I have finished a logo for my friend Bob in Corel Draw X4. Made it in CMYK color mode. Used 3 nuances of green color previously given to me vith RGB values. My Corel change it to CMYK. I sent the file to Bob.
He has Corel Draw X5. When he opened the file and checked the CMYK values he was surprised because they were different from mine.
I immediately found an on-line RGB to CMYK converter to check which data is more valid when i got totally different CMYK values. Now i am truly worried and don't know what to think.
Is there a way to have Corel Draw X4 automatically convert all RGB colors into CYMK? I've a very complicated clipart and all colors are RGB; I don't want to convert the clipart into a bitmap to change the color mode.
Importing a file in RGB and converting it to CMYK values are different estremamante performing the same operation in photoshop. The setting of the color profiles is the same and also varying the options Microsoft ICM CMM in color management, keep varying the pure black and gray to black colleague CYMK, does not improve anything. The conversion in coreldraw is too much dark and this is a problem. How is it possible?Here the setting of CorelDraw and Photoshop.
Recently found another bug in X6. This time it is in the Pantone conversion tables when converting to cmyk. I had a job that had been updated over the years and the file was last used in X5. The colour in question was PMS 7406. The file opened fine & was converted to cmyk and sent to the printer unchecked. What could possibly go wrong - this file had been used countless times before without incident. Pantone 7406 breaks down to 18% magenta and 100% yellow (as per Pantone's own specification). X5 converted it to 17% magenta and 100% yellow. Near enough - I'm not going to quibble over 1%. However, opening the X5 file in X6 caused it to use the 'Pantone previous version' colour table (and you don't get any notification that it is doing it). Result is that it now converts the colour to 18% cyan, 24% magenta and 100% yellow. Where the #@**# did it get the cyan from? We are now talking about a completely different color!
It gets worse. If you create a new object in X6 and fill it with PMS 7406 (using the Pantone + colour table) and then convert it to cmyk, you get 6% cyan, 22% magenta and 100% yellow. Again, this is not the correct break down of this colour. Pantone is a world standard with known conversion to cmyk figures. InDesign can get it right, Illustrator can get it right, then why can't Corel? And how many other Pantone colours are wrong? I have used Draw for 20 years and this is the worst bungle yet (apart from version 4). For a program that tells the world it is a professional program to screw up like this beggars belief.
If we have to check every single Pantone to cmyk conversion against the Pantone specifications, then it just isn't worth using Corel in printing. Add this to the font problems in Font Navigator and the scale error in Barcode Generator and it make X6 pretty much useless in the print industry. Throwing in freebies like fonts, second rate web creators and Photo Paint are not much use when the flagship program is sinking.
I recently photographed a set of pastels in raw. The body of work has been reviewed and the final color balance has been approved by the artist. I now need to export the images from their raw files to CMYK. to provide for offset printing. Adobe provides a number of options. I am completely lost on the options to select.
I have designed a CD cover for my band that we will have professionally printed. I'm now told that having designed the whole thing in Photoshop using RGB, that it needs converting to CMYK in order that it prints out properly at the Cd Printing firm.
I have found the "image>mode>CMYK colour" function, but when I click it, it makes the whole image really dull and lifeless.
i convert an image from rgb to cmyk to be printed i loose alot of my brighter colors...namely blues....i know these rich colors can be printed...(i see them all the time on flyers and magazines)...so what can i do to keep these colors...
I'm working on an image that I imported from an .eps file. I just noticed that it's in CMYK. I'm almost done, so I can't restart. I guess because .eps files are mainly used for printing from, it defaults to CMYK. ANyway, when I go to covnert to RGB it says it may alter the appearance. I can't see any difference, but I don't want to come back and kick me later. Does anyone know of any serious problems that can arise from changin image modes halfway through?
With previous versions of Photoshop, when an RGB image in a given RGB colourspace was converted to CMYK by choosing Mode -> CMYK, it would convert to whatever CMYK was set as the Working Space in the Color Settings. With CS4 there's a warning dialogue that appears that makes one wonder if CS4 is behaving differently. It now says:
"You are about to convert to CMYK with no color profile. This may not be what you intend. To choose a profile, use Edit > Concert To Profile".
The resulting CMYK would certainly *have a profile* as it's the default selected in the Color Settings > Working Spaces menu. It's the same as if I had a CMYK file and selected Mode > RGB. This would convert from CMYK to whatever default RGB space is set in the Working Spaces menu. Yet from CMYK to RGB there is no such warning. Why not... the same logic would seem to apply.
I think the warning just confuses to user and makes them think an error's about to occur. A more appropriate warning might be:
"You are about to convert to your default CMYK (Color Settings > Working Spaces). This may not be what you intend. To choose another profile, use Edit > Convert To Profile".
Is there anyway to convert 0/0/0/100 Black to PMS Black by replacing the cmyk swatch with the PMS swatch? I have a bunch of Illy packaging files that are using CMYK black that need to be changed to Pantone Black C and the only way it seems that I can do it is by selecting same fill and/or stroke. I tried using recolor artwork, but cant get that to work with cmyk black either.
After Copy/Paste form PS cmyk object/picture into AI i noticed that it looses original colors making color conversion CMYK->RGB->CMYK (with AI defined cmyk profile).WHY?
Didn't find any preference in AI (or PS) about that.
When a mixed RGB/CMYK PDF is opened in Illustrator CS6, Illustrator forces a conversion to one color space or the other. See this screenshot: [URL]
I assume this is a limitation of Illustrator and there's no way to keep both color spaces. Under that assumption, Is it possible to choose the profiles used for the conversion from RGB to CMYK? Can Illustrator be made to use the RGB and CMYK profiles defined in its Color Settings to make this conversion?
I have been trying to find a solution to this for a couple days now. The problem is that when I convert my EPS and WMF files to JPG the results look bad. I've tried multiple programs and multiple methods. The only way I get good results are if I open the file in CorelDraw, import as curves, and Export For Web to a JPG. Otherwise, the output jpg file looks low resolution. I have thousands of EPS and WMF files that I would like to convert to JPG. Again, I can use a batch conversion program like FastStone and the results are poor.Is there anyway to automate the high quality conversion?
I've been using corel draw since version 4, and I love it. Now on x5 I cannot figure this out. I use eps files for printing large format with contour lines for cutting. My setup uses a spot color defined as "CutContour" for cutting. It seems x5 renames these colors or converts them to something else. I opened the same file in 12 and had to Reclick the same color for the cutter to see it and it worked fine. Any setting to change this?
We get .eps files from a customer and the fonts have been converted to "outlines" or "curves". This one font they used is Avant Garde Condensed and whenthe lowercase letters "f" and "i" are used together like in the word "fish" are connected together with no dot over the "i" (see attachment).
My question is this:
Is this supposed to look this way (see attachment) is this some sort of special character in the Avant Garde font family? Or is this some sort of freak accident caused by converting fonts to outlines?
I'm writing an application in C++ that loads vector images from a source directory and convert them in bmp or other non vectorial format in the destination directory. I need to load CDR file also, but unfortunatly I can't find a documantation regarding the proprietary CDR file format.
Of course, these informations aren't published by Corel that maintain the secret of the format. But my question is: does Corel sell some SDK that provides some functions, callable directly from the source code written in c++, that permits the conversion of the file?
As standard pallette we use Pantone Coated, but after I export a .cdr to .eps some colors are replaced with a new color with the same name, when I open it in Coreldraw again afterwards. The colors are placed in a new user pallette and have different CMYK values.
I'd like to create a vector graphic with precise object size and placement so that when I import into PhotoPaint I get a precise conversion.
For example (use no outlines):
make a black square 10mm in diameter create 9 colored squares 2mm in diameter placed 1mm from the edge of the black square and 1 mm from each other copy all your squares paste into photopaint setting size to 10 pixels square and turning anti-alias off what you get is not what you drew in corel draw
Here's my example as a vector:
and as a bitmap:
So the squares are completely the wrong size - 1 pixel larger than they should be and in the wrong position!
Interestingly if you import the same vector as a bitmap 100 pixels square it looks better - however you'll notice that the colored squares are, in fact, 21 pixels square and not 20!
The conversion process seems to make every object larger by one pixel in each dimension - not useful. I should note that this effect happens in X5 as well.
In 2006 I started a vector-based comic using CorelDraw, made for posting on the web in RGB. Over the years I've made the transition to a more CMYK-friendly palette that works on the web, though a handful of heritage characters still have the old RGB profiles. I'm looking to do a book collection now and, as such, want to convert these characters' specific colors to their fitting CMYK counterparts.
Is there a batch process that allows me to convert a specific handful (maybe 2 dozen) colors RGB --> CMYK across a number of files? I'm looking at hundreds of pages of artwork here, so even Corel's Object Find/Replace would be a tedious slough.
Since yesterday all of a sudden my OKI color printer shows white areas in a sandy color, when I use CMYK as color modes. Other colors are shown in false colors, too. This effect is also shown in print preview, what means for me, it´s not a printer issue.
Refilling areas with colors in RGB works, but I don´t want to live with this workaround. Nearly all my Corel graphics are made using CMYK.
I was at a corel seminar this weekend and there was a lot of discussion about RGB & CMYK. In the class they showed us how to disable CMYK but I was not close enough to see how this was done.
We are doing Bars charts in Microsoft Excel and copy past (speical) them in Corel Draw to have an vector form.
When we export them as CMYK in .EPS format.
In priting we are getting RGB colour (the colours point towards lines in chart)
But the question is that when we group /select all the objects in coreldraw file and export them in CMYK in .eps format, why does every object does not convert into CMYK.
I am a musician doing the CD cover of my band's 3rd CD.
On the CD back I have images, text and the usual barcode. How can I publich to pdf from X5 so my images keep CMYK and my barcodes keep Black & White? My CD label gave this comment after the pdf I sent them:
"I think you do not understand that the barcodes and codes in general HAVE TO BE IN BLACK/WHITE. You cannot just integrate it in the 4 colour artwork as if it is a picture."
I use X5 upgraded directly to SP3 and PDF file shows Corel PDF engine version:15.2.0.686
How a drawing in CMYK can be converted to RGB ? At present i am selecting each element of the drawing and manually converting it.Tried the Visual Basic 'File Converter' option, but it doesn't work.
I hope there is a better way as i have many images to convert.
