Is there a way to clean up an old newspaper picture in corel?
I'm not that good working with images i'm more of a vector man but I have been playing around with it but the results are not great.
The image itself is a typical grayscale newspaper image with halftoning and its gone a bit yellow over the years, all I want to do is get rid of the yellow and brighten it up a bit.
sample1.cdr
I have attached a file, I need to clean up and populate with objects: room names, furniture and etc. This file will contain the object library as well.
I'm using CorelDRAW Graphics Suite X3
It should be.
a. Clean up: If you zoom in 800% this file you will see the corners have spikes. They are not clean.The best way to check it is to extract to a pdf file and check it.
1. Select a piece of a wall. Press "No outline" button. Done. CorelDraw will squeeze a wall a little bit and remove all rubish. The floor plan will still be ok.
Is there a way to clean (or parcial delete) files in "FILE > OPEN RECENT" history?
[URL]
I have a picture of a dog I am trying to print on my dtg printer, but when I import it there is a box around the dog. When I enable the white to print underneath the dog I get the box (which is all white, then the dog prints on top). How do I remove the box and just have the dogs picture?
View 2 Replies View RelatedI'm pretty new to photo editing. I need to blur faces in a picture so nobody gets recognized.
I have CorelDraw Graphic Suites X5.
I have Corel 15. I want to take a picture and make it gradually go transparent from the middle of the picture to the top (using Photo Paint I guess), you know the thing with the checkerboard squares. Then I will put it in Draw and overlay some text across the top area where it has gradually gone transparent.
I do not want a sharp line between regular and transparent as if I cut a hole in the background and deleted the hole part. I want a gradual fade sort of transparency for the entire image. I have searched the internet for how to do this even using using Photoshop and there are not instructions available.
When I export my work to .jpg format all is OK. All looks fine on desktop. But when I try to print it there are several dark pixels allover the picture. It looks like snow or TV noise. I tried different picture fixing programs, but nothing... How can I remove that noise?
View 4 Replies View RelatedHow do i spread a picture over two pages in booklet. Options, Layout facing pages has been set already.
The booklet is A5 size that is A4 folded.
I imported a digital picture into a CorelDraw document--it looks great in the document. When I converted it to a PDF, the picture quality looks terrible.
View 4 Replies View RelatedI have the Corel Draw X5 and I can not power clip a picture. I clicked on the bezier tool and traced the image. I went to power clip and when I clicked on the line I just made with the black arrow it says , the object I selected is invalid.
View 14 Replies View RelatedI need to create a gold bar in the shape of the map of Texas that looks 3D. I need it to look real. I have a pic of a gold bar with the embossed 999.9 and the serial number. I have taken an outline of the map and extruded it so it looks 3D. I cannot figure out how to fill the extrusion with the bitmap. I want to wrap it so it looks like real gold on the front and sides with embossing undistorted. I am using Draw X4.
View 12 Replies View RelatedI recently have been able to export jpgs into my pictures folder from Coreldraw but now can't. I don't know where they go? I can see my cdr file in the folder but it wont show my jpg file.
View 5 Replies View RelatedIs there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
I'm looking to were in elelment 11 to convert a newspaper clipping to a JPEG picture.
View 1 Replies View RelatedI hope I can get this explained where it can be understood. I create and box with an outline of 4pt's. Then I want to snap the outline to the very edge of the outline and the guide, but it does not work this way. when the box snapped to the guide it goes to the middle of the outline. How to get this corrected or changed?
View 2 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedClient supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.