CorelDRAW X5 :: Matrix Of Labels - Only Single Label On Print Preview
Aug 20, 2012
I would like to use the label print feature of Corel DRAW X5. When I do the following steps:
Choose File -> New...
Create a new file with A4 size and 300 dpi
Choose Layout -> Page Setup....
Goto "Document" -> "Label" in the options tree
Select "Labels" (instead of "Normal Paper")
Select a predefined label layout (problem exists also with a custom label layout)
Click on OK -> New page with one single label as the size has been created
Drawing my label
Choose File -> Print Preview
I expected to see the "matrix" of labels (e.g. 4x10 labels), but I only see one single label in the middle of the page.
sometimes I need to print some labels with some text and barcode. I just select predefined from (zweckform) in labels menu and design the label. But, when I preview all labels, there is a problem-whole page is out of margins? I can't figure it out since labels are designed to match the page.
I just installed X4 on new computer running Windows 7 Pro 64 bit. Have 16GB of ram. Every time I go to print preview it says that "Corel Draw has stopped working" This is the info on the error.
Additional Information 1: f59c Additional Information 2: f59c4d6813a7cf717ef5028b598f7fc6 Additional Information 3: 6b28 Additional Information 4: 6b281c85a08c194a3521cc563e528
I'm having an issue printing to a Panasonic DP-C322 PS printer. I send my image and ask it to print multiple copies. The result is just a single copy of my image. If I use the PCL driver, the image prints in multiples, as expected.
We are having issues with Corel X6: when we try print preview, the print preview window opens, but after we click print, it just crashes and that's it.
Both corel and Windows are updated, and the machine is clean.
I'm currently working on an XP 32 bit system with AMD Athlon 64 3200+
CorelDraw is displaying a print preview but is otherwise completely idle. It has finished displaying the preview, so it is just waiting for user action but has nothing else to do.
Photopaint in another window was running extruciatingly slow so I checked task manager. CorelDraw.exe was showing to be using 98% of the CPU.
On further investigation, this happens only when the print preview is on the screen. I close the print preview, return to CorelDraw design screen and CPU is 0% when idle. I do another print preview -- 98% CPU again.
I'll try it later on a quad core system, but it seems that print preview should not be hogging the CPU when idle waiting for operator action.
I have a rather large job, a book with 370 pages. when we want to reprint w/o any changes i would like to turn off the print preview to eliminate the delay.
I've been searching for this for over a week & finally thought I'd better go to the experts!
I have a 2 page document that has CMYK on one side and 100% Gayscale (with 2 Grayscaled bitmaps) on the other side. My problem is that when I go to print preview it shows the Grayscale as CMYK Separations. My printer is counting it as color instead of grayscale so we are being charged much more than the grayscale would be. I haven't changed anything in my color profile and actually deleted my ColorSettings.xml and rebooted Corel Draw to reset the color profile default. Still no change.
What I am used to (& what I need) is for the print preview to show my page 1 as CMYK separations and my page 2 as black like it used to. I do a lot of ads and need to be able to determine if there is any color in my document when there shouldn't be.
Problem number 2 is that around my grayscaled bitmaps when my document is printed there are thin black lines showing up where the edge of the photo is. None of which shows up in print preview.
I was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
Just upgraded from X3 to X6. Still getting used to it, but so far so good.
On one layout, some items on a printable layer do not appear on the Print Preview. The page contains a monochrome bitmap, some text and a curve. Only the bitmap appears on the print preview, yet everything prints.
It doesn't happen with every job. Not a big deal on this job, but there will soon come a time when I need to know what will and will not print.
I just installed X5 and I'm opening files from ver 11. It's all opening fine, but when I click on anything, the screen flashes pale blue. When I look at a print preview - it's ALL a blue tint. Can't work with that. I'm running Windows 8.
I am using a vinyl cutter to cut out some roughly A3 sized artwork however when ether I go to print preview the size is reduced to A4. the settings are correct before, its just whenever i go to print preview mode. I have tried multiple settings but no change
I am ready to print my stuff. But I have to manually use the pick tool in the print preview window to move my pages around so that they will print the stuff in the center of the pages.
I do my print run. And then save the "Print style".
Come back the next day and I have to re-do all the adjusting of the work again so that it all gets printed. I would have thought that saving a print style would make it so that next time everything is the same as before.
One of the companies I support is using CorelDraw X3 to create data plates for components to be created using various silk screen and laser etching machines. At the moment, they are hard coding the data into the template. In order to print batches instead of single items, we are trying to assist them in pulling in data from a spreadsheet (most preferred is a .csv file).
I have figured out how to use the Print Merge function to pull in most of the data. The one item that is still eluding me is a 2D matrix, or UID, that needs to be created on the template. This is similar to a linear barcode. I need to pull in the data from the spreadsheet, in this case a single line of text with special characters, but I need it displayed as a 2D matrix.
I believe I read somewhere that barcodes are not supported in X3. Is this true or is there a way to import this data into a barcode format?
Attached is an example of a 2d Matrix and here is a sample of the data string:
[)>0617V192071P9346412S11488
(there's and end of transmission special character on the end that I couldn't get to paste, looks like a superscript backwards L)
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
Is there a way to create a macro to label a line with a particular style?
I label my feature lines with three styles: multiple - segment grade, multiple - segment start elevation & single - segment end elevation. I want to make a macro for each of these that I can put on a button. It would be nice to combine the two multiples too if that is possible.
I'm using Autocad 2004 with LDD. My text style is set to Standard with simplex.shx as my font. When I select add static labels and select a line, the label is gibberish. I have tried different fonts but have the same results, gibberish.
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
I received an Autocad file from another person, opened it with Autocad 2011 LT, and it looks fine. But when I go to print preview all the lines are very thick, making the detail of the drawing difficult to see. I've tried manually changing the lineweights but it has no effect on some of the layers. Is there an easier way to fix this other than recreating layers?
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
It seems that trying to print a photo with Description and Labels being checked in the Output section will not happen. why this function will not work in my recent upgrade to CS5 (version 12.0 x64)?