AutoCAD Inventor :: Modify Object Line Weights Thickness

Dec 15, 2011

I know this option makes all lines the same thickness when printing, but where can i modify this "global" thickness.

View 7 Replies


ADVERTISEMENT

AutoCad 3D :: Plotting 3D Object - Getting Different Line Weights

Dec 13, 2013

So I'm doing an installation drawing for a piece of equipment and I'm having an issue. Let's say I model a cube, put it in a viewport at a isometric view in "hidden" visual style. Several of the edges are plotting significantly darker than other edges on the cube.

View 1 Replies View Related

AutoCAD Inventor :: Update Line Weights

May 10, 2013

I just had Inventor 2010 reinstalled on a new workstation with Windows 7. On any new drawings my line weights are fine.

On any drawings created before the new install, the line weights are all the wrong thicknesses now when I open them on my machine. They used to be fine and to our company standard.

How do I get it to where my line weights are correct on all idw drawings.

View 3 Replies View Related

AutoCAD Inventor :: Save PDF With No Line Weights

Jun 20, 2012

My current code consists of a simple line to save my .idw that is produced as a .PDF. 

_invApp.ActiveDocument.SaveAs(CurrentDirectory &"Submittal_Sheet_0" & drawing_count & ".pdf", True)

Within Inventor, if you select Export --> PDF, you can select an option that disregards the lineweights set in the drawing. How to set it up in VB to do that?  

View 9 Replies View Related

AutoCAD Inventor :: IDW Default Line Weights?

Nov 24, 2013

how to set the line weights in my idw to be thin? They seem to have changed to thick lines and it's a task to keep changing them through the layers etc

View 3 Replies View Related

AutoCAD Inventor :: Perimeter Line Weights

Aug 13, 2013

I'm doing a parts manual and would like to have a heavier perimeter line weight around each of my parts or sub assemblies. I know I can manually change the line weights however some lines that make up part of the perimeter also run into my part or assembly so this doesn't really work. Is there a way to get inventor to do it automatically? 

I'm running inventor 2012, and generating a .dwg file from an .ipn.

View 9 Replies View Related

AutoCAD Inventor :: Line Weights In IDW Drawings

Jun 21, 2012

What controls the line weight in idw drawings in Inventor 13?  If I zoom in on a section the line gets wider as I zoom in until it looks like a pdf drawing.  I don't have this issue with Inventor 12.

View 1 Replies View Related

AutoCAD Inventor :: IDW Printed Line Weights - Best Fit Will Not Work

Jul 3, 2012

Currently I cannot print line weights with the "best fit" scale option selected.

Scale options of:

model 1:1 (w/o tiling) ,custom (above .7 scale), & current window all seem to scale the lineweight correctly. But the output is not limited to the sheet edges

IDW line weights display correctly within Inventor (2013) drawing environment

The behavior is the same across all printers on my system, including PDF & from the "export to PDF" option.

It seems any scale value smaller than .7 will zap the line weights from the preview as well as the hardcopy

View 6 Replies View Related

AutoCAD Inventor :: Line Weights To Thick In Small Detail

Jul 26, 2013

I have placed my assembly onto the idw and the line weight is set up correct for the majority of the drawing, but the small details, line less than 1mm together still carry the same line weight as the rest of the drawing. They are coming out far too thick as one big fat line.

Is there a way (Automatically, not RHM change layer) to select lines that are close together to move to a different layer that has a different line weight? I dont really want to go around selecting every line close together and changing the layer or weight do I?

View 6 Replies View Related

AutoCAD Inventor :: What Setting Controls The Line Thickness

Dec 2, 2011

What setting controls the line thickness attached to the arrows in the attached Detail View?

Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot

View 3 Replies View Related

AutoCAD Inventor :: What Line Weight Changes Thickness Of Border Around Detail View In 2012

Nov 18, 2011

What line weight changes the thickness of the border around a Detail View in 2012?

Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot

View 2 Replies View Related

AutoCAD Inventor :: ILogic Access Hatch Object And Modify Color?

Jul 15, 2013

How do I get at the hatch objects within a drawing using iLogic?

I would like to be able to customize hatch color based on various part properties.

ie: 

Purchased part = Green Hatch
Refrence = Light Grey
and much more

This would be possible if I can get to the hatch object and determin what part it is associated with.

I only see iLogic code that allows you to change visibility of all hatching, and set general hatch angle.

Since I can select a hatch in the drawing and change its color, I assume there is an un-published API object that relates to hatches

View 3 Replies View Related

AutoCAD LT :: When Use Line Weights The End Of The Line Is Rounded Off

Mar 7, 2012

LT2012

When I use line weights, the end of the line is rounded off - can I square off the lines and if so, how?

View 6 Replies View Related

CorelDRAW X3 :: Autocad Line Weights

Jul 25, 2011

this might be a little specialized but i use corel generally to layout architectural drawings. I export them from autocad usually as a .pdf with a variety of different line weights, I notice its not the .pdf but corel tends distort or alter these line weights which typically undoes hours of hard work, is there a way to make these line weights transfer more smoothly to corel?

View 14 Replies View Related

AutoCad :: Line Weights In Pen Table?

May 10, 2011

If you set a line to 0mm will it plot?

View 9 Replies View Related

AutoCad :: Set Line Weights When Plotting?

Jan 10, 2013

How to beef up my line weights when plotting. I am opening and plotting the same files as the previous drafts person but all my line weights are plotting the same. I am thinking that he had something set up in his profile that set the line weights when plotting??

View 8 Replies View Related

AutoCAD Architecture :: Plotting Line Weights

Aug 7, 2013

I have noticed for many years (since ADT 2006...) that the OTB line weights seem to plot the same.  For example, I don't notice much difference (actually none at all) on paper between A-Sect-Thin, A-Sect-Med, A-Sect-Fine, A-Dtl-Fine, etc...  I have always remedied this by adjusting the Global Line weights, which I know is not optimal and I tell everybody else in my firm not to do it.

That being said, some of the more "seasoned" architects who are trying to use ACA are having trouble getting the line weights to print as they would have hand drawn them  years ago.  It has inspired me to take another stab at understanding this issue and trying to determine how it is intended to be used, and what I am doing wrong.

I have gotten the office to use the OTB - AIA LWT By Object.ctb, which I would assume coincides with the OTB AEC styles / objects.  Can some one explain this to me or tell me where I am going wrong?  I have the "Plot Object Lineweights" checked in the plot dialogue box, and honestly have checked and unchecked the "scale lineweights" box and notice no difference. 

View 5 Replies View Related

AutoCAD 2010 :: Line Weights In XRef

Oct 2, 2012

The line weights in the xref are as they should be - I can change the line weight (plot by layer/color) and it plots correctly;  when I attached this file to another drawing, the line weights do not plot.  I can change the layer color to modify the weight (.ctb file) and the correct line weight appears on the monitor, but when I plot - the line weight looks like a standard default width.

I checked the lwdefault in the xref and three other drawings, and in every drawing it is set to '25'; the lines are lines (not plines), and have a zero elevation.  The units are the same as the other drawings;

I believe it's a setting in the drawing (not the xref) - what setting it might be.

View 1 Replies View Related

AutoCad :: Lost All Line Weights When Plotting

Nov 2, 2011

I am using 2008 and have been using AutoCAD for 25 years, so this is not me! Some months ago when plotting, all my plots started coming out very feint as if all the line weights were very thin - this just happened overnight. I couldn't sort this but I have an older pc using 2005 linked to my main one, and I could plot using this one as normal (I did try installing later versions on the main pc but all plots were the same). Now, the same thing seems to have happened with the older pc but in a different way, again overnight (last week all was well) - colours have altered slightly and line weights are all plotting as default. I haven't installed or uninstalled anything, nothing has changed.

View 9 Replies View Related

AutoCAD Civil 3D :: Keeping Certain Line Weights When Plotting

Mar 25, 2013

I want to "remove line weights" when plotting. But I want to keep my title block wording and a certain text within the drawing dark or "thicker". What would be the greatest approach to this.

View 7 Replies View Related

AutoCAD Civil 3D :: Plotting With Proper Line Weights From DWG To PDF

Feb 23, 2012

I’m a student in a land surveying program using AutoCAD Civil 3D 2012. When I try to plot my DWG to a PDF my line weights are not plotting accordingly to the layers. For instance, Layer 1 is set at 0.7mm line weight, Layer 2 is set at 0.3mm but when it plots to PDF they all look similar. I have double checked the options on the plotting screen and I can get the line weights to plot correctly on different drawings with similar settings. I’m wondering if the issue has something to do with the fact that the particular lines that are not plotting accordingly are parcel segments.

View 9 Replies View Related

AutoCAD 2010 :: Line Weights Of Attached TIF With Drawing

Mar 13, 2012

A customer of ours sent us a drawing that has a TIF file attached to it. Inside the TIF all the objects appear red (we plot with a ctb) but no matter what we do, all the TIFs objects plot with really thick lineweight.

How can we make this print legibly?

View 2 Replies View Related

AutoCad :: Line Weights Are Jagged When Plotting 3D View

Dec 12, 2012

After designing a simple 3d model, I can only get it to print right with 2d wireframe. Unfortunately, I don't want all the lines showing up, just the ones on top. I tried all the views, but only 2d wireframe works. Need lines, not concept or realistic shades.

View 9 Replies View Related

AutoCAD 2013 :: Plotting Line Weights Using Drawing Views

May 1, 2012

I have a 3D model. I'm making drawing view, using "create view" task. Now, when i got my view in layout, I choose "edit view" and set appearance to "hidden lines". Ok. When I plot my drawing, i get all lines with the same line weight - visible and invisible lines are all the same weight. How can I make invisible (hidden) lines to be plotted thinner, while visible lines stay thick? Do Autocad 2013 have this option to make it available to change?

View 3 Replies View Related

AutoCad :: Plot Table Set Up Assigning Different Line Weights To Different Colours

Apr 30, 2011

Ok, so i have a plot table set up asigning different line weights to different colours. I have layers set up pointing to the specific colours.
Eg Layer Exterior Walls - Colour White Colour White -> lineweight .25mm

There are some lines on this layer (and on others) which appear different to the rest when plotted, as though they aren't following the line weight rule.

Link to PDF [URL]....(Only the exterior walls layer is selected but this error is on multiple layers)

View 0 Replies View Related

AutoCad :: After Many Failed Attempts / LINE WEIGHTS Don't Plot / Print

Mar 3, 2011

I set up my line weights in layer properties. When I print in color, the line weights show up. When I print monochrome, the line weights are all the same size. I've messed with the LWT button but that doesn't seem to work either.

View 8 Replies View Related

AutoCAD 2013 :: View The Line Thickness?

May 13, 2013

How is it possible to view the line thickness that you have set at the drawing surface? before you polot. I mean drawing and working  with the actual line thickness that you set for the layer? and i do not mean using pline

View 4 Replies View Related

AutoCAD LT :: Viewport - Displayed Line Thickness

Sep 7, 2006

In model space all of my linetypes (for all me various details)look correct, however after creating multiple Viewports within a new layout, and scaling them appropriately the line thickness of each viewport look very thick. To the point where dimensions and notes are unreadable. But when I plot, everything is ok. It appears as though everything has been drawn with a very thick polyline. What causes this?

View 3 Replies View Related

AutoCad :: How To Change Leader Line Thickness

Jul 6, 2012

how to change the thickness of leader lines. I'm editing a drawing done by someone else and I need to make the leader lines thicker. I tried changing the layer thickness and making sure the settings were such that the leader line thickness would be determined by the layer. I also tried channging the leader line thickness in properties and/or leader styles, but no luck there either.

View 6 Replies View Related

AutoCAD Print / Plot :: Line Weights And Colours Not Change When Plotting2013)

May 23, 2013

i would like to ask about plotting in autocad 2013.  at the page set up i change my line weights and i put also the colour of each layer but the colours don't change when i create it in pdf and print the drawing and also the thcikness of the lines are not changed.  what can i do?

View 9 Replies View Related

AutoCad :: Changing Line Weights / Layout Space To Make Changes Permanent

Jan 7, 2014

I need changing the line weights.I was given an AutoCAD 2009 file that already had the drawing created. In the Model space, the drawing has been created on Layer 0. Some of the other lines have a different layer - but most of it is created on Layer 0.My manager has asked me to simply make some of the lines bold and leave the rest as is.

When I turn on the LWT button at the bottom of my program, the line weight is extremely bold (shows "By Layer" for the line weight). I have gone back to each layer to select a thinner line weight and saved the drawing. However, when I go to print, the line weight defaults back to the “By Layer” line weight.

do I need to be in Layout space to make these changes permanent?

I have then created a new layer (with a new colour) and selected my preferred line weight – and changed the lines that I want to be thicker, to the new layer I created. When I go to print, I went into my printer settings and insured that the new layer I created and colour has the preferred line weight I want. However, when I preview my drawing, it has made all the other layers thicker, and the ones I want thinner.

Should I follow the previous forums and threads using the pline and pline edit?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved