CorelDRAW X5 :: Importing EPS Files (Containing Text)
Apr 29, 2010
I've recently upgraded to Corel Draw X5 having used many previous versions (back to Corel 6) but i'm having a few issues when importing .EPS files.
I normally do a design in AutoCAD, then export to .eps, then import into Corel.
Im finding an issue though, when I import an EPS that contains text, the middle section of the text will not combine and fill correctly.
For example, if I were to import a letter "Q" when I then combine the outer section to the middle section in previous versions the letter would appear normally, with a "Hollow" inner section. However, in X5, I combine the letter and the inner section does not combine with the outer section, leaving me with a solid black symbol, with the outline of a letter "Q" but no centre piece to define the actual character.
View 7 Replies
ADVERTISEMENT
Nov 27, 2013
Im trying to import an EPS file in my Corel X5. Im note sure why it is not working but my first question is if there is any update that can handle postscript 3.1.
View 9 Replies
View Related
Oct 31, 2011
I work exclusively in coreldraw x4 but am need someone who works in illustrator, which means they need to be able to open my files, work on them, send them back and then i need to be able to open them in x4. don't care what file types are involved as long as i end up back with a .cdr file that still has all the important info like groups, font details, accurate cmyk values, lenses, pattern fills and gradient fills intact. etc.
since i also have illustrator on my machine i thought i'd do some tests to see if this works and here's what i've found:
1. cdr files saved as ai seem to open perfectly in ai with the exception of color changes in pattern fills. (they look essentially the same but CMYK values are oddly different.) they stay in the altered cmyk values coming back into corel.
2. coming back to corel some teeny tiny amount of info just plain disappears (in this case, some outlines)
i've tried bring it in as a pdf file and ai (and yes, importing both times) but still the issues.
View 14 Replies
View Related
May 24, 2013
I downloaded the Corel Designer Suite X6 trial version yesterday. The downloading and the installation course ran problem free. The installation was finished successfully The programs were installed on Windows 7- 64 bit platform. After the installation I started to work with the Designer X6 and it was running correctly. I tried to import a 3D dwg. file into a new blank drawing and Corel started up XVL Studio program.
I tried to import one of my existing dwg. 2013 file in the XVL but during the process an error occurred. I tried again with different versions dwg and dxf files but XVL just couldn't import the files and I always was given the same messages. "Unable to import ... file". I'd like to insert my existing 3D drawing as vector graphic in Corel in order to editing technical illustration.
View 7 Replies
View Related
Dec 1, 2012
I have a Student and Home version of X6, and for the life of me I cannot import an existing DXF file. Is there a way to do this or am I out of luck.
View 1 Replies
View Related
Apr 25, 2011
I occasionally have customers bring in .ai file for me to open in x4. I am unable to do so. I have read about opening in Adobe reader and exporting as PDF. I have no other software to open this. I have tried importing selecting files of type .ai .
View 3 Replies
View Related
Mar 13, 2013
I have several Kodak Photos CD - some of the Corel Professional Photos, but X6 seems to have dropped the PCD filter.
View 3 Replies
View Related
Mar 6, 2013
Recently purchased a new plotter thats 32 bit. Problem is, my Win 7 is 64 bit, holy smokes! so the two wont work together.I cannot even download the plotters installation process. Was told that Corel Draw can bridge the two correctly so I am leaving Letter Art and joining the Corel Draw family. I have a few questions concerning this matter. First, can Corel actually bridge these two? Second, Letter Art saves their files as gnt, showing up in My Documents as sym (go figure) so knowing that Corel can import all types of files, can they import pcx, sym and/ or gnt as well?
View 4 Replies
View Related
Jul 21, 2011
I am moving over from CorelDraw 12 to Xara Designer pro but have lots of file I would like to import into Xara Designer.
I have tried varios methods but cannot get it right - is it possible to import files & layers from CorelDraw 12 on Xara Designer?
View 4 Replies
View Related
Apr 23, 2012
I've taken over the spot as art person, and to put it nicely I don't know what I'm doing. I'm not sure if I did it or another person who has been on the program. but now when I am accepting files PDF CDR from other people I am no longer recieving the option to import as text or curves. It is automatically importing them as curves. Which is all fine and dandy for fonts I do not have but it leaves me unable to edit the text as needed without having to redo all the text for the fonts I do have.
Where can I find the option to make that option re-pop up when I am importing stuff?
View 8 Replies
View Related
Oct 28, 2013
having a problem with x6 importing Eps as text or curves X6 is a nightmare. have made eps files from pdfs imports fine in x5 opens in illustrator cs6. The files re distill to pdf in acrobat no problem. used corel since windows 286 have finally given up, due to font handling change and plugin issues. on to cs6.
View 14 Replies
View Related
Jun 19, 2012
I'm having 2 seperate import problems in Coreldraw X5 in Windows 7. The first one, and the one I need to fix immediatly is, every time I try to import a dfx file, the program crashes. The other which is less important right now is, a lot of times when I try to import PDF's I get an error message that says the file is corrupt.
View 2 Replies
View Related
Apr 5, 2011
I'm having size problems after importing and changing files. Look at this print screen, how this 2.73 mb Photo sizes up to more than 15 Mb without me doing anything?
I used to work with X3 but after updating to X5, this problem turned up.
View 3 Replies
View Related
Jun 2, 2013
I'm having trouble importing RAW (.CR2) files taken with my Canon T1i into PhotoPaint X4. I am able to do it successfully with my NikonD90, but when I import from the Canon, the image is all purple and black. I just downloaded and installed the latest Canon RAW codec.
I don't know what other info to provide.
View 3 Replies
View Related
Feb 12, 2012
When I import a pdf file the program tries to interpret the special characters as some control function. the script over write for a few characters after a dash.Do I need to have the originator save in a different format or do I have to select a special font to convert it to?
View 6 Replies
View Related
Jan 23, 2013
i upgraded to CS6 photoshop and now i am having problems with multichannel photoshop files not importing correctly into CorelDraw x6. Either no channels appear at all or some will be missing or misnamed.
i realize that X6 may not have the latest and greatest import filters for the latest in Adobe products.
i have even saved the psd files as rgb and grayscale, hoping the issue was just multixhannel but that did not work.
View 5 Replies
View Related
Jun 2, 2012
Last week I opened some .eps files into coreldraw 12 without any hitch. But two days later I am unable to open or import any of the eps files. I am unable to find out what is the problem. The files I opened and worked on earlier are now opening as static bmp files or they are just opening as a grey square with adobe illustrator written on it. I tried selected both (eps) and (ps, prn, eps ) from the file type while importing. Also I kept the sort type at default. But still it keeps giving me the invalid file type error.
View 5 Replies
View Related
Feb 12, 2013
I need to import DXF files to Corel, but when I import them, the text appear as paragraph text, not as artistic text...that's not a problem if the paragraph text includes all the text...but it do not do that. Some texts appears as paragraph with red lines (so it is not possible to see it, as well as not possible to convert directly to artistic with Ctrl+F8). Also, some paragraph text appear as 2 lines instead of just one, because it do not feed in wide but yes in height.
I would like to import the text directly as artistic...or as paragraph,but with the same appearance of the original DXF file.
View 15 Replies
View Related
May 21, 2013
I use autocad (version 2002) to draw 2D drawings which I then engrave with a rabbit laser engraving unit (model RL-60-9060). The problem I have been experiencing is that in order to engrave these files I have to save my .dwg's as .dxf's which I then import into a program called (laser systems 5.3) when I import these files everything looks fine except for the text which is shifted (only in certain random areas and always to the right) I then have to look at the file very closely and move the text back where it should be, often missing something which makes me have to go through hours of sanding my metal down and repainting it before I can try again. Ive been told that I need to explode the text in autocad to correct the issue, however I have had no success doing this.
View 1 Replies
View Related
Aug 1, 2013
I would like to know if there is a way to match or import text from a file without doing the whole "double click, highlight, right click, import text, select folder, select text file" . Kind of how you Matchprop command when you select what you want to match. Maybe have it match from ToolPalettes? Or maybe an IMPORTTEXT lisp that you just have to type in the name of the file you want to bring in.
Example ... we have a 1632PNC screw that reads:
#14 X 4" HWH TEK III,
@ EACH SUPPORT
[1632PNC]
So lets say we want to change it to be a 3" and 1616PNC I would tell it to bring in the imported text from a folder where I have text files and pick the one that reads:
#14 X 3" HWH TEK III,
@ EACH SUPPORT
[1616PNC]
View 0 Replies
View Related
Sep 22, 2012
I want to import 10 photographs - jpg files and insert it into 10 separate/individual pages of documents automatically. Can I do this with import.
View 7 Replies
View Related
Jan 18, 2013
After using Camera Raw Lab for .NEF files, photopaint seems to be incapable of exporting the file to a jpg file without extra fiddling.
I can export after I convert the file to RGB mode, but I want to understand why I cannot export as a jpg without doing that...?
View 11 Replies
View Related
Apr 24, 2013
Have an issue when importing pdf files into both X5 and X6. Fonts have been converted to outline and without Ghost script installed overlapping vectors fill in with white! With Ghost script installed center of fonts like e,b,p etc fill in with font color. Convert to eps prior to importing still has the issue? Also had some objects reposition on import but fixed if converted to eps? Processing a lot of client files for output to image so this is a real problem.
View 2 Replies
View Related
Jul 21, 2011
I have some old .ppf files which are teaching Slides like a Powerpoint type thing, each file I have has 15-20 pages in and they seem to open in Corel Draw no problem and I have been able to Ungroup also no Problem. But not sure how to put each slide on a separate page (automatically if Possible if not Manually)
Then I want to re-save as a more modern File that I can open or import to Powerpoint ..
I would Imagine that does not matter that they are a .ppf files as would be the same importing any multipage doc .
View 11 Replies
View Related
Aug 25, 2011
having trouble importing pdf files into corel, it keeps telling me there is an internal filter error.
View 2 Replies
View Related
Mar 4, 2011
I have been trying really hard now and this has ocurred several times before for me: I copy a text from MS Word and paste it into a Paragraph text frame in Corel Draw, and all I get is a line break. That's correct, just one line break, no text.
If I take just a few hundred words it pastes allright, but if I have like 14 000 characters including spaces, it fails to paste. If I paste the same amount of text into Notepad and then from there to Draw, it works alright. There seems to be a problem importing/pasting formatted text, even if you discard all fonts and formatting in the Paste text dialog.
If I go to Edit/Paste special/Text the import works, but the text does not land in the text frame selected or where you have the cursor active, instead you get the text in some randomly fomed text frames where you most likely don't want them, many times just as big as the page and with no margins.
So there definitely seems to be a problem pasting longer texts into Corel Draw.
View 12 Replies
View Related
Dec 12, 2012
I am getting an error "Unrecoverable Error" when I try to import a .dxf from Autodesk Inventor. I have tried saving as different versions of .dxf with the same results. I am using Version 16.2.0.998 of Corel Draw X6
View 14 Replies
View Related
May 18, 2012
I frequently require mathematical symbols such as ≤ or ≥, which are easy enough to insert as unicode characters and supported by common fonts such as Arial.
However, when I try to import text containing such characters, such as within an Excel table, they just import as "?" instead. I've tried pasting Excel table in various formats. As an Excel object or a Metafile the overall formatting is retained correctly but the symbols become question marks. Enhanced Metafile preserves the symbols but alters the fonts so that the text no longer fits within the cell, ruining the layout.
I've also noticed that when I manually insert unicode symbols using the text tool in CorelDraw X6 it changes the font to Adobe Fangsong Std R (which looks awful). If I try to change the font after the fact, everything changes except the symbols. Highlighting the symbols also looks different: rounded highlight rectangle versus normal rectangle for ordinary text. It seems CorelDraw refuses to treat these symbols as ordinary unicode text forcing them instead into this horrible wirey font instead.
I also have issues try to export from CorelDraw to say Powerpoint where Corel will automatically format some text as ligatures but when exporting these just show up as "?" in Powerpoint.
1) Is there any way to get CorelDraw X6 to reliably import and export text, including unicode symbols, without messing up the formatting/layout.
2) is there any way to get CorelDraw not to change the font of symbols?
View 5 Replies
View Related
Aug 31, 2012
I just installed Corel 13 to my new computer, but it isn't recognizing the text in any of the files from my previous computer. Granted, the files on my previous computer were in an older version of Corel, but that shouldn't be an issue. I can add text to a new document, but even when importing a pdf, the text in the file disappears.
If you drag to select the area where the text should be, it recognizes that something is there. However, you can't see anything or do anything with it. I ran the repair on the installation CD, but I am still having the same problem.
View 3 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
May 30, 2013
I have a batch of igs and stp files that I have to import into max and on some of them I am getting this strange issue where its almost like the boolean operation has failed and where there should be a piece cut out I am getting an extra piece of geometry in the shape of the cutout.
The image will make more sense, as you can see I am getting these extra tubes rather than the groove that should be there.
I am using Max 2014.
View 3 Replies
View Related
