep a custom pantone name that we gave in corel when its exported at pdf..
Corel is changing the name and we cannot see the actual name that we gave at the final pdf...
View 5 Replies
View Related
Nov 22, 2012
I am exporting some graphics to PNG from Corel draw, but the colours are coming out ridiculous looking. The nice, wintry green, is flourescent green. I am using the RGB colour palette and exporting to RGB 24bit - is that correct?
View 6 Replies
View Related
Mar 8, 2013
Both printing and exporting is disabled, but only with one file, others are fine. How to fix it? No, it's not the trial version.
View 5 Replies
View Related
Jul 18, 2013
Whenever I try to export a graphic as a jpeg the program crashes. I tried clicking off the "enable background tasks" option that seemed to fis eps exports.
View 9 Replies
View Related
Nov 10, 2012
If you use win 7 64 bit and corel x4, try to export to png or jpg 330 x 250 pixels. Does it works fine or it exports to 330 x 249 like in my case.
View 1 Replies
View Related
Apr 21, 2013
I was recently given a new CorelDRAW X6 update/service pack within the last month. Since then, when I export a Corel image to EPS, CorelDRAW X6 crashes. Be sure and SAVE before you export!
View 7 Replies
View Related
Dec 11, 2011
Well I use Corel draw X5 Service pack 2. Recently I have been having the problem of Corel draw crashing when I export any .cdr to pdf using any settings as long as the pages are more than 2 and the resolution is 300 dpi.
I have tried reinstalling it a couple of times but in vain.
View 4 Replies
View Related
Nov 30, 2013
I was asked to make a big banner 525cm x 250cm. After completing it in few minutes I tried publishing it to pdf but i constantly get an empty white pdf file.After few tests i figured out that I can correctly publish any file that is smaller than 500cm but anything above gives me an empty pdf.
Have you faced any similar problems?
View 7 Replies
View Related
Mar 14, 2011
To send to the printer it needs to be a PDF file. I have two separate issues:
1. I have an image faded into the background with text over it. When I export to PDF, this image disappears and does not show up. What settings do I have to change to prevent this?
2. The 2nd question is about size. The size of my document is 5.5 x 9. However, when I export it to a PDF it is a much larger size. I am not talking about the size percentage. When it is at 100% (I would think this should be the actual size) and I print, it is printing as 8.5 x 11. The printing options are set to print to actual size.
View 4 Replies
View Related
Apr 17, 2012
I am exporting a coreldraw image to .png for a logo but it is fuzzy. I change the palette and tried various setting but it is still fuzzy? How can i get a clean image?
View 6 Replies
View Related
Mar 18, 2011
SanM_ExportToJPG.zip
A few days ago I remembered about my old macro Export To JPG, and I updated this one for CorelDRAW X5. This is not perfect macro.
Macros and tools for CorelDRAW @cdrpro_ru
View 4 Replies
View Related
Dec 7, 2012
Resolve the problem with export to PLT format? Since one day my X5 starts export objects larger than they are to PLT. Ex. text which should be 200mm wide is in PLT 250mm.
View 4 Replies
View Related
Apr 9, 2013
We are an Offset Print company and our Designers and Pre Press Operators have used CorelDraw for some years now. Their workstations run Windows XP and Windows 7 and all use CorelDraw x6.
Our Problem is this: When we create a pdf in CorelDraw x6 via File - Export... the resulting pdf is created with no pdf Title name. This Title name can be viewed when the pdf is opened in Acrobat and going to File - Properties.
Using CorelDraw x5, which we have just upgraded from, creating a pdf via File - Export... resulted in a pdf that had a Title that was the same as the File name of the Corel document that it was exported from.
Because in the held ques of our DPX Image setter any pdf without a Title name is simply displayed as "Untitled". It then takes some guesswork and previewing of these files in the held que to determine which job is which. This also becomes a bigger problem if we wish to re-burn a set of plates at a later date as then it is a time consuming task to preview files from our Image setter's printed que.
So our question is: Is there a setting we can change in CorelDraw x6 that once set will then cause all pdfs (exported from CorelDraw x6) to automatically have a Title ?
(There was no such setting in CorelDraw x5 - the Title was simply added to exported pdfs automatically).
View 6 Replies
View Related
Dec 16, 2011
We are doing Bars charts in Microsoft Excel and copy past (speical) them in Corel Draw to have an vector form.
When we export them as CMYK in .EPS format.
In priting we are getting RGB colour (the colours point towards lines in chart)
But the question is that when we group /select all the objects in coreldraw file and export them in CMYK in .eps format, why does every object does not convert into CMYK.
View 3 Replies
View Related
Sep 16, 2013
I am designing vector art that is much larger than the default 8.5 x 11. I change the page size to accommodate the art I am creating. When I export the art to EPS, all I get is this 2MB file that contains an image that is 8.5 x 11. What can I do about this?
View 6 Replies
View Related
Mar 14, 2012
Having trouble with export from Xara 6 to Corel Draw. I have used CMX before and it worked. Now I try it and I get an error message that says there is an internal error, and it will not export. I tried png. and it works but when opened in Corel it is not a workable vector.
View 9 Replies
View Related
Jun 10, 2011
how to export png from corel?
View 3 Replies
View Related
Aug 4, 2012
i have a file i traced (into vector format) from an image and all looks great in enhanced view but it looks bad in normal view how do i save or export the enhanced image instead of the normal image?
im trying to export to my cutstudio program, when i export to cut studio with the plugin it shows the normal view version not the enhanced view
also is there a plugin or some way i can export to/from paint shop pro (like there is for cut studio)
View 7 Replies
View Related
May 18, 2012
As long as a cmm is set up it is not possible to me to measure the same color value on screen (with an external color picker) that I entered in Corel's color definitions. This only works, when I turn off any cmm in Draw.
Plus it is not possilbe to export a pdf in which I can measue the RGB values that I defined in Draw. The closest I get is without a cmm (see above) but I still get readings that are off by 1 in most cases (I don't figure why rounding issues should be acceptable here).
The only export that works for me is to export for "Office" .. only then all values are exactly how I had defined them.
View 1 Replies
View Related
Jul 27, 2012
Need to export all my .cdr in several hundred folders, out to .jpg with matching file name and -1 -2 for page listings, but I want to keep the same folder structure but put it in a folder Next my CDR folder.
Example
Artwork CDR/ folder/folder/folder etc
Artwork JPG/ folder/folder/folder etc
I tried the file convert macro, but Have to run this per folder and would be time consuming... plus it is failing after four files.
View 4 Replies
View Related
Jun 1, 2012
I've got some PDF's that I'd like to convert to a DXF or DWG. Is it as simple as Import>>>PDF then Export>>>DXF? or are there other hoops I'd need to jump through.
View 3 Replies
View Related
