After you rotate single color object you get object with 2 colors on it.
Alot of darker lines appear on rotated block.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I'm trying to rotate a small object in Paint. When I use the rotate toolbar to enter the angle I need, the object rotates just like I want. Then I hit the apply button and some pretty heavy handed anti-aliasing is applied and the object is essentially destroyed. I've been using Paint for quite a long time so I figured there must be an option to turn this off. I can't find one. I even added the anti-aliasing button to the rotate toolbar and turned it off but that doesn't make any difference.
Essentially, what I want when I rotate an object is the chunky, pixelated preview, not the final anti-aliased so much you can't tell what it even is anymore final product.
At this point, I'm going to have to resort to rotating the object and taking a screenshot of the preview and using that instead of the mess that the final result is.
Why combine objects together cut bottom side of combined objects?
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I've just been watching a video about using Smart Objects in Ps and was just wondering if this has any relevance to how we use objects in PP?
View 6 Replies View RelatedI found that Photopaint X6.1 is very unstable when i'm trying to move objects down or up.
Bad news is that its happening after longer period of work like around hour or more, designs with hundred or more objects.
90% of "not responding" errors are caused by moving objects down or up.
With X6 64bit I learned to save files more often than in previous versions.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I have problems with Photopaint Align and distribute. Many times I want to fast select 2 objects and align them and dont want to search them in hundred object list on object docker.
The problem is how to align center white text in blue box? I dont want to move blue box just center text in it. And do not use objects docker to do it.
source file: [URL] ....
System configuration: Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version: X6 VERSION: 16.4.0.1280
combine all objects together in group (you are selecting group and then use combine objects together)
should make:
1. Group with one combined object.
2. One combined object with group name.
In my opinion after such operation as result should be one object not group.
Is it useful to have group after or you prefer object like me?
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I have overlaid star shapes on a colored background, so that you can see the colors inside the star shapes as well as outside the lines of the star shape. the shapes are outlined in a black border. Is there a way I can delete the background (cut out multiple stars) on one sheet and have a white background with the colors still inside the stars?
View 14 Replies View RelatedIn my opinion removing window with paste parameters like size and dpi in X6 was bad decision.
Now I have to remember to make vector objects big enough to avoid pasting them too small in photopaint.
99% of photostock vector files are too small to copy/paste them without resizing.
As webdesigner I can tell that old version of "paste" had better functionality .
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedI can't ungroup objects. This option has been greyed out.
View 10 Replies View RelatedIs there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
If you have several objects grouped, and then you combine them all on a single object, the resulting object is placed inside the same group. This seems bogus, since is not possible to create a group of a single object.
Test case:Create 4 rectangles.Select them all and group them (ctrl+g)Select the group and combine all objects (ctrl+alt+dnarrow)
What I expect:A single object floating on the canvas
What I get:The same group but with a single object inside.
PhotoPaint 16.2.0.998Windows 7 64bits Service Pack 1
I'm not sure if i can explain this properly, but I'll give it a go;
How can I change the color of a picture (jpg) so that the picture is build up in one color only.
I want the effect as shown the pictures below (assuming that the original sky was blue/white-ish)
is it possible to select everything but all white pixels?
View 2 Replies View RelatedI have an image with a "rainbow" (a gradient of 7 colors).
How can I select each and every pixel of that image that contains at least a shade of red? That is, every color whose Red component (from its RGB code) is between 1 and 255.
For Corel PHOTO-PAINT X5
I have a grayscale image (pencil sketch with pencil shading) of a glass object in a CorelDraw document. I'm tired of having to go to Photoshop Elements to edit images in CorelDraw docs, so I opened it in Corel PHOTO-PAINT X5 from within CorelDraw to edit. I want to change the image's 'white' (actually slightly gray) background to a color appearing in the CorelDraw document.
I tried using the Magic Wand to select all of the 'white' background, but the popup says the WAND only selects ADJACENT pixels! Isn't there a way to select ALL pixels of a given color like in Photoshop E. (conitguous/non-contiguous)? If there is a simple way (without the Wand) to change the background color of an image (not of a PP doc!!), I would nevertheless also like to know how to select non-contiguous pixels of a particular color with the wand. Also how to invert a selection. Also, how to select a color in CorelDraw to use as a fill color in PhotoPaint (both X5).
I would like to be able to change my screen color. It opens in white. For a lot of my work it would be easier for me to see what I am doing with a darker screen color. Can I change the screen color from white to a darker color.
View 9 Replies View RelatedI am trying to create a neat desktop wallpaper for my work. I downloaded a JPG that I like alot, but its blue with lines and other slashes, etc through it. I want to change these blue shades to red shades, but its a JPG...
View 9 Replies View RelatedIs there a swap color hotkey in photo paint? I look in customization, din't found any.Is there a way to delete a pixel?
View 2 Replies View RelatedI use the brush to paint. After a while I would like to change the color of that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Snap_2012.04.24_17h42m46s_001.png
I recently calibrated my monitor with a Spyder 4 Express. I process my RAW images in ACDSee Pro, saving them as tiffs - ProPhoto RGB. Yet when I open the same images in PP, skin tones are quite saturated and I'm wondering why? Prior to calibrating my monitor, everything was normal across all my programs, as it is now in ACDSee Pro. But not with PP and OnOne. Something has changed between the programs and I can't see what. I've attached my current Color Management settings from PP.
When modifying bitmap all of a sudden my colors in my standard pallet change to just a few colors. When I try to open another pallet (standard RGB or something else) it won't give me back the colors. I have to save my work and start PP again. Then I can go on.
View 8 Replies View Relatedhow to make a PNG in PP so that there is not a residual trace of the background color. Notice on the picture below. There should be the white circle around the red circle, but then there is also the trace of yellow, which is the background color (and what I chose under PNG Export as the Transparency > Image Color. This has always happened for me using PP and PNGs, and I assume there must be some setting to avoid that so there's a smooth PNG export, but I can't seem to figure it out.
View 3 Replies View RelatedI selected interesting areas of raster using color mask so I have about 300 areas masked. I'd like to change their color (from 100% black to 30% black). How can I fill them all together with new color (not painting them one by one)?
View 2 Replies View RelatedI've got two different color balance problems. The first is where I have two photos that I want to match the lighting in each.
The second is where I have a 'control' and I want another photo or print to 'match' it.
Currently I'm having the second problem. A customer brought in an original painting for us to scan and make holiday cards from. But they also brought in a photo print from a local chain and they have asked me to match the color representation from that print.
It is duller, the blues are purple and it is over all darker. Personally, I think the photo is a horrible representation of the painting. BUT IT IS WHAT THE CUSTOMER WANTS.
I've scanned in both the photo and the original drawing. If I print the photo it matches the color of the scan. (but is the wrong crop size and can't be used for the card.) How do I draw color out of that and get my original to 'match' other than just using my eyes? (which is about impossible for me today) I normally use 'sample/target balance' in corel PhotoPaint, but you can't do that between two layers OR between two files. This would be a great change to make in x7 or an update.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am upgrading some macro code (actually VB.Net code in standalone .Net 3.5 Windows Forms application) from Corel Photo Paint XI to Corel PhotoPaint X5.
My previous CorelScript.BitmapEffect("Replace Colors", "ReplaceColorsEffect.V11 RepClrInColor=5:255:255:255,RepClrOutColor=5:0:0:0,RepClrIgnoreGrayscl=1,RepClrSingleClr=1,RepClrRange=0")
used to replace the white color in a bitmap to black.
This doesn't seem to work in X5. Is there some documentation available on the use of Bitmap Effect?
If I'm using the color mask and i want to know the luminosity of an image can I use it for Luminosity mask?the reason is PP does not have something as Photoshop.
View 12 Replies View Relatedcorel.jpg
I have a problem with the color management of my corel Photo Paint X4.I create Flyer in CMYK and the color management is set as you can see in the attachment.On screen all colors are correct, but when i print something the colors look like it ignores the color management settings for the printer.
When i open the same document in my old Photo Paint 10 with the same color management settingsthe printing has the right colors...
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
removing a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6