I am trying to create a neat desktop wallpaper for my work. I downloaded a JPG that I like alot, but its blue with lines and other slashes, etc through it. I want to change these blue shades to red shades, but its a JPG...
View 9 RepliesI use the brush to paint. After a while I would like to change the color of that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I am upgrading some macro code (actually VB.Net code in standalone .Net 3.5 Windows Forms application) from Corel Photo Paint XI to Corel PhotoPaint X5.
My previous CorelScript.BitmapEffect("Replace Colors", "ReplaceColorsEffect.V11 RepClrInColor=5:255:255:255,RepClrOutColor=5:0:0:0,RepClrIgnoreGrayscl=1,RepClrSingleClr=1,RepClrRange=0")
used to replace the white color in a bitmap to black.
This doesn't seem to work in X5. Is there some documentation available on the use of Bitmap Effect?
If I'm using the color mask and i want to know the luminosity of an image can I use it for Luminosity mask?the reason is PP does not have something as Photoshop.
View 12 Replies View RelatedI am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedIs there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
I'm not sure if i can explain this properly, but I'll give it a go;
How can I change the color of a picture (jpg) so that the picture is build up in one color only.
I want the effect as shown the pictures below (assuming that the original sky was blue/white-ish)
is it possible to select everything but all white pixels?
View 2 Replies View RelatedHow I can change the corners of a jpg so they are round.
View 1 Replies View RelatedCan I change a photograph I have been working on to look like a sketch....... to 300dpi ?
View 6 Replies View Relatedi'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing... i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..
View 2 Replies View RelatedI'm having trouble using the paint brushes in photo paint x6. i open a JPEG or bitmap then use a paint brush to paint on the image but there is no paint. do i have to use a mask now? I tried copying a dupe for a second layer to see if that worked but nix. i still have x4 and i do it there. but what's with x6? all the other tools work but the paint brush.
View 14 Replies View RelatedI have an image with a "rainbow" (a gradient of 7 colors).
How can I select each and every pixel of that image that contains at least a shade of red? That is, every color whose Red component (from its RGB code) is between 1 and 255.
For Corel PHOTO-PAINT X5
I have a grayscale image (pencil sketch with pencil shading) of a glass object in a CorelDraw document. I'm tired of having to go to Photoshop Elements to edit images in CorelDraw docs, so I opened it in Corel PHOTO-PAINT X5 from within CorelDraw to edit. I want to change the image's 'white' (actually slightly gray) background to a color appearing in the CorelDraw document.
I tried using the Magic Wand to select all of the 'white' background, but the popup says the WAND only selects ADJACENT pixels! Isn't there a way to select ALL pixels of a given color like in Photoshop E. (conitguous/non-contiguous)? If there is a simple way (without the Wand) to change the background color of an image (not of a PP doc!!), I would nevertheless also like to know how to select non-contiguous pixels of a particular color with the wand. Also how to invert a selection. Also, how to select a color in CorelDraw to use as a fill color in PhotoPaint (both X5).
I would like to be able to change my screen color. It opens in white. For a lot of my work it would be easier for me to see what I am doing with a darker screen color. Can I change the screen color from white to a darker color.
View 9 Replies View RelatedIs there a swap color hotkey in photo paint? I look in customization, din't found any.Is there a way to delete a pixel?
View 2 Replies View RelatedSnap_2012.04.24_17h42m46s_001.png
I recently calibrated my monitor with a Spyder 4 Express. I process my RAW images in ACDSee Pro, saving them as tiffs - ProPhoto RGB. Yet when I open the same images in PP, skin tones are quite saturated and I'm wondering why? Prior to calibrating my monitor, everything was normal across all my programs, as it is now in ACDSee Pro. But not with PP and OnOne. Something has changed between the programs and I can't see what. I've attached my current Color Management settings from PP.
When modifying bitmap all of a sudden my colors in my standard pallet change to just a few colors. When I try to open another pallet (standard RGB or something else) it won't give me back the colors. I have to save my work and start PP again. Then I can go on.
View 8 Replies View RelatedRunning Windows 7 - 64 bit with X5. About 2 weeks ago PhotoPaint tools changed from a nice, easy to use circle, showing the size of the nib in use (paint brush, clone, mask brush, eraser, etc) to a representation of the tool with no indication of how large the nib is. I've tried working through this, being busy with work, but it's very frustrating and was so much easier with the nib circles - showing the size.
This is the same thing that used to happen in V.12, and previously the solution was to return to a checkpoint in the system, re-install and all was set back to normal. It's been almost a year since switching to X5 and have no memory on how or what the process was back for V.12.
Any program which can be used to change the EXIF data.In particular, I want to change the shutter speed. Photomatix
apparently reads the EXIF data to determine relative UV.
The Screen and Multiply blend modes seem to change EV by about one. Naturally, this can't recover pixels at (0, 0, 0) or (255, 255, 255) but it comes close with most other values.
how to make a PNG in PP so that there is not a residual trace of the background color. Notice on the picture below. There should be the white circle around the red circle, but then there is also the trace of yellow, which is the background color (and what I chose under PNG Export as the Transparency > Image Color. This has always happened for me using PP and PNGs, and I assume there must be some setting to avoid that so there's a smooth PNG export, but I can't seem to figure it out.
View 3 Replies View RelatedI selected interesting areas of raster using color mask so I have about 300 areas masked. I'd like to change their color (from 100% black to 30% black). How can I fill them all together with new color (not painting them one by one)?
View 2 Replies View RelatedAfter you rotate single color object you get object with 2 colors on it.
Alot of darker lines appear on rotated block.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I've got two different color balance problems. The first is where I have two photos that I want to match the lighting in each.
The second is where I have a 'control' and I want another photo or print to 'match' it.
Currently I'm having the second problem. A customer brought in an original painting for us to scan and make holiday cards from. But they also brought in a photo print from a local chain and they have asked me to match the color representation from that print.
It is duller, the blues are purple and it is over all darker. Personally, I think the photo is a horrible representation of the painting. BUT IT IS WHAT THE CUSTOMER WANTS.
I've scanned in both the photo and the original drawing. If I print the photo it matches the color of the scan. (but is the wrong crop size and can't be used for the card.) How do I draw color out of that and get my original to 'match' other than just using my eyes? (which is about impossible for me today) I normally use 'sample/target balance' in corel PhotoPaint, but you can't do that between two layers OR between two files. This would be a great change to make in x7 or an update.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I've done batch processing before, but unsure of how to simply change the jpg compress on all files in a root folder (with subdirs). I guess I'm stuck in not knowing how to set the compression since this is done in the saving of the file and not really the script part.
View 2 Replies View Relatedfit.jpg
Is there a way to reduce the percentage of view so that the image fits in the (right) window?
corel.jpg
I have a problem with the color management of my corel Photo Paint X4.I create Flyer in CMYK and the color management is set as you can see in the attachment.On screen all colors are correct, but when i print something the colors look like it ignores the color management settings for the printer.
When i open the same document in my old Photo Paint 10 with the same color management settingsthe printing has the right colors...
I cannot use image sprayer in Photo Paint. The moment I select the tool, Photo paint crashes!!! I have downloaded service packs, tried to repair to no avail.
View 3 Replies View RelatedI do a lot of pixel art for games - how do I set up a second window of an image at a different zoom? Here's a picture of Photoshop doing it...
How do I do that in Corel Photo Paint, so I can edit at two zoom levels at the same time?
I am evaluating x6 and considering upgrading. I have been a daily Corel user since the 1990's and usually do every-other upgrades.
Anyhow, I am having a problem exporting TIFF images. The bottom part of the image is corrupt. White band. Interesting, if I open the TIFF in Corel PhotoPaint it's perfectly fine and fancy, but If I preview in Explorer I get the band, emailing it the recipient complains about the white band which obliterates the bottom 100px or so.
As far as I know the Adobe TIFF spec has not changed since 1991, maybe 1996..
So is this a limitation with the trial upgrade or a bug or a weird harold situation?
Everything else seems great, I'm excited about running corel 64 bit on an 8 core machine with 16 gb, It does seem like there have been some things removed which were previously very useful for production, and now they are gone or perhaps just missing. For example, how do i pop out the pallette and see all the colors at once? I think now I have to scroll at the bottom and it's annoying as heck.