So... I have a Bamboo Splash pen tablet and I have GIMP 2.8.4 on a Windows XP computer.
I was messing with the dynamics as much as possible, but I encountered an issue: it only adjusts opacity with pressure, not line thickness
I used Photoshop before and it allowed me to keep the opacity at 100% and change the thickness of the line with pressure (the way I prefer it)
What's the best way to measure something in GIMP? For example, suppose I want to determine the thickness of a line within an image so that I can extend it? The scales along the top and left sides only give a fairly crude approximation but I want to know exactly how many pixels thick the line is.
How do I do that in GIMP?
How to draw a line in Corel Draw which would have width=7 on its beginning and that would gradually become thinner, until it finishes with width = 1.
For example:
This line, just without the heart:
[URL]
Or this one (the one below):
[URL]
How can I do this with curvy or with straight line?
I have an artist who draws for me and he sent a profile sheet of some different heads to use on the body's already created.
PROBLEM:
When I import to Toonboom animation the image files Are in large scale and when shrunk down the match the body the heads lines are thinner than the body's line thickness.
Question:
Is there a way to import the image or scale it down prior to importing so as to keep the same line thickness?
I want to know if there is a way I can vary the thickness of a paintbrush line in Photoshop without having a tablet. I've done it before in Freehand by toggling the number keys, and I'm hoping that there is a similar way to do it in Adobe programs.
Anybody have any clue or should I just go ahead and invest in a tablet? I've got a lot of control with a mouse so accuracy isn't too much of an issue.
Mean I finished my sketching and see some part of the pic that strokes need to be thinner or thicker. I saw this article some where on the net long ago but can't find it
View 6 Replies View RelatedIs it possible to get the line thickness down of the calligraphic and/or pressure tools in artistic media? The minimum thickness seems to be .762mm (2.16 pt or 0.03"). I use a Wacom Intuos 3.
View 4 Replies View RelatedHow is it possible to view the line thickness that you have set at the drawing surface? before you polot. I mean drawing and working with the actual line thickness that you set for the layer? and i do not mean using pline
View 4 Replies View RelatedIn model space all of my linetypes (for all me various details)look correct, however after creating multiple Viewports within a new layout, and scaling them appropriately the line thickness of each viewport look very thick. To the point where dimensions and notes are unreadable. But when I plot, everything is ok. It appears as though everything has been drawn with a very thick polyline. What causes this?
View 3 Replies View Relatedhow to change the thickness of leader lines. I'm editing a drawing done by someone else and I need to make the leader lines thicker. I tried changing the layer thickness and making sure the settings were such that the leader line thickness would be determined by the layer. I also tried channging the leader line thickness in properties and/or leader styles, but no luck there either.
View 6 Replies View RelatedI've been working on a floor plan after which I wanted to mark the border of a particular area. So, I drew a polyline surrounding the space and used a 2 (inch?) lineweight. It appeared on my screen to be very thick so that was great. The problem is I can't seem to draw any other polyline without seeing this big thick line on my screen - even if the linewieght is set to something thinner. It still "shows up" huge. It's like my viewing setting is frozen to only show polylines real big.
View 2 Replies View RelatedI have an issue with plotting line thickness, when I use the company setup using a d-size B&W.pc3 and mono chrome.ctb files, i can't seem to get the plotter to show line thickness. But using the same setup with a customer border, I can get the line thickness.
Also I not sure if this makes a difference, but the company plots from model space and where most of our customers use paper space.
DIST temporary line with thickness - bug
To replicate:
Open any drawing > go to Layout.
Turn ON Lineweight.
Enter DIST command. Pick first point. Do not pick second point.
Instead do wheel mouse zoom in. => the temporary line has thickness. It should not.
What setting controls the line thickness attached to the arrows in the attached Detail View?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I'd like to change the line thickness of these structural columns, but changing the view graphics doesn't override.
View 3 Replies View RelatedHow to choose the thickness change line drawn?
or
Select the objects to be drawn?
As an exercise I'm trying to recreate the leaf image in the X5 guidebook ( pages 127 & 128). No problems until I came to drawing the yellow "veins" on the face of the leaf. I need to create lines that start off thin, get thicker in the middle and go back to thin at the other end.
I managed to create the effect by drawing a closed , filled object, and then playing around using the shape tool to achieve the desired result..
Is there a better, quicker way to do this. I tried doing it using the artistic tools but no luck there.
I know this option makes all lines the same thickness when printing, but where can i modify this "global" thickness.
View 7 Replies View RelatedI need to form a line/lines with thickness on the surface of a sphere as seen on the attached image. I also want to apply transforms to the line while keeping it stay on the surface. How can I do that?
View 9 Replies View RelatedHow I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
when i have a detail view on the layout, the text and the border line have the same line thickness. I want that the text will be bold (0.5mm thick) and the border line will be thicker (0.13mm thick).
i have tried to change the layer's line thickness, but it effected both the text and the line border. how can i separate between them?
I have a schematic or drawing that I just need to increase the line thickness on. It is just all black lines and letters that are currently only like 1 pixel thick. When printed it is hard to see. Is there a good filter or method that any of you know of that will allow me to increase the thickness of these lines?
View 3 Replies View RelatedI'm making a graphic work (it's for my kid's yearbook), and I'm struggling to achieve an effect.
Here's the deal:
The attached file is an image in which I try to represent the text and graphics as if they were painted in a wood plank. I'm pleased with the effect on the surface of the plank, but I wanted to give the plank some thickness, to make it seem more like a 3d plank. That thickness effect is what has been tormenting me.
Attached File(s) Name.plank.png (499.54K)
What line weight changes the thickness of the border around a Detail View in 2012?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I found out that you can't change line color in the line nova because a fix to prevent white on white or something like that. Is there another way to change the line color.
View 6 Replies View RelatedI've just recently caught up to 2.8 (From 2.4 something or other believe it or not ) and amongst a couple of things I have to say I don't like is the fact that previously when setting a path, if I wanted it to be either perfectly horizontal or vertical I could see by the steps in the path preview line whether it was or not.
With the new version, initially at least, that's no longer the case. As I tend to work with straight lines a lot of the time it's proving to be a bit of a pain. Is there any way to set the path preview line to show the steps again to indicate a straight line.
I'm using GIMP 2.6.11. When I use the line tool and left click + shift to snap a line from point to point, there's no preview line that shows exactly where the line is going to be drawn. In former version(s) of GIMP, I could clearly see where the line was going to be placed because of this feature. I miss it because when doing technical drawings precision and exact angles are needed. Is this feature not included with GIMP 2.6.11? How I can get this tool to work like it used to?
View 2 Replies View RelatedI'm creating a simple map for a non-profit event. I'd like to draw a white line (road) with a black outline to provide definition - it's simple a line within a line. Additionally, I'd like to save the setup for reuse as a default setting of some type to easily recall.
View 2 Replies View RelatedI am new to Corel Draw, and I'm using a shiny new copy of X5. It seems like this should be ultra simple, and I don't know what I could possibly be doing wrong, but I have text in a Paragraph box and want to simply adjust the line spacing (leading), but no matter what mode I'm in the control does nothing.
I made sure that I wasn't missing a space or a return or something by using select all, I have used all three modes, which will change the spacing as I select a new mode, but changing the value in the spacing box does nothing. I can make it 2 points 100 points, 50%, everything I have tried does nothing at all.
Why is it when I increase the lineweight, on the current layer, to a thicker lineweight from the default .25mm, it remains the same thickness/weight? I can change everything else, style, color, but not the weight. I need it to be a thick line, instead of the normal thin line.
View 3 Replies View RelatedI have previously sketched lines and tangent arcs so I know how it is supposed to work but on this new install of Inventor I am only able to draw line segments. When I try to drag an arc all I get is a line from the previous end point and the new end point. I think it is related to the fact that coincident restraints are not being made automatically as I draw but I have not been able to find where to turn that on.
Version 2013
AMD Phenom 2 955 quad core
4gb ram
Radeon 5700 graphics