Paint Shop Pro :: How To Distribute Vector Or Raster Evenly Within Specific Part Of Canvas

Dec 3, 2013

how to distribute vector or raster evenly within a specific part of my canvas, i can get it done evenly to the width of the canvas. for example i want about 4 rectangles in just a section of my canvas at the same distance from each other.

View 8 Replies


ADVERTISEMENT

Paint Shop Pro :: How To Set Vector / Raster To Centimeter Into Bigger Canvas

Jul 23, 2012

I created a canvas with 10 x 15 cm.

I am unable to create a vector rectangle or to set a raster image layer to fit 3 x 4 cm. I intend to fill the 10 x 15 cm canvas with a plenty of 3 x 4 cm photos.

a) Considering a rectangle vector, I set it to 300 x 400 (width x height), but the size don't match 3 x 4 cm, since the ruler (preferences/units/ruler) is set to cm an it is clear the 300 x 400 vector is smaller than 3 x 4 cm. Then, how could I set vector size to millimeters or centimeters?

b) I paste an image as new layer in the 10 x 15 cm canvas. The pick tool allows just scale the image, but I would like to obtain more control over raster image size. So, similarly to the vector issue, how could I set raster size (layer image into bigger 10 x 15 cm canvas) to fit 3 x 4 cm exactly?

View 4 Replies View Related

Photoshop :: Evenly Distribute Horizontal Strips In Canvas

Jul 7, 2012

I need distributing horizontal strips of images into a 720x480 canvas. The images vary in heights and constant in width= 720 pixels. For example, i get a set of 17 horizontal strips. 10 strips with height of 8 pixels each, and 7 strips with height of 13 pixels each.
 
I need to figure out a math formula that will give me the spacing in between these horizontal strips that would allow me to put them evenly onto a 720x480 canvas.
 
they can not overlap.

View 11 Replies View Related

Xara :: How To Evenly Distribute Objects Around A Circle

Mar 22, 2012

Is there a method to evenly distribute objects around a circle? I understand the horizontal and vertical alignment tools, but I'm not sure how to apply them in this situation. Attached are a sample picture of what I want to accomplish and the .xar file (XDP7).

Circles01.xar

View 9 Replies View Related

Illustrator :: How To Evenly Distribute Objects On Circular Path

Nov 6, 2013

When I use "object/blend/replace spine" it will distribute the objects evenly around the circle, but with no rotation. My issue is that I have objects shaped like people and would like them evenly around the circle, but rotated correctly so that their feet are all touching the circular path and their heads are always facing out. How can I achieve this?

View 2 Replies View Related

Illustrator :: How To Distribute Group Of Objects Evenly Around A Circle

Apr 28, 2013

I am working on a personal data visualization project but currently stuck and can't go forward. As you can see below in the image, I created all my data bars and tried to distribute them on a 360 degree path myself.

But clearly, I couldnt able to create a perfect 360 path.
 
All of the bars are each group objects on their own. I am sure there is a way to distribute them perfectly on Illustrator but I cant find it. There is a option on Blend>Replace Spine but it is not active.

View 6 Replies View Related

Illustrator :: Distribute Text Evenly Along Circular Path

Oct 14, 2012

I am fairly new to Illustrator, currently working on a project involving circular return address lables.  On the labels, the address text follows a circular path with bullets between the name, street, and city/state/zip. Now that I've entered all of the text onto the curved path, how do I distribute it evenly along that path?  In other words, how do I ensure that the same amount of space exists at the beginning and end of my line of text?  Right now, there is "leftover" space at the end of the address.

View 4 Replies View Related

Illustrator :: Distribute Spaces Option Doesn't Space Evenly In CS6

May 24, 2012

I'm working in Adobe Illustrator CS6 and neither the Distribute Spaces Option nor Distribute Object Option are working.It doesn't seem to matter if it's a print or web document. Doing the same thing to the same document/graphics in CS5.1 works perfectly.
 
Copypasteing the correctly distributed objects from CS5.1 to CS6 works ok, and if i then repeat the Distribute spaces option nothing changes and it stays correctly distributed. (read: it doesn't badly distribute like before)

View 5 Replies View Related

Maya Animation :: How To Evenly Distribute Locators On Motion Path Along Nurbs Circle

Jun 11, 2012

Any way to evenly distribute Locators on a motion path along a nurbs circle? Its for a mouth/lips rig. and I need it to be symmetrical with out manually inputting values.

View 2 Replies View Related

Paint Shop Pro :: Select Certain Number Of Nodes Evenly Spaced While First And Last One Stay As Anchors

Jan 25, 2012

Sometimes, i work with the Warp Mesh, and i need to make something with a smooth curve. I often end up with several lines following the curvy line i want but i would need to have them perfectly equidistant from one another. Is there a way to select s certain number of nodes and have them evenly space while the first and the last one stay as anchors?

View 2 Replies View Related

Paint.NET :: Convert Raster Image To Vector One?

Oct 13, 2011

Does Paint.net have a tracing tool that can convert a raster image to a Vector one?

Something like Adobe's StreamLine or now LiveTrace which is part of the Creative Suite package?

View 2 Replies View Related

Paint Shop Pro :: Joining Vector Nodes In Vector Layer?

Dec 24, 2011

I am "vector tracing" a logo in PSP, and exporting it to Motionstudio 3D for an explosion effect. I am currently able to do this with no issue, but the explosion effect (specifically the size and shape of the particles) is based on connecting the nodes in a vector object. For example, if I have a capital L made up of 10 nodes, the subsequent explosion effect with separate the L into particles based on the 10 nodes. What I want to do is have the various nodes that comprise the traced letter connect with constituent nodes in the center/surface-area of the letter to form a "grid" (in PSP) so that the subsequent explosion (after export to Motionstudio) is comprised of more/smaller particles. Is there a way of not only having a vector object with "fill", but also having that "fill" made up of other vector data?

View 5 Replies View Related

Paint Shop Pro :: Using Pen Tool For Raster Selecting

Oct 10, 2012

I do not want to use the the Pen Tool to make selections of Vectors! I want to know if it possible to use the Pen Tool to select say the eyes or the arm or the chair or the apple, etc! Then convert that vector pen tool selection into a Raster selection?

Photoshop and Gimp do this! I would love this feature in PaintShop Pro X5, but since that out maybe the next version X6!

View 2 Replies View Related

AutoCAD Inventor :: Moving Solid Part In Assembly Using Grip Snaps And Specific Vector Direction

Sep 4, 2013

Is there a way to move a solid part in an assy using grip snaps and a specific vector direction .

Please look at the attachment,here you will see a gusset positioned on top of a foot plate,the gusset needs to be moved so that it makes contact with the cylinder,it will then be welded. The problem is more difficult because the gusset is offset to the axis of the cylinder and the precise distance is unknown unless worked out using trigonometry.

The question is what is the best method of moving the gusset to the precise distance and direction ?

View 3 Replies View Related

Paint.NET :: Grid Overlay Onto Canvas - Inset Rectangles Of Specific Size

Aug 18, 2011

1) Can I put some sort of grid overlay onto the canvas?

2) How can I insert rectangles of a specific size>?

View 2 Replies View Related

Paint Shop Pro :: Use Of Filters Unlimited On Raster Background

Dec 2, 2011

Just a question why cant i use Filters Unlimited on a Raster Background in PSP4. When i try it only fills a quarter of the image.

View 3 Replies View Related

Paint Shop Pro :: X4 Canvas Size After SP2

Jul 4, 2012

Image menu>canvas size: I can no longer type new dimensions in the number boxes. I have to use the sliders or the arrow keys.

View 2 Replies View Related

Paint Shop Pro :: Canvas Size On X4

Dec 13, 2011

I've been using PSP for a long time now (fisrtly PSP7 and now PSP9) and I wanted to buy the new version PSPX4. I downloaded the free-trial version and I saw that it is impossible to generate files bigger than 10'000x10'000 pixels. In the canvas size menu, it's impossible to give a higher number. The problem is that a made bigger files with PSP9 and I'd like to keep on working on it without resizing them.

So my question is : Is it only a limitation of the trial version or is it simply impossible to work with bigger images than 10k x 10k ? I hope there is a simple solution because PSP9 encounters some problems with Win7...

View 11 Replies View Related

Paint Shop Pro :: Opening To Specific Layout

Feb 22, 2013

Right now my program opens to the "manage" screen. I changed it way back when, due to freezing issues. It's freezing more and more now and just recently started showing a HUGE preview screen on the right. Not sure what I did to cause this but I'd like to change it back to opening to the Edit screen.

View 2 Replies View Related

Paint Shop Pro :: Effect To Make Photo Look Like Canvas Print

Jan 3, 2013

I have PSP x14 on win7 64b. I would like to make a photo look like it's on a canvas so that it would show a depth of border along the top and down the nearest side. I have tried altering the perspective and adding narrow selected lenght from the top and side of the original photo but am still not getting the effect I am after.

View 2 Replies View Related

Paint Shop Pro :: Much Smaller Limit To Canvas Size In X4 Compared To X3?

Oct 8, 2011

I'm trying out X4, and I don't know if I'm doing something wrong, but it seems like the canvas size on X4 at any resolution is much smaller than in X3, e.g., at 200 pixels/inch, X4 allows 50"x50", while X3 allows 164x164". Similarly at 150 pixels/inch, X3 allows 218", while X4 allows approximately 67". Given the fact that X4 is supposed to provide access to more memory, and uses a scratch pad, this does not make sense to me-

View 4 Replies View Related

Paint Shop Pro :: Configure X3 To Open In Specific Folder

Jun 14, 2011

How do I configure Paintshop Photo Pro X3 to open in a specific folder when I open the program? I have looked in preferences to no avail.

View 1 Replies View Related

Paint Shop Pro :: Cut Some Pictures Out With Specific Dimensions Of 960x350

Aug 3, 2013

I am looking to cut some pictures out with the specific dimensions of 960x350. I am using the cropping tool (free form), but it does not show me what the dimensions are as I drag it across.

Anyway to set a crop to that size and then I can just move it around the picture till I have it just where I want it?

View 13 Replies View Related

Paint Shop Pro :: X3 And X4 Cannot Use ANY Text Other Than Vector?

Dec 11, 2011

have used Paint Shop Pro X3 for as long as it has been around and could always change text(select the text tool)from Vector to floating before actually typing the text. Now after not making any changes to psp pro x3 I it sticks on vector all the time. PSP PRO X4 Does the exact same as well. It defaults to vector and will not let me change to floating.

View 2 Replies View Related

CorelDRAW Graphics Suite X3 :: How To Space Lines Evenly Along Radius Of Specific Range

Jul 11, 2011

I have a radius that is spread between 10 and 40 degrees that I need to evenly space 6 line segments throughout.

What this is for is a property with 5 lots along a curved street. Each lot is the same size and I am trying to draw just the sections that are affected. I have tried using the star feature and reducing it to single lines, but they do not space evenly and getting the line number is very difficult. I have tried dividing the angle range and come up with the correct angle and spacing but this is also an issue. Is there any way to do this without dragging each line separately?

View 8 Replies View Related

Paint Shop Pro :: Current Way To Split / Combine And Add Specific Channels

Sep 24, 2013

Working on some game development and purchased PSP Ultimate recently right before it changed to version 6 and received email saying account would be deleted if I didn't post, though I normally cut down on uneccessary postings as much as possible to keep clutter down and be as reasponsible as possible I might as well bring up some questions in form of new posts I had forgotten about earlier.

One of them is what is the best way to Split RGBA so I can work with them similiar to Adobe Photoshop in Layers and then Add information to a specific channel such as the Alpha Channel and re-merge back into a single RGBA file all within Paint Shop Pro so if I am needing to put the data in Alpha channel and the engine I'm using requires it to be there it would read it that way?

View 2 Replies View Related

Paint Shop Pro :: Vector Text In Script?

Feb 6, 2012

(PaintShop Pro v8.10)

I have a single vector text instance in my (PSP file) image. It says "cat". I want to make multiple copies of the image but with the word "cat" localized into different languages. Rather than editing the vector text via the "Text Entry" dialog box I was hoping to be able to do this with a script. The the idea is that I would have a copy of the script for each language, change the relevant text as required and run the script. E.g. For French, I would edit the script changing "cat" to "chat" and then run the script against the French image.

So first I wanted to identify the part of the script that I would need to edit. To do this I created a script as follows: I started the script recorder, change the text "cat" to "dog" in the Text Entry dialog box, saved the script, opened it in a text editor and searched for the text "dog". However, the word "dog" does not appear anywhere in the script. I don't understand this. Where is the vector text "dog" being stored? If I run the script against a different image that also has a single instance of vector text, it changes the text to "dog", so the script is working correctly.

View 4 Replies View Related

Paint Shop Pro :: Text On Vector Layer

Jun 27, 2012

I've been marking-up images with vector text (on vector layer) and have some issues. After clicking to position the text box, typing in text and then clicking the CHECK tool button to 'set', how does one go about deselecting that text object? It's not working smoothly here!!

View 1 Replies View Related

Paint Shop Pro :: Copy A Vector Image

Oct 10, 2012

PSPro X I screen captured a map then added text (and arrows via the paint brush).It is now a vector image.What do I need to do to copy 100% of what is in the image to a word 2003 doc.

View 6 Replies View Related

Paint Shop Pro :: Text Vector Layer

Nov 23, 2013

I am creating a photo collage and have created a Vector Layer (Text Tool) however I am unable to see this text on top of a Raster Layer (Photo). However the Text is visible if I move it onto the Background. I am unable to Arrange the Text to the Top.

View 1 Replies View Related

Paint Shop Pro :: Vector File Formats

Feb 16, 2012

I am finding some difficulties to deal with vector files in PSP.

a) When reading=> I saved several .SVG files from Inkscape software and PSP isn’t able to open the files (I could open them through GIMP). The “SVG import” dialog box opens in PSP, but when I click in “ok” a message mentions “this is not a valid SVG file”. What could be happening? What is the better/compatible vector file format that PSP is able to handle?

b) When writing=> I created a vector logo with text and drop shadow in layer style. I would like to send it to other people that don’t have PSP. So, is there any vector file format which PSP is able to write/save? I tried to save it in .WMF and .EMF, but the output isn’t good (the definition isn’t good, the shadow doesn't appear, when I insert the logo in Word the text character changed to japonese character).

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved