I have a JPEG image that I would like to Raster engrave with my Laser, and then produce a vector cutout after the image has been engraved. Can this be done with a single image, and how is it done?
View 9 RepliesI get a raster image to convert to vector format. Here's a part of this image:
I tried tracing but the image resolution is low and I didn't get acceptable results.
I've also tried tracing the edge with line segments and Bezier curves. But when the lines close a polygon the resulting polygon is not what I expect.
What tools to use to convert it to vectors? I use CorelDraw X3 and PS 5.
If I bring a raster image into Illustrator (CS5.5) and apply an Effect (Angled brush stroke) will the resulting image be a vector or raster?
View 4 Replies View RelatedI have CS5. Is it possible to convert a raster image to vector, and if so how?
View 2 Replies View RelatedDoes Paint.net have a tracing tool that can convert a raster image to a Vector one?
Something like Adobe's StreamLine or now LiveTrace which is part of the Creative Suite package?
I use and really like Corel Draw X3 (almost 3 years) and will keep that version on one P4 computer that runs win xp pro 32 bit.
X3 has been a great version that never crashes but it is getting slow as I increase the number of objects and symbols in my files. I have a new comp with win 7 pro 64 bit running CDraw X6 and the latest epilog 64 bit driver for my mini 24. I have been using the new X6 for 3 days .
In X3 a hairline or .001 is a vector cut. A line width of .005 and above are raster lines and they work well in my Epilog mini 24. I am using a 1.5" diam lens. In X6 a .005 line will not raster but only vectors. If I change it to .006 it becomes a raster line and will engrave OK.
The big Question:
Is there a way to make .005 raster as it did in X3? I have hundreds of files that are all .005 line width. I don't mind changing them but would rather not.
Could this change be because of the latest Epilog 64 bit driver that I am using with win 7 pro? Almost all my files have oddles of very fine detail (.005) and they would look a bit muddy changing the line width to .006.
cs6 image trace of psd raster file to vector (preset black & white) comes out just GREAT. but i need all that cs6 output - all black must be white. all output white must be black.
View 2 Replies View RelatedI was working in Illustrator CS6 I had made a a bunch of vectors for a background and grouped them. I applied a blur to the group and was still editing the vectors within the group since then. After I saved and closed my file at the end of the day and opened it the next day my vector group is now solid. It seems like it is just a raster image? I can't edit it at all. How can I get it back? If I can't change it back I am going to have to start again!
View 4 Replies View RelatedWith CS6 i loved the addition to combine vector layers into 1 new vector layer but when i do this in PS CC and then try to enlarge it it only enlarges the first shape.
Example:
I create 3 squares, vector shapes, i cmd+E the layers to combine them, and then i want to enlarge the new shape..what happens is, only 1 square becomes larger..
I am having trouble doing this in my current software, Serif Drawplus, PSE, Photoplus, (I have Gimp but haven't used it ever yet). And I am considering buying X6 for use in other projects. So, can x6 do this in either Photo Paint with a bitmap, or in X6 with a group of Vectors?
I want to wrap a bottle with a logo. The mesh warps aren't working for me in the above applications, and envelope warping will not work either. Transform-Warp is not present in PSE. I mention that because I see a tutorial for PS using that. How would Corel X6 Suite do this? I am considering buying the software once some questions I have about it are cleared up. I wish Corel would make the manual and tutorial videos public. I'd rather download the trial for actually using it rather than trying to see if some feature is present, or a workaround for a feature a competitor has.
I am also hoping to make in this project, some 10-20 different bottles with the logo on, of different sized bottles and different rotations of the bottles. Plan D is acquainting myself with Blender, but lets hope I don't have to go that far!
I've been using Illustrator since the late 80's but this request just now came up for the first time, twice in one day: the clients each want me to send them layered files (OK-no problem) wherein all the layers, even the raster layers, register as vector layers. Or at least all the layers, regardless of file-type (vector or raster) are contained within an unflattened Illustrator file. One of the clients specifically asked that the Type layer (No problem-all the type is on one layer) be "vector mapped", whatever that means, while all the other layers can be Photoshop layers, if necessary. So how do I hand them an open, unflattened Illustrator file containing both vector art and raster art? Can it be done in Acrobat, as a PDF? I'm working in AI and PS CS5, but I can and will upgrade if I have to.
View 4 Replies View RelatedI have a problem with editing img raster in Corel Draw X3.
I cant open Photo-Paint... If i use the button to editing a raster, opens Windows Paint.This problem started today. Yesterday everything worked normally.
I am trying to recreate this image as a vector. I thought it would be pretty simple but I am having trouble getting a good trace because it is so small.I am using Illustrator CS6.
View 3 Replies View RelatedIs there a way to save and submit a Photoshop file containing both vector and raster art-unflattened- so that it stays vector and raster when the client opens it? The issue is: client wants to be able to zoom in on the whole file and not lose sharpness of the type.
Seems like a reasonable request. So the finished, unflattened file needs to include both types of layers. Someone suggested using Indesign. Could that work? Didn't Deneba Canvas used to work that way?
Still trying to set up revit standards can't come to conclusion regarding plotting vector or raster. My personal (limited) experience raster plotting has been poor quality with vector the plots are cleaner and it seems I have better control of shaded areas.
View 2 Replies View RelatedIs there a way select all the vector objects in a document, or conversely, to select all the raster objects in a document?
View 4 Replies View RelatedI have a friend who does drawings on paper that he wants to get scalable. The high-level path appears to be scan the image and run autotrace in AI.
As I look at online articles, some suggest taking the raster into PS to erase the pencil marks and ink the image. My friend does the inking on the paper before the scan.
I have some experimenting to do with autotrace settings, but I can see right away that some of the lines on the image vary in width in both PS and AI. And, no matter how good his inking is, there is still quite a bit of "noise" along the lines. His inking also leaves quite a bit of variation in line width. What he wants is a constant width.
My question is: if you want a line to be of constant width and you have a scanned image to work with, which tool (PS, AI) and what technique is best to create the result.
One thought is, rather than try to clean up the line in either tool, the better approach might be to draw a new line using the scanned image as a guide. My concern is that the line won't be smooth if done by hand.
I'm attempting to convert the following Image to vector using Illustrator CS6: URL.....
I've been messing around with Live trace for a few days, but every time I try to convert it to Vector, it destroys my gradient, and converts my Pantone to CMYK.
URLs.....What I need to do, is convert to vector while keeping the gradient, and pantone colors in the graphic to prepare for screen printing.Before anyone says "you don't need to use vector for screen printing". We run Corel X4 on our transparency machine, so I need to convert to vector, and keep the halftones fine, as well as keep the pantone color book.It doesn't need to be a "quick" way to do it...it just needs to be done.
I created a canvas with 10 x 15 cm.
I am unable to create a vector rectangle or to set a raster image layer to fit 3 x 4 cm. I intend to fill the 10 x 15 cm canvas with a plenty of 3 x 4 cm photos.
a) Considering a rectangle vector, I set it to 300 x 400 (width x height), but the size don't match 3 x 4 cm, since the ruler (preferences/units/ruler) is set to cm an it is clear the 300 x 400 vector is smaller than 3 x 4 cm. Then, how could I set vector size to millimeters or centimeters?
b) I paste an image as new layer in the 10 x 15 cm canvas. The pick tool allows just scale the image, but I would like to obtain more control over raster image size. So, similarly to the vector issue, how could I set raster size (layer image into bigger 10 x 15 cm canvas) to fit 3 x 4 cm exactly?
OK, I have a design (vector) that I want to print at only 10 to 20% , ie, more transparent. How to do it?
View 7 Replies View RelatedI imported a vector image into an existing file. Then I ungrouped the imported image and changed the colors. Now I can want to shift the position and copy the imported image into another design.
Unfortunately when I click on it the image is still broken apart so it selects only the areas the cursor lands on...how do I group it back together so I can move the position of the entire image and copy it into another design?
bg color of combined shape.jpg
I am creating some geometric patters with the transform tool. Basically a shape is rotated about a center point. When the shapes are combined they create some quick interesting shapes. However, is there a way to fill in the gaps in the combined shape automatically, without having to manually use the smart fill tool?
Breaking the shape apart does not work, because the geometric pattern is based on the overlaps. I included a jpg of what I am doing to circumvent the manual smart fill, but is there an easier way, especially where the geometric patterns become very complex.
I can take the object, trim from a background, break apart that trimmed shape, then color it, or group or shape into a single curve, then align and group with the original object. But just looking to see if there is another easier way.
I am using Creative Suite 5.5 on my MacBook Pro...and today had issues demonstrating the simple process of dragging one person/image onto another, applying a quick mask to do some simple morphing.
But...one, I couldn't drag the image from the internet and drop onto the project, but had to go to Edit and copy, then create a new file and hit paste. Placing one image side by side to another...I was not able to drag the image of one person to drop onto the other. I either had to use the marquee tool, drag around the image, copy and paste or...found I could drag the image from its layer in the layer's palette and drop onto the project.
More frustrating was that once I had both images in the same project, I was not able to move the new person/image added to locate in right position over the background person/image. I would drag it to that new location, and it would snap back to the original location. Obviously the need to take any image added and move it around to orchestrate your image is important.
I have asked a number of artist friends, checked the mode (both images are RGB) and both images at 8 bits...
I presume it is a simple command that will release the image to stay where located using the Move tool...but am not familiar enough with Suite 5.5 obviously.
how to distribute vector or raster evenly within a specific part of my canvas, i can get it done evenly to the width of the canvas. for example i want about 4 rectangles in just a section of my canvas at the same distance from each other.
View 8 Replies View RelatedI would like to convert a jpg image into a vector is that possible? I have search for tutorials on the net but have yet to find anything suitable. Below are the two images I would like to convert into vector to use as website logo.
View 6 Replies View RelatedWhy does my vector line look like a bitmap when I shrink the image down. Instead of a sharp black line (vector), I get a broken, gradient gray black line (looks like a bitmap)?
View 1 Replies View RelatedI have a vector that is 1000 pixels wide and 500 pixels high. How do I reduce it down to 1000pixels wide and 120 pixels high? Can I do that without distorting the image?
View 2 Replies View Related[URL]
I made a circle over a image. I want to erase-trim the image outside the circle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Cupcake Teddy.cdr
I have traced this image from a Jpeg into a Vector to colour but how can I change the black out lines into other colours. When I right click the mouse with an outline selected the colour appears around the line but there is still a fine black line in the centre of it. I want to change the actual outline into another colour
New to Corel Draw. We just purchased a laser cutter to cut our stencils (we airbrush), but having a VERY hard time figuring out how to prep the vector images. We follow instructions, but it seems to always have a problem. We usually separate layers on photoshop and then trace on Corel so it can be a vector, but it doesn't seem to be working. What is the easiest, most simple way to turn an image into a vector so we can send it to the laser software??? Only doing black and white, one layer at a time.
Just need simple instructions, and most seem to be WAY too complicated or always have some complication. I have watched videos and read instructions, got close, but no cigar. Sometimes I think I have a vector, but when I send it to the laser software it doesn't detect it. I need simple instructions, Simple simple!
Can I make an image a vector without tracing it? Does it have to be a bitmap to be a vector? I can't turn images into curves because the option is gray (not available). If I select hairline it puts a hairline border around the image and I don't want it cut!
I have an .eps file I am trying to import into corel 11 and it keeps coming over as an image and not vector. I also am getting error messages when I use the filters.
View 10 Replies View Related