Photoshop :: Colour Profiling With Canon IP6600D
Jan 2, 2013
I am using the above printer on Canon Photo Paper Plus Glossy with Canon original inks. If I let PS (CS6) manage the profile and set the printer driver color correction to NONE the driver set itself back to Driver Matching setting straight away. The result is extremely saturated colors in some areas.
If I don't allow PS to manage the profile but let the driver do it automatically the color results are much better but... surely it would be better to have PS managing the color profiles.
View 1 Replies
ADVERTISEMENT
Jun 29, 2007
I have a setup like this;
Samsung 226BW LCD monitor
Canon Pixma IP4300
Adobe Photoshop CS3
My objective is to make sure that my CS3 is color managed with my lcd and printer. FYI, I shoot with dslr and my photo uses Adobe RGB profile. Some info you may need to know;
View 5 Replies
View Related
May 3, 2013
In the Print area, Lightroom 4 says in italics at the bottom to turn off the colour management in the Print Dialog if you're chosing to print with a profile.
how to do this with my Canon Pro9000 mk2 via OSX Lion 10.7?
View 11 Replies
View Related
Sep 23, 2011
what the correct way to print CMYK profiling target using corel draw X5.
The target is in tiff file format, I'm suing xerox DC250 with creo RIP.
View 6 Replies
View Related
Aug 29, 2012
Is there a quick way of profiling topography under a undulating concrete floor slab? In other words so that the topography follows the underside surface of the slab. I know this is possible by adjusting each point on the topo surface but is there a quicker way?
View 1 Replies
View Related
Nov 24, 2012
Is there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Aug 18, 2012
Will Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Jul 16, 2013
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
View 9 Replies
View Related
Jun 11, 2012
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jan 28, 2012
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 28, 2012
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Jul 26, 2013
Windows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
View 2 Replies
View Related
Jun 4, 2013
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies
View Related
Mar 18, 2008
When I open a RAW file from the 40D in PS2 I get an error message - 'could not complete your request because it is not the right kind of file'.
I've been processing 30D files (CR2 format) in PS2 for 2 years without a problem. The 40D RAW file is also CR2 format, the same as my 30D.
I'm not sure if it's a camera setting or a PS2 issue.
View 3 Replies
View Related
May 8, 2012
I just downloaded the PS 6 upgrade, and it runs fine, but won't decode my Canon 5D3 CR2 raw files. All the pages I access only tell how goood Camera Raw is. Where is the correct page?
View 2 Replies
View Related
Jul 19, 2012
I have a copy of CS4 installed on my computer. I would upgrade for CS6 (which seems to be the only solution at this point) but it's a costly endeavor.
I'm not very knowledge with Photoshop and in depth technology. I want to edit my photos in RAW, but I can't. I tried the DNG converter, and it did not recognize any files at all. I downloaded Camera Raw (the latest version as well as another one) and it said I needed Adobe Manager. I tried that as well but nothing.
View 1 Replies
View Related
Mar 11, 2012
A search indicates that Camera Raw 6.3 plugin and later will work, but it is apparently for CS5 only. Is it true that CS4 loses the ability to work with camera raw files of newer cameras? If not, where can I get a camera raw plugin for my new S95 that works with CS4? (The camera does ship with proprietary raw processing software, but I'd prefer the integration of Bridge and Photoshop.)
View 2 Replies
View Related
Mar 15, 2012
Even though Camera Raw plug-in lists G1X RAW as supported, PSCS5 will not open the RAW .cr2 files. Camera Raw plugin version 6.6.0.261 Likewise, Adobe DNG Converter says it will, but will not. Likewise Lightroom 3.
I have seen mention of a beta 6.7 that will, but I am a publisher, and don't like having to use beta software!Why is Adobe behind on this? The G1X is being sold (I have one), and should be supported in PS and Lightroom
PSCS5 12.0.4 x64
DNG Converter 6.6.0.261
Lightroom 3 3.6 with Camera Raw 6.6
View 2 Replies
View Related
Mar 12, 2013
I've tried installing a CanoScan Lide 200 scanner to be used with Photoshop CS6 but can't seem to make it work. I downloaded the two latest drivers available on Canon's website and installed them but it hasn't worked.
View 1 Replies
View Related
Mar 8, 2012
When will Adobe be providing a camera raw update to enable elements 9 to read raw from the new canon G1x
View 3 Replies
View Related
