I have an image with a "rainbow" (a gradient of 7 colors).
How can I select each and every pixel of that image that contains at least a shade of red? That is, every color whose Red component (from its RGB code) is between 1 and 255.
I have a very simple image, 32-bit CMYK which is just black & white. I want to change all the black to Cyan. Should be easy, I just use rectangle mask to mark out the area I want then go to "Adjust->Replace Colors..." and it comes up with a dialog. So far so good.
I use the color picker to select black as the source I want to change, then I choose the color to change to, either with color picker or manually mixing it to pure Cyan. The colour does change, to something blue-ish or cyan-ish, but not what I specified. Same deal if I try with Magenta. It's close, but not quite.
If I just fill with Cyan, it does indeed come out the right color.
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedIs there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
I'm not sure if i can explain this properly, but I'll give it a go;
How can I change the color of a picture (jpg) so that the picture is build up in one color only.
I want the effect as shown the pictures below (assuming that the original sky was blue/white-ish)
is it possible to select everything but all white pixels?
View 2 Replies View RelatedFor Corel PHOTO-PAINT X5
I have a grayscale image (pencil sketch with pencil shading) of a glass object in a CorelDraw document. I'm tired of having to go to Photoshop Elements to edit images in CorelDraw docs, so I opened it in Corel PHOTO-PAINT X5 from within CorelDraw to edit. I want to change the image's 'white' (actually slightly gray) background to a color appearing in the CorelDraw document.
I tried using the Magic Wand to select all of the 'white' background, but the popup says the WAND only selects ADJACENT pixels! Isn't there a way to select ALL pixels of a given color like in Photoshop E. (conitguous/non-contiguous)? If there is a simple way (without the Wand) to change the background color of an image (not of a PP doc!!), I would nevertheless also like to know how to select non-contiguous pixels of a particular color with the wand. Also how to invert a selection. Also, how to select a color in CorelDraw to use as a fill color in PhotoPaint (both X5).
I would like to be able to change my screen color. It opens in white. For a lot of my work it would be easier for me to see what I am doing with a darker screen color. Can I change the screen color from white to a darker color.
View 9 Replies View RelatedI am trying to create a neat desktop wallpaper for my work. I downloaded a JPG that I like alot, but its blue with lines and other slashes, etc through it. I want to change these blue shades to red shades, but its a JPG...
View 9 Replies View RelatedIs there a swap color hotkey in photo paint? I look in customization, din't found any.Is there a way to delete a pixel?
View 2 Replies View RelatedI use the brush to paint. After a while I would like to change the color of that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Snap_2012.04.24_17h42m46s_001.png
I recently calibrated my monitor with a Spyder 4 Express. I process my RAW images in ACDSee Pro, saving them as tiffs - ProPhoto RGB. Yet when I open the same images in PP, skin tones are quite saturated and I'm wondering why? Prior to calibrating my monitor, everything was normal across all my programs, as it is now in ACDSee Pro. But not with PP and OnOne. Something has changed between the programs and I can't see what. I've attached my current Color Management settings from PP.
When modifying bitmap all of a sudden my colors in my standard pallet change to just a few colors. When I try to open another pallet (standard RGB or something else) it won't give me back the colors. I have to save my work and start PP again. Then I can go on.
View 8 Replies View Relatedhow to make a PNG in PP so that there is not a residual trace of the background color. Notice on the picture below. There should be the white circle around the red circle, but then there is also the trace of yellow, which is the background color (and what I chose under PNG Export as the Transparency > Image Color. This has always happened for me using PP and PNGs, and I assume there must be some setting to avoid that so there's a smooth PNG export, but I can't seem to figure it out.
View 3 Replies View RelatedI selected interesting areas of raster using color mask so I have about 300 areas masked. I'd like to change their color (from 100% black to 30% black). How can I fill them all together with new color (not painting them one by one)?
View 2 Replies View RelatedAfter you rotate single color object you get object with 2 colors on it.
Alot of darker lines appear on rotated block.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I've got two different color balance problems. The first is where I have two photos that I want to match the lighting in each.
The second is where I have a 'control' and I want another photo or print to 'match' it.
Currently I'm having the second problem. A customer brought in an original painting for us to scan and make holiday cards from. But they also brought in a photo print from a local chain and they have asked me to match the color representation from that print.
It is duller, the blues are purple and it is over all darker. Personally, I think the photo is a horrible representation of the painting. BUT IT IS WHAT THE CUSTOMER WANTS.
I've scanned in both the photo and the original drawing. If I print the photo it matches the color of the scan. (but is the wrong crop size and can't be used for the card.) How do I draw color out of that and get my original to 'match' other than just using my eyes? (which is about impossible for me today) I normally use 'sample/target balance' in corel PhotoPaint, but you can't do that between two layers OR between two files. This would be a great change to make in x7 or an update.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am upgrading some macro code (actually VB.Net code in standalone .Net 3.5 Windows Forms application) from Corel Photo Paint XI to Corel PhotoPaint X5.
My previous CorelScript.BitmapEffect("Replace Colors", "ReplaceColorsEffect.V11 RepClrInColor=5:255:255:255,RepClrOutColor=5:0:0:0,RepClrIgnoreGrayscl=1,RepClrSingleClr=1,RepClrRange=0")
used to replace the white color in a bitmap to black.
This doesn't seem to work in X5. Is there some documentation available on the use of Bitmap Effect?
If I'm using the color mask and i want to know the luminosity of an image can I use it for Luminosity mask?the reason is PP does not have something as Photoshop.
View 12 Replies View Relatedcorel.jpg
I have a problem with the color management of my corel Photo Paint X4.I create Flyer in CMYK and the color management is set as you can see in the attachment.On screen all colors are correct, but when i print something the colors look like it ignores the color management settings for the printer.
When i open the same document in my old Photo Paint 10 with the same color management settingsthe printing has the right colors...
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
removing a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I want to know how to resize a photo without loosing quality....... in the image resize box the is a check box that says maintain file size ......what does that do .
I have tried to resize using it and the file stays the same as the original.
I am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
I want to create bulging eyes in a photo that i have. I would do this in photo paint?
View 10 Replies View RelatedIn a photo, I cut out an elliptical or round face.I saved the cutt image as .; "New from clipboard" No problem, the background is now transparent.
But now I want to make the edges of the oval or round image transparent.(then I want to put the result image on another image)
How can I make the edges transparent with Corel Photo Paint (or Corel Draw)?
The current crop of photo sharing apps like Instagram have made filter effects a popular way of adding some extra vim to your shots. What if you want to give the ‘retro’ look to photos that aren’t on your phone though?
How can we create retro looking photos in PhotoPaint?
Is this possible to do in photo paint and is there any tutorials on it?
View 12 Replies View RelatedAs a service, I am setting up some photos that will be exported as png files for use in Publisher.
I need grungy photo edges to be transparent so her background shows through the grunge effect.
Thought I knew how to do this but it's not working.
I would like to use a photo frame from connect, and keep it in the Effects>Creative>Frame menu of frames. I have downloaded and clicked and dragged the frame to my image, but I would like to reuse this frame. Is it possible to add it to the menu? I can download it to the menu - but it is a temporary item in the list of views to the right, which can be replaced from any of the permanent members of the dropdown selection of frames on the left of the Frame menu. I would like a frame to become one of those "permanent frames."
View 1 Replies View RelatedHow to alter a scanned newspaper photo to get it to look like a continuous line photo using cpp apps? is there a tried technique? i tried tracing in cdgs but it looks like the dabble app was applied in cpp i want to try and get rid of the 65 line printing ink dots. if no one has a way, i will post one if i am successful. trial and error can be fun if you have the patience and fortitude.
View 11 Replies View Related
