How to draw a line in Corel Draw which would have width=7 on its beginning and that would gradually become thinner, until it finishes with width = 1.
For example:
This line, just without the heart:
[URL]
Or this one (the one below):
[URL]
How can I do this with curvy or with straight line?
Is it possible to get the line thickness down of the calligraphic and/or pressure tools in artistic media? The minimum thickness seems to be .762mm (2.16 pt or 0.03"). I use a Wacom Intuos 3.
View 4 Replies View RelatedAs an exercise I'm trying to recreate the leaf image in the X5 guidebook ( pages 127 & 128). No problems until I came to drawing the yellow "veins" on the face of the leaf. I need to create lines that start off thin, get thicker in the middle and go back to thin at the other end.
I managed to create the effect by drawing a closed , filled object, and then playing around using the shape tool to achieve the desired result..
Is there a better, quicker way to do this. I tried doing it using the artistic tools but no luck there.
I have an artist who draws for me and he sent a profile sheet of some different heads to use on the body's already created.
PROBLEM:
When I import to Toonboom animation the image files Are in large scale and when shrunk down the match the body the heads lines are thinner than the body's line thickness.
Question:
Is there a way to import the image or scale it down prior to importing so as to keep the same line thickness?
I want to know if there is a way I can vary the thickness of a paintbrush line in Photoshop without having a tablet. I've done it before in Freehand by toggling the number keys, and I'm hoping that there is a similar way to do it in Adobe programs.
Anybody have any clue or should I just go ahead and invest in a tablet? I've got a lot of control with a mouse so accuracy isn't too much of an issue.
Mean I finished my sketching and see some part of the pic that strokes need to be thinner or thicker. I saw this article some where on the net long ago but can't find it
View 6 Replies View RelatedSo... I have a Bamboo Splash pen tablet and I have GIMP 2.8.4 on a Windows XP computer.
I was messing with the dynamics as much as possible, but I encountered an issue: it only adjusts opacity with pressure, not line thickness
I used Photoshop before and it allowed me to keep the opacity at 100% and change the thickness of the line with pressure (the way I prefer it)
How is it possible to view the line thickness that you have set at the drawing surface? before you polot. I mean drawing and working with the actual line thickness that you set for the layer? and i do not mean using pline
View 4 Replies View RelatedIn model space all of my linetypes (for all me various details)look correct, however after creating multiple Viewports within a new layout, and scaling them appropriately the line thickness of each viewport look very thick. To the point where dimensions and notes are unreadable. But when I plot, everything is ok. It appears as though everything has been drawn with a very thick polyline. What causes this?
View 3 Replies View Relatedhow to change the thickness of leader lines. I'm editing a drawing done by someone else and I need to make the leader lines thicker. I tried changing the layer thickness and making sure the settings were such that the leader line thickness would be determined by the layer. I also tried channging the leader line thickness in properties and/or leader styles, but no luck there either.
View 6 Replies View RelatedWhat's the best way to measure something in GIMP? For example, suppose I want to determine the thickness of a line within an image so that I can extend it? The scales along the top and left sides only give a fairly crude approximation but I want to know exactly how many pixels thick the line is.
How do I do that in GIMP?
I've been working on a floor plan after which I wanted to mark the border of a particular area. So, I drew a polyline surrounding the space and used a 2 (inch?) lineweight. It appeared on my screen to be very thick so that was great. The problem is I can't seem to draw any other polyline without seeing this big thick line on my screen - even if the linewieght is set to something thinner. It still "shows up" huge. It's like my viewing setting is frozen to only show polylines real big.
View 2 Replies View RelatedI have an issue with plotting line thickness, when I use the company setup using a d-size B&W.pc3 and mono chrome.ctb files, i can't seem to get the plotter to show line thickness. But using the same setup with a customer border, I can get the line thickness.
Also I not sure if this makes a difference, but the company plots from model space and where most of our customers use paper space.
DIST temporary line with thickness - bug
To replicate:
Open any drawing > go to Layout.
Turn ON Lineweight.
Enter DIST command. Pick first point. Do not pick second point.
Instead do wheel mouse zoom in. => the temporary line has thickness. It should not.
What setting controls the line thickness attached to the arrows in the attached Detail View?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I'd like to change the line thickness of these structural columns, but changing the view graphics doesn't override.
View 3 Replies View RelatedHow to choose the thickness change line drawn?
or
Select the objects to be drawn?
I know this option makes all lines the same thickness when printing, but where can i modify this "global" thickness.
View 7 Replies View RelatedI need to form a line/lines with thickness on the surface of a sphere as seen on the attached image. I also want to apply transforms to the line while keeping it stay on the surface. How can I do that?
View 9 Replies View RelatedHow I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
when i have a detail view on the layout, the text and the border line have the same line thickness. I want that the text will be bold (0.5mm thick) and the border line will be thicker (0.13mm thick).
i have tried to change the layer's line thickness, but it effected both the text and the line border. how can i separate between them?
I have a schematic or drawing that I just need to increase the line thickness on. It is just all black lines and letters that are currently only like 1 pixel thick. When printed it is hard to see. Is there a good filter or method that any of you know of that will allow me to increase the thickness of these lines?
View 3 Replies View RelatedWhat line weight changes the thickness of the border around a Detail View in 2012?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
may i knw hw to reduce an thickness of a particular text to a line.. i have attached an screenshot on hw it is.. and wt output i need. #mce_temp_url#
View 14 Replies View Relatedarrows.jpg
I need to make lines of different thicknesses, with arrowheads. However, when I increase the line width the arrowhead should not be proportional. It need to stay a bit smaller.
Example: if the line is expanded to "Thick 3", I need the arrow keeps equivalent to "Thick 2" - for aesthetic reasons.I can do edit as I show in the bottom of the sample picture.
However, I need to build HUNDREDS of arrows of different sizes.Is there any way (Macro function?) permitting I enlarge/reduce line thickness and allowing me to edit the arrow without changing the line thickness?
Important Note: Is not enough I edit some arrows and save them as a kind of Template, then import them to work. The arrows have different ways in thickness and may be straight, curved, winding, etc.. Hence the need to edit the edges easily.
It would be nice to have vba scale the thickness of the the eraser tool based on the current zoom setting. What i'm after is every time i click on the eraser tool, it will autosize to 2% of the current window size. So if im zoomed in really far and the current window has a wdith of 1 inch, the diamter of the eraser would change to 0.02 of af inch. Where as if I was zoomed out far and the current window had a width of 24 inches, the eraser thickness would default to 0.5 inches or something like that. The idea would be for the diameter of the erser to always be the same thicknes % of window size no matter what zoom level im at.
I can figure out how to get the current zoom level, and I know how to make this script run by altering the customization and setting this script's hot key to X. but im not sure if there is a function to change the thickness of the eraser. it doesnt seem to record when I attempt to record a macro.
Draw specific, Is there a vector tool that will accept input and change thickness with pressure from the pen?
Can I use the eraser in Draw? Any other cool things I can do with it now? I'm still getting used to it, but it seems neat.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
When I go to change the thickness of an artistic media stroke, it jumps up from .045 to .095 or down to 0.3, or similar sorts of jumps in either direction, when I want to make finer adjustments than that. I'm surprised that a program that has so many options and precise ways of doing things wouldn't allow that. Is there no way to accomplish that?
View 6 Replies View Relatedhow to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
I would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies View RelatedI am working with vector art that has lines that either look like they were cut off and not finished out or extend to the edge of the page so they are straight when they should actually be curved.
Is there any way to take a straight line or part of an image and curve it with ease or will I have to redraw or alter each line?