I am working on a quite large file. It was all of the time around 68 MB. Now at once it is 570 MB in size. I linked all images (less than 380 MB) externally. What is the reason for that?
View 6 RepliesHow do I get it to get bigger as it goes outward? I see up top where it says "spiral expansion factor" but it is light gray so I can't use it.
View 14 Replies View RelatedI receive an artwork from my customer to print a small label to cover some wrong printing.
The label is 110x160mm and the file size is 15MB.
So I intersect a small part of 4x40mm for the replacement label.When I save it as a new file, the filesize is 10MB!
I wonder why the small piece of artwork is so big, while it only contains a 4x40mm bitmap of 300dpi and the rest are vector.
[URL]....
I prepare an A0 size poster and with the vector graphics it is about 5 MB in size. When I started to insert a photos it reaches 50 MB. I carefully prepared my photos but for each 1.5 MB inserted image the size of the cdr file increases with about 7 MB.
You know, Corel hardly works with files bigger than 50 MB. I inserted 6 photographs 1.5 MB each of them but my cdr file became 50 MB and the program stopped working with it.
I have upgraded to X5 from X3 , and now when i Export EPS files, they are MASSIVE, I work in a company that does signs, and car vinyls and other graphics /vector related work, and It is important that i use EPS as file format for out " plotter" but a size of 800 mb and 2,2 GB now when it used to be 10 mb is insane.
I also use POSTSCRIPT 2, as 3, makes the file over 2 GBs.
I have a number of files which were prepared in Corel Draw which I would like to post online. The designer has supplied the PDF versions of these files, however, the files sizes are too large for web usage. A 8 pg document is 5Mb. I have tried reducing the sizes by compressing in Acrobat; importing the PDFs into Corel Draw and re-creating PDF files with reduced resolution; recreating the PDF without the bitmap images (there are about 10 images)..yet the file size of the PDF does not change significantly.
What else can I do to reduce the file size of the generated PDF files? The files are newsletters, so most of the content is text and a few shapes and lines.
How to tell the file size of an image when in corel?
I have some big files that slow the computer down when working on them. Can I some how tell how big a picture is within corel draw.. ie It would be nice to be able to right click on a picture that I have imported into the workspace and it show me how many mega bytes it is.
Then I can go through my files and delete the larger pcs and make them smaller.
As it is now, I have to pretty much delete them all and start again to find dthe few pics that are like 3-5mb in size.
I prepared my drawing for size A0 (841 mm / 1189 mm) but when exporting it in Jpg or Tiff format for printing, it happens something very strange. In the dialogue window it doesn't allow a bigger size than A1 (594 mm / 841 mm). It shows me 74 % for width and height parameters. I try to change it to 100 % but it turns back to 74. Now I cannot print it because I need the bigger size.
View 9 Replies View Relatedi make a design in coreldraw x5 and export to pdf but i don't know the seeting how i compress pdf file size...so then its size is too large.
View 1 Replies View RelatedA .cmx file produced by CorelDRAW x5 can be opened / imported / edited in any previous version of CorelDRAW? Why size changes? When I export to .cmx size doubles. If I use the option "Save as ... cmx" the file size decreases. What´s the difference? URL.....
View 6 Replies View RelatedHow do i program my corel photo paint to compress large jpeg photo file to a smaller size and save into another folder.
View 5 Replies View RelatedWe are working on a DWG file. Its a project my friend started and is of a house. She now started to bring in furniture from external files. Now her original DWG file is really big. Even if she deletes the furniture she brought in from external files, the original file is still bigger than it was.
I asked her if she could just copy the original 3D house to a new file. She said in a later version of AutoCad, she could just create BOX and save the objects to a new file, but she isn't sure how to do this in AutoCad 2012.
In Short: Is there a way to save her project? She can't even work on it now because the file is so big.
my .oam files getting bigger...i had a little animation that was 1.9mb and 1 month later i make the same animation and i' m getting a 2,9mb file.Not much, but this .oam file is part of a website...so size das matter..
Is there a way, to get smaller sizes? the files are alrready based on the animation size..the animation is 960x320pixels..and i made the pictures 100% based on that measurements..
Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies View RelatedI have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies View RelatedI not remember where is that!
Would be nice able to change the color or shape too!
No matter what size doc I create when I go to print it only shows letter size. Tried re-saving, changed page layout, etc. with no luck. If I press print I get a page size missmatch error.
View 7 Replies View RelatedI just upgraded to x5 and can no longer export a file as an eps and hold the custom page size. In x4 I could export as an eps to a custom page size of 2.5" by 2.5". Every time I try to upload the file it is seeing it as an 8.5' by 11". I am selecting page size in advanced tab
View 8 Replies View RelatedI am having a problem with cutting the size of text that I want. On the main working screen I type in the specific dimensions of the text that I want to cut ( I have a graphtec cutter). When I pull up "Cut/Plot" in the dialog box under Job Size....the size is NEVER what I have specified. It is normally smaller.I will then type the dimensions into the Job Size field and cut the letter. BUT when I cut the letter......it is not the size I typed into the job size.
View 9 Replies View RelatedI had made a billboard design( 12 feet x 6feet) and how to see that in actual size,
View 5 Replies View RelatedI am running CorelDrawx6 on Win7, 8G Memory, 2TB Storage, Core I5 processor and NVIDIA GeForce GT 440
Graphics card with 1G onboard memory. I have the latest updates to CorelDrawx6 installed (x6.1 and x6.2).
I am now having trouble with fonts in all of my cdr files. Many of the fonts will default to size .001 and cannot make them stay at any other size. When I scale them manually, I can see them flash on the screen at the proper size, but when I "let go" of them they reduce back down to the invisible size.
I would like to know the default font height setting in coreldraw 12. I want font size in millimeter rather than pt.
View 1 Replies View RelatedWhen I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies View Related[ Bug ] Exporting to .GIF does not keep its original sizeThe checkbox 'Maintain Size' checked.
Result: importing that .GIF is 5 time size bigger.
My default paper size in coreldraw is letter. I have to manually set it to a4 everytime i need to work. can i preset it to a4. how?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I am currently preparing a brochure and need to have one page (of six) in DIN A3 instead of A4 like the others. But I find no possibility to change just the page I need into A3.
View 2 Replies View RelatedI can't get the box to pop up where I can set the default size because I think I checked the box to not show it again. How to get it back?
View 4 Replies View Relatedwe have just upgraded to x5 and now i have a big problem exporting tiff:
I work for print,not web. lets say i have a 50x50 cm layout. default dpi of document is set at 300. if i want to export that as a tif, it defaults at 300dpi in the export dialogue. until now, in x4, if i checked the maintain aspect ratio and just changed the dpi to lets say, 150dpi, it would only change the % of the size, not the actual size of the tif! now it changes somehow to double the size! but i want the same size to remain! also cm is selected, so no reason for it to keep the number of pixels!. i have to uncheck the maintain aspect and recheck it again to put the correct value in the size.
Also, i work with big documents, is there a way to stop previewing the jpegs in the export as jpg dialogue?
I am making a booklet up. I have set the workspace paper size to A5 landscape. And set to booklet and facing pages, great, that is a whole lot of hassle dealt with.
But,
I make up my design, looks good on the screen. Export to pdf and print it off and it is printing one page of my work on a single page of A4 paper full size. i.e. I need it printed onto A4 paper in landscape so that I have a left page and a right page, that I can fold in half. But it is just printing like normal.
What do I have to do to get it two print two pages of information onto a single A4 landscape rotated piece of paper?