CorelCAD :: Setting A Drawing Scale
Dec 3, 2013
I want to create a scaled drawing. I make geologic cross sections with drill holes that are 500 to 1000' deep. I would like to set the drawing scale to something like 1"=250'. So a 1000 foot drill hole would be a line 4 inches long on the screen. I have gone to the Drawing Scale List and figured out how to create a new scale, but nothing I try allows me to change the drawing scale from 1:1. I can edit the list, but I can't change the 1:1 default.
I have tried right clicking, double clicking etc. It seems that the drawing area stays at the original 1:1 scale. What am I doing wrong? I want to make a drawing where I can give the Line command the coordinates 250,0 and it draws a vertical line 1 inch long.
View 7 Replies
ADVERTISEMENT
Mar 16, 2012
IN this drawing, I want the 9.00 to be either 4 ( feet) or 48 (inches).
How do I set the correct scale in this or any drawing?
View 3 Replies
View Related
Jun 2, 2013
I am new to corelcad. In fact, I am looking at the trial to make my buying decision.
I have installed the trial of corelcad2013 and have opened a autocad lt file from autocad lt 2002 (I guess).
I see a black model page.
When I select all (ctrl+A) I see all elements selected.
Any way to get them visible?
View 8 Replies
View Related
Jun 27, 2013
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
View 4 Replies
View Related
May 9, 2011
This is not a 2012 problem it happened to me with other 3ds max version, well my problem is im working with unit scale in meters, so when it comes with small geometry it disappear when i zoom in which made dealing with small details are hard to model and to see.
View 5 Replies
View Related
Jul 8, 2004
I am having some problems getting the hang of applying the drawing scale to my assignment. I understand the scale factor that is applicable to the printing only and that AutoCAD doesn't care about the units used...but something is not clicking here and I'm sure it is pretty simple. My assignment requires me to draw 3 simple structures at 1/8" scale on 11X17 paper. Each house is 20' long with 10' walls and each is done in absolute, relative, and polar. I actually completed the work with all 3 formats without specifying the scale or paper size, just to get familiar with the commands. But now that I am trying to set the dimensions correctly, I cannot replicate my work because I'm getting lost in the way things are defined. I am using AutoCAD 2005, also have a 2002 version to which I can defer.
View 9 Replies
View Related
Sep 2, 2012
I am rebuilding the entire back porch.
I would like to set the scale so i can visually see where my joists , hangers , tiers, etc go.
How do i set an accurate scale for a drawing such as this?
Setting Scale .porch.dwg
THIS DRAFT is most certainly NOT TO SCALE.
As usual, i am NOT sure i am asking the right question.
I am trying to use the smallest of the squares in GRID to equal "X" amount of inches so the entire drawing will fit. I do NOT need to use grid if it there is an easier way. No contractor...I am the only one using this and its just to make my initial materials list and get a picture of how things will go....
View 8 Replies
View Related
Apr 9, 2012
Is there a way to print out the exact scale just like using manual printing or I just can use
// a 1 inch: 2 units scaleacPlSetVdr.SetStdScale(acPlSet, 0.5);// a 2 inches: 1 unit scaleacPlSetVdr.SetStdScale(acPlSet, 2);
By the way, setting for example (acPlSetVdr.SetStdScale(acPlSet, 2.04);
I get eInvalidInput error.
View 1 Replies
View Related
Aug 28, 2012
There are several ways a user can set the scale of a paper space layout viewport.
Properties palette.
ViewportScale_Properties.PNG
Quick Properties.
ViewportScale_Quick.PNG
From the Taskbar. You'll find this in the lower right-hand corner of your screen.
ViewportScale_Taskbar.PNG
Via the Viewport Toolbar.
ViewportScale_Toolbar.PNG
Or manually using the Zoom > Scale > nXP option at the Command line. This method requires the user to enter a scale factor.
For a list of frequently used scale factors, both imperial and metric, refer to this thread. [URL] .......
View 0 Replies
View Related
Feb 19, 2005
I can read a view scale with:
BaseViewScale = oDoc.Sheets.Item(1).DrawingViews.Item(1).Scale
But When I try to use the following line to change the scale, I get a compile error.
oDoc.Sheets.Item(1).DrawingViews.Item(1).Scale = BaseViewScale
What type of variable should BaseViewScale be (single, double, string)?Inventor Routed Systems 2010.
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
View 8 Replies
View Related
Sep 26, 2013
Just wondering what the best way is to set-up my units and scale preferences in 3dsmax. I would like to have my units in mm or cm so that when I import an object with known and precise measurements, it will stay consistent in 3ds max. So that I can visualize the objects in the correct scale and make measurements with the right numbers.
Of course I dont want to mess with results ofmy textures, animation, camera and anything else in 3ds max and would want to have everything behave normally if my units were in cm or mm in stead of the default.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
View 5 Replies
View Related
Nov 25, 2009
My viewport scale list only has metric and I would like to add a list of imperial scales for general use. So far I can only add, through Annotation Scaling panel and Scale list for an individual drawing so once it is closed I lose the scales.
how do I list my imperial scales permanently for use throughout the program.
I'm on Autocad 2010.
View 7 Replies
View Related
Apr 18, 2012
When setting the viewport scale how do I know if I'm scaling to an A3 plot or A1 etc.
View 9 Replies
View Related
Jan 16, 2012
Trying to set the scaling of bitmap images and the scaling is stuck in in(chess). As I am working in metric with everything set to metric why is in still in imperial and can this be changed via a setting?
And what happened to the 'fit to gismo' setting? How are you supposed to do this now?
View 3 Replies
View Related
Sep 25, 2013
How to set the view port scale setting in autocad civil 3d i need to print using plan production template.
View 1 Replies
View Related
Sep 17, 2012
I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies
View Related
Sep 24, 2009
I am using version B.219.3 (UNICODE) of Autocad Civil3d 2008 with service pack 2 loaded.
I am putting together some plan and profile sheets for a civil roadway job.
The annotation scale setting of the text in the profile xref and alignment xref is being ignored in the sheet file viewports. This text should be appearing at 1:40 scale, automatically, same as the viewport scale, but they are appearing very small instead. According to the way annotation scale is supposed to work in Autocad2008, this annotation should be appearing at the correct scale, automatically.
If I try to adjust the annotation scale to a ratio I think will work, it automatically adjusts the viewport scale to match whatever I enter for an annotation scale. What to try next.
Can files become corrupted in AutoCAD? If so, are there utilities to repair corrupt AutoCAD files?
View 7 Replies
View Related
May 29, 2013
AutoCAD to draw various drawings, my issue to set scale.
1. what are the procedures of setting scale in modal space? say if is 1:1 then how to make 1:2 or how to recognize if someone has set a scale say 1:20 in modal space so that you return it to 1:1?....( here i need the procedures)
2. what is different among the following, one using mm, another using cm and the third one using m when drawing in modal space, do these people face different if they decide to use the same scale in layout to print? say if they us 1:50xp, what will happen, in their output.
View 2 Replies
View Related
Feb 9, 2012
I have imported a ISO Shipping container but the scale is to large. How can I scale it down to architecture setting standard not metric. When I try to use the scale option all it does is makes it larger? I have not search yet do to time restrictions.
View 4 Replies
View Related
Mar 1, 2012
SUBJECT: Annotative Scales.
I have a drawing with a 2 viewing ports
Port 1 is at 1/4"= 1'-0"
Port 2 is at 1/2"= 1'-0"
What should my Annotative setting be in model Space?
View 9 Replies
View Related
Jul 18, 2013
I set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !
View 9 Replies
View Related
Aug 29, 2012
I have a problem that I cannot seem to solve. I have a drawings with a whole bunch of layout tabs that have a few viewports in each tab. One of these viewports on each layout tab is on the layer VIEWPORT. I did this so it would be easy to filter out the other viewports in the drawings. I am using the code below to change all of the viewports with the layer VIEWPORT to the Custom Scale 0.020833. This works for all of the layout tabs except the first tab. It will not for some odd reason work on the fist tab.
(setq vieportfilter (list (cons 0 "VIEWPORT")))
(setq ssetvp (ssget "x" vieportfilter))
(setq cntrp 0)
(while (< cntrp (sslength ssetvp))
[code]..........
View 1 Replies
View Related
Aug 15, 2012
Setting the scale in a view port in paper space? 2010
View 3 Replies
View Related
Jul 25, 2012
I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies
View Related
Oct 18, 2013
calculation a viewport scale of 1"=30'.
I've looked around and only find nearly what I looking for. For 1"=20' I have a value of 0.004167 Paper Units = 1 Drawing Units, but what is the formula to calculate 1/30"=1'-0"?
View 7 Replies
View Related
Jul 23, 2009
Currently in AutoCAD 2008, evertime I browse my folders and dbl click a dwg - AutoCAD opens that drawing in a new window. If I click on three drawings, AutoCAD has three different AutoCAD programs running.
If I'm inside AutoCAD and choose File, Open, etc... then the new drawing opens in the same AutoCAD program. I'd like for that behavior to work if I have AutoCAD already open and I browse my server thru explorer and dbl click a dwg on the server.
Is there a setting that will allow that?
View 9 Replies
View Related
Nov 9, 2012
I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
View 3 Replies
View Related
Sep 22, 2011
What system variable changes the Drawing Units Precision?
View 5 Replies
View Related
Oct 5, 2011
We are having trouble setting up a drawing in Feet & inches. Up until now all we have been drawing in metric.
View 5 Replies
View Related
Oct 28, 2013
I am working on a drawing I have been sent by a consultant and having difficulties setting up the vport extents I need when using two vports. If I marquee zoom to what I want in one viewport it reverts to full extents as soon as I click on the other vport. I never had this before. Is there an obvious solution?
View 1 Replies
View Related
Jan 16, 2013
mirrorclip.JPG
Just thought I'd share some stuff that can be done with CorelCAD.
Under export, you can export a STL or STereo Lithography file. These files can be sent to a 3D printer. Sometimes, when things around the house break or go missing, a quick measure with a caliper and some fast CAD work - then a half-hour or so in the printer will produce a new part.
CorelCAD is quite useful for that kind of work.
Here's some stuff I've done with CorelCAD and an UP 3D Mini printer, which makes parts in ABS plastic - and they are quite strong... So it's great to build stuff.
First project: A clip to stop my mirror wobbling. Took about 8 minutes to design and about 8 to print.
View 9 Replies
View Related
