i have a file i traced (into vector format) from an image and all looks great in enhanced view but it looks bad in normal view how do i save or export the enhanced image instead of the normal image?
im trying to export to my cutstudio program, when i export to cut studio with the plugin it shows the normal view version not the enhanced view
also is there a plugin or some way i can export to/from paint shop pro (like there is for cut studio)
When I am in Enhanced view mode Coreldraw turns all whites into a pale yellow color. I can not figure out how to reset it to pure white. It's double strange that it I zoom in quite close to an object it reverts back to white until I zoom out again! It only occurs in enhanced view not the other modes.
Is there any way to automatically export only the pictures I've enhanced during the develop phase? I was resolved to Ctrl-Click on the ones at the bottom filmstrip that I could 'see' that I had edited (about 15 out of a hundred) and then export to a subdirectory. Maybe someway to filter that bottom filmstrip to only the pictures I've edited/enhanced?
I'm trying to output B&W art for offset and can't get a .tif, .pdf, or .eps to look as good as the Draw version. Even ran the .tif up to 2400 resolution, making for a 160+MB file; not bad, but still rough by comparison.
Then I turned View/Enhanced to View/Normal: they look the same now. Is Draw, when View is set to Enhanced, smoothing out my artwork in a way that can never be reproduced in real life? Would explain why my printer is always letting me down.
What's the easiest way to determine if an Open Type font is enhanced with ligatures, optional caps, etc? I have not found any means other than to open each one individually and try to implement the features.
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
The new Enhanced Menus feature is ace and a welcome thing BUT can you add Vray lights and cameras to it? Its oh-so-close to replacing the normal command panel and toolbar. Add Vray
ANNOYED BECAUSE ALL MY OLD AREA SETTINGS, SIGNATURE, FORUM POSTS etc ARE ALL *GONE*. AND NOW I HAVE DUMB LONG USERNAME INSTEAD OF MY OLD ONE.
Just upgraded (not sure it was truely an upgrade) to LT 2013. When double-clicking an attribute in LT 2009 a nice dialog box popped up that could be tabbed through to each attribute. In 2013 the Enhanced Attribute Dialog box will not allow tabbing, you have to physically click on each attribute item then go to another spot in the box and click again to make the change.
I am extremely new to Autocad and working with the Enhanced Attribute Editor. I have a drawing frame block with existing notes that I can alter with the enhanced attribute editor. I want to add some new notes to it but am having some problems. I have added an attribute Definition (ATTDEF) but am not sure how to go from there.
I have a simple GIF image in Photoshop 6 that is a line drawing of New York State. The background is transparent, the ouline is black, and the interior is white. I want to use this image in another application (FormDocs), but there is no way I can insert it with the transparent background.
FormDoc says that transparency is only supported if the image is Enhanced Metafile and if PhotoShop can save it as an Enhanced Metafile with transparent sections, FormDocs can properly display it. This file format is not available in Photoshop's Save As drop-down and no Copy - Paste Special combination works. I've tried everything I can think of, but I can't get this image into FormDocs with a transparent background.
I've been through the Help files, all the menus, etc. Although I'm relatively experienced with PC applications, Photoshop is a very complex application for a person who does not use it on a daily basis and who is not graphics-savvy.
I have a block with attributes. When I use the enhanced attribute editor, under text options, the height is grayed out, not allowing me to change the height. How do I fix this?
After installing 3ds Max 2014 I decided to check out the new enhanced menu. It worked very will for a few days but for some reason now every icon in the menu is very low quality or just a star. I've tried doing a complete re install but it didn't seem to work.
I've attached a screenshot to illustrate what I'm talking about.
Is there any way to automatically export only the pictures I've enhanced during the develop phase? I was resolved to Ctrl-Click on the ones at the bottom filmstrip that I could 'see' that I had edited (about 15 out of a hundred) and then export to a subdirectory. Maybe someway to filter that bottom filmstrip to only the pictures I've edited/enhanced?
By default a double click on a attribute opens the "enhanced" function. I don't want this, I want the "normal" attribute editor, is there a variable to change ? Or another way ?
I having one DWG with in 50 layouts. In that, if i going to edit or change the date, description, and etc, means it will take too much time to update in all layouts (50nos.)
If possible to edit all layout with in one time?. One more thing, one type of title block used to all layouts and title block was with enhanced attribute text.
I'd like to save a position representation to an image, but if I do this, it will save the master representation. So, how can I export a selected view?
Software: Inventor Series 2011 SP1 x64 OS: Vista Business x64 CPU: E6400 RAM: 2*2Gb GeIL VGA: Quadro FX 550
When in the attribute editor, after you edit an attribute then click "select blocks", to choose a new block to edit, an alert appears telling you that an attribute in the block has changes and asks if you want to save these changes. I ALWAYS want to save these changes...
Therefore, my question is, is there a way to turn that alert off or suppress it?
Is there any Event when The enhanced properties editor dialogue show out? I want to do something when the dialogue is showing.
I first use the CommandWillStart Event to catch the "EATTEDIT" order ,however,if only covers the condition that users doubleClick the block .when users first input EATTEDIT command then select the block this event was wrong!
I have been making a title box for my drawing layout and have been using attributes. all my attributes open in the 'Enhanced Attributes Editor'. But for my Scale option, i was wondering if there was any way of creating a drop down list in the enhanced attributes editor instead of typing the value in each time?
I am looking for a way to export the structured BOMview from Inventor to either Excel or Word. That’s all good and I can do that but I struggle to find a way to include “All Levels” of the structured BOM view. At the moment I use a “For Each item in BOMview” loop to cycle through the BOMView items.
I have also set the StructuredViewFirstLevelOnly property to False. The For Each loop does not pick up any items inside sub-assemblies.
What would be a nice way to drill down and get an item output like this:
When I export my slideshow in LR5, then view it in Quicktime, it looks washed out. Even the opening screen which is pure black in Lightroom, looks washed out. I've never had this happen before.
I use civil 2012, and have a drawing with over 400 attribute blocks that are all set to be "green" in the enhanced attribute editor, properties tab. I would like for all of the attributes to be set to "by layer". However, I find that the it only allows me to change one block at a time. As said earllier, I have over 400 blocks.
I was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
I have been having this issue with autocad generated color PDF printouts having "fuzzy" fonts and some other black objects. What I have traced it to is that the PDF created by the stock Autodesk PDF ePlot renderer/driver is printing those fonts (and other things like lines with global width) in rich or enhanced black. 75,68,67,90 CMYK to be precise. When this is done without some sort of 100% K border (and sometimes even with) it leads to a blurring of the edges because the registration is never perfect. There is often even some ghosting due to the sheer amount of toner.
Some printer drivers have a way of forcing or selecting this "Enhanced Black" but I see nothing in the settings. I wonder if this can be externalized. It seems that at least fonts should almost never have this turned on.
a powerpoint presentation, for a software package that I have designed, and written, for use with AutoDesk Inventor.Could I ask you if you could spare just 2 minutes of your time to look at the presentation, so that I can gauge your impressions of the software, and the power point presentation itself.
The powerpoint presentation will give you a brief description of the software's capabilities