CorelDRAW X5 :: Print CMYK Profiling Target?
Sep 23, 2011what the correct way to print CMYK profiling target using corel draw X5.
The target is in tiff file format, I'm suing xerox DC250 with creo RIP.
ADVERTISEMENT
CorelDRAW X5 :: Print With White In CMYK - Comes In Beige / Yellow
Dec 13, 2012When I print something with white in CMYK, the printer comes in beige / yellow?
View 2 Replies View RelatedCorelDRAW X5 :: Print Preview Is Showing 100% Grayscale As CMYK
Aug 13, 2012I've been searching for this for over a week & finally thought I'd better go to the experts!
I have a 2 page document that has CMYK on one side and 100% Gayscale (with 2 Grayscaled bitmaps) on the other side. My problem is that when I go to print preview it shows the Grayscale as CMYK Separations. My printer is counting it as color instead of grayscale so we are being charged much more than the grayscale would be. I haven't changed anything in my color profile and actually deleted my ColorSettings.xml and rebooted Corel Draw to reset the color profile default. Still no change.
What I am used to (& what I need) is for the print preview to show my page 1 as CMYK separations and my page 2 as black like it used to. I do a lot of ads and need to be able to determine if there is any color in my document when there shouldn't be.
Problem number 2 is that around my grayscaled bitmaps when my document is printed there are thin black lines showing up where the edge of the photo is. None of which shows up in print preview.
I am using Corel Draw X5, Windows 7 - 64 Bit
CorelDRAW Graphics Suite X4 :: Print CMYK Plates
Apr 25, 2013I am trying to make CMYK printing plates for process work. How would I take my picture and divide it up into CMYK so I can print each color one at a time onto a polyester plate? I use corel X4 and my printer for the plates is an HP 5100. Can this even be done?
View 5 Replies View RelatedPhotoshop :: Color Profiling
Jun 29, 2007I have a setup like this;
Samsung 226BW LCD monitor
Canon Pixma IP4300
Adobe Photoshop CS3
My objective is to make sure that my CS3 is color managed with my lcd and printer. FYI, I shoot with dslr and my photo uses Adobe RGB profile. Some info you may need to know;
Photoshop :: Colour Profiling With Canon IP6600D
Jan 2, 2013I am using the above printer on Canon Photo Paper Plus Glossy with Canon original inks. If I let PS (CS6) manage the profile and set the printer driver color correction to NONE the driver set itself back to Driver Matching setting straight away. The result is extremely saturated colors in some areas.
If I don't allow PS to manage the profile but let the driver do it automatically the color results are much better but... surely it would be better to have PS managing the color profiles.
Photoshop :: CMYK Consistency Between Screen And Print
Nov 20, 2005I am working in PhotoShop CS in CMYK. I am satisfied with my colors in PhotoShop, but when I import the graphics into InDesign, the colors dull considerably. I take this to mean they will print similarly.
I have had issues with getting my CMYK files to print like they look on screen. Does anyone have any tips on how I could get what I see on the screen to match more closely what will come out of the printer?
Illustrator :: CMYK White Elements Don't Print
Jun 15, 2012I have an Illustrator CS5 logo with a tagline beneath that is converted to outlines, all in white, zero values for all four channels. There aren't any FX, graphic styles or anything applied to them, nor are there any bitmaps. They're just compound and simple paths filled with white. The logo previews in the print dialog box and prints, but the tagline below doesn't appear in either case.
I tried several things, like the deconstruction of the letters to simple paths, which showed everything as simple paths but nothing came of that. I also tried coloring everything with "White2" swatch, resaving the .EPS as .AI and .PDF, changing the size of the artboard, reverting to legacy, copy/paste to a new file, etc. Finally...I tried converting the CMYK file and graphics to RGB and it all previewed/printed.
I am on a MacBook Air with Lion 10.7.3. There's no print driver yet for our Canon; so I'm using a generic PostScript driver for the time being (betting this is the culprit). There are a tremendous number of print options that I don't have time to test.
Illustrator :: CS6 File (CMYK) Won't Print Color
Jun 24, 2013I have an AI CS6 file (CMYK) which I can not print in color. When I save as a PDF file and print it using Reader it prints out in color. My other AI files print in color without a problem.
View 1 Replies View RelatedPhotoshop :: Final CMYK Print Out Color Quality
Jul 29, 2003I'm making an ad with alot of bright colors. It's gonna be printed to a glossy photo paper for distribution, but I'm having a hard time getting the monitor colors to match the printout colors.
I started as RGB workspace, then once finished I converted to CMYK, but the colors drastically get dull.
I know that it is normal for colors to change during RGB to CMYK transition, but is there any way I can preserve those bright colors?.. (it's mostly bright orange and green.)
Workspace specs :
RGB : ADOBE RGB 1998
CMYK : SWOP V2 20%
Conversion : ACE
Intent : Relative colormetric.
Revit :: Profiling Topography Under Undulating Concrete Floor Slab?
Aug 29, 2012Is there a quick way of profiling topography under a undulating concrete floor slab? In other words so that the topography follows the underside surface of the slab. I know this is possible by adjusting each point on the topo surface but is there a quicker way?
View 1 Replies View RelatedIllustrator :: How To Convert CMYK Artwork For Spot Colour Apparel Print
Sep 11, 2013I'm pretty new to preparing artwork for spot colour printing - it's a hoodie design in this case.
I created the artwork in CMYK originally, and have got some of the way towards converting into a 5 colour print job using Recolor Artwork, so I've got it down to 5 swatches.
However, the printer is asking for colours separated by layers, which makes sense - I think means knocking everything out so there is no overprinting - is this correct?
If so, what is the best approach to take, to avoid unnecessary work, to convert from the current artowrk, with a lot of overlapping artwork, to produce 5 layers each with vector artwork coloured with its own Pantone swatch?
Photoshop Elements :: Create Digital File For Print With CMYK Setting?
Mar 25, 2014How can i create a digital file for print with a CMYK setting?
View 3 Replies View RelatedCorelDRAW X5 :: Printing With CMYK (Win 7 / 32)
Jun 29, 2013Since yesterday all of a sudden my OKI color printer shows white areas in a sandy color, when I use CMYK as color modes. Other colors are shown in false colors, too. This effect is also shown in print preview, what means for me, it´s not a printer issue.
Refilling areas with colors in RGB works, but I don´t want to live with this workaround. Nearly all my Corel graphics are made using CMYK.
CorelDRAW X4 :: RGB To CMYK Conversion
Nov 8, 2011I have finished a logo for my friend Bob in Corel Draw X4. Made it in CMYK color mode. Used 3 nuances of green color previously given to me vith RGB values. My Corel change it to CMYK. I sent the file to Bob.
He has Corel Draw X5. When he opened the file and checked the CMYK values he was surprised because they were different from mine.
I immediately found an on-line RGB to CMYK converter to check which data is more valid when i got totally different CMYK values. Now i am truly worried and don't know what to think.
Here are the values:
BOB
RGB 116/195/101
CMYK 60/0/84/0
RGB 41/171/135
CMYK 80/7/64/0
RGB 144/238/144
CMYK 42/0/63/0
ME
RGB 116/195/101
CMYK 31/0/37/24
RGB 41/171/135
CMYK 51/0/14/33
RGB 144/238/144
CMYK 37/0/37/7
ON LINE CONVERTER
RGB 116/195/101
CMYK 40/0/48/23
RGB 41/171/135
CMYK 76/0/21/33
RGB 144/238/144
CMYK 39/0/39/66
CorelDRAW X5 :: How To Disable CMYK
Aug 8, 2013I was at a corel seminar this weekend and there was a lot of discussion about RGB & CMYK. In the class they showed us how to disable CMYK but I was not close enough to see how this was done.
View 1 Replies View RelatedCorelDRAW X5 :: CMYK Export In X5
Dec 16, 2011We are doing Bars charts in Microsoft Excel and copy past (speical) them in Corel Draw to have an vector form.
When we export them as CMYK in .EPS format.
In priting we are getting RGB colour (the colours point towards lines in chart)
But the question is that when we group /select all the objects in coreldraw file and export them in CMYK in .eps format, why does every object does not convert into CMYK.
CorelDRAW X5 :: Publish To PDF Both CMYK And B&W Barcode
Aug 7, 2012I am a musician doing the CD cover of my band's 3rd CD.
On the CD back I have images, text and the usual barcode. How can I publich to pdf from X5 so my images keep CMYK and my barcodes keep Black & White? My CD label gave this comment after the pdf I sent them:
"I think you do not understand that the barcodes and codes in general HAVE TO BE IN BLACK/WHITE. You cannot just integrate it in the 4 colour artwork as if it is a picture."
I use X5 upgraded directly to SP3 and PDF file shows Corel PDF engine version:15.2.0.686
CorelDRAW X6 :: Macro To Convert RGB To CMYK
Sep 19, 2013I have downloaded a Free vector (.cdr) file which was designed using RGB color. This files has 100's of objects that are in color with RGB..
Is there a way to convert the RGB color's to cmyk without having to do each one by hand?
Maybe some kind of "Macro?
I need to do this because I am going to have this design printed on a T-Shirt and the printer uses "CMYK 4-Color Process" for their printing.
CorelDRAW X6 :: Color Default - Set To Be Always In CMYK
Dec 2, 2012How do i set my colors to be always in CMYK, we always print so i need it to be in CMYK,
View 2 Replies View RelatedCorelDRAW X3 :: Converting CMYK Drawing To RGB
Apr 21, 2008How a drawing in CMYK can be converted to RGB ? At present i am selecting each element of the drawing and manually converting it.Tried the Visual Basic 'File Converter' option, but it doesn't work.
I hope there is a better way as i have many images to convert.
CorelDRAW Graphics Suite X3 :: CMYK To RGB
Apr 8, 2013COREL PAINT X3 does not do a very good job of rendering most of the CMYK images we've been getting in from our Taiwan base, and, due to language problems, we have been unable, despite decades of trying, to communicate the issues. Typically we do the original photo here, something that I used to do, but now the company uses a professional photographer - not wanting to spend big bucks on a professional camera.
His ultra-hi-res RGB photos are sent to Taiwan, where they are cleaned up and converted to CMYK using an unknown color scheme, for use in printing our mini catalog. Then I get the catalog back - in InDesign - with instructions to convert the linked CMYK photos back to RGB for use on the website, etc. The color model that they are using in Taiwan, however, typically has deep black at something like 70,65,65,70, which shows on the screen in Paint as very dark and garish, and it means that if I use the default RGB conversion, it looks that way in RGB as well, and half the picture will be solid black - 0,0,0. I.e., unusable. Oddly enough, however, it prints just fine.Now I'm pretty good with Paint, and I know how to use the tone curve to reset the values in the CMYK to usable levels, but it takes time, usually 3 or 4 tries to get it on the money, and of course in the process I'm compressing the color space by half, so there is an inevitable loss of detail.Of course, if I could get them to send us the original RGB or their cleaned up - background dropped out - version in RGB, then the problem would be eliminated, but no luck so far on that. My question is, is there any way to simplify what I'm having to do?
CorelDRAW X3 :: Working With Bitmap In CMYK?
Jun 10, 2011when im working a bitmap in corel draw and then finish them and i need to savi it in CMYK,how can i do that?? when i go to the simple way and just export them i lose my initial colors of the image.
View 7 Replies View RelatedCorelDRAW X6 :: Convert CMYK To Pantone
Jun 29, 2013I have a client that gave me some artwork created in CMYK with plenty of half tones. Unfortunately, it breaks down into 1558 colors. We need to convert it to Pantone for screen printing. The whole thing can be reduced to 6 colors without changing the look. Is there a process that will automatically convert the CMYK colors to close matching Pantone colors without going through each individual color and halftone, which would take forever..
View 1 Replies View RelatedCorelDRAW X6 :: RGB Text Converted To CMYK
Apr 2, 2012When opening a prior version CDR the RGB black text is converted to CMYK, othere RGB objects remain RGB. This is a big problem for me as printed blacks will be dark brown not K.
View 14 Replies View RelatedCorelDRAW X4 :: Get CMYK Percent Coverage
Nov 18, 2008I'm looking for a way to get a percent coverage figure for each C M Y and K so I can more closely determine print costs when printed to a CMYK printer where yeilds are given for 5% coverage. I'd like to find a way to take a corel document and determine that when printed this page is approximately 25% black coverage, 4% cyan coverage, 6% magenta coverage, and 2% yellow coverage for example.
View 14 Replies View RelatedCorelDRAW X6 :: Color Change CMYK To RGB
Oct 22, 2012A few months ago I made the switch from X3 to X6. I use Corel for lasering, and need a RGB red hairline for the vector cutting. All of my old files were done this way, but for some reason when they are opened in X6, they are opening with a CMYK red hairline, which does not cut on my laser.
Is there a way to get this to change automatically on old files, or do I just have to do it manually as I need them? I have thousands of files, and I seem to forget to change this sometimes.
I do have it set for RGB to be my default now, so anything new I create isn't a problem -- just the old files.
CorelDRAW X5 :: CMYK As Primary Color Mode
Feb 21, 2013Create a new document in X5. Choose CMYK as the "Primary Color Mode" in the "Create a new document" dialog box.
Draw a rectangle. The Eyedropper Tool tells me it is RGB 0, 0, 0. Shouldn't it be CMYK 0, 0, 0,100? Is there a simple way to fix this to default to CMYK?
CorelDRAW X5 :: Converting Registration Black Into CMYK
Mar 6, 2012I work at a small newspaper and use CorelDraw X5 (the rest of the newspapers in our company all use Adobe products).
When we get for example, a logo sent to us (also happens with PDF's that are sent to us as well), many times the black is registration black and I need it to be CMYK.
When we PDF the ad to send it for printing the black is on all 4 plates (CMYK) our printer says, drop CorelDraw spend $2000+ and get in design and CS5 and your troubles will go away. I am hoping there is a solution that lets me continue to use CorelDraw as I love this program and do not want to switch.
CorelDRAW Graphics Suite X4 :: Saving To X3 - RGB To CMYK?
Feb 4, 2008Is there any other way to save X4 files to X3 without going into the save dialog and changing the version you want it to be saved in? Also Is there any other way for me to convert all rgb in a document to cmyk without selecting the objects or using the object manager?
View 5 Replies View RelatedCorelDRAW X4 :: RGB To CMYK Clipart Color Conversion
Mar 24, 2011Is there a way to have Corel Draw X4 automatically convert all RGB colors into CYMK? I've a very complicated clipart and all colors are RGB; I don't want to convert the clipart into a bitmap to change the color mode.
View 8 Replies View Related