AutoDesk Smoke :: Monitor Preview Bmd Intensity Stretched In Pal
Jun 22, 2013monitor preview bmd intensity stretched in pal (a litttle bit), so a circle does not remain a circle, getting a egg. preview on computer monitor ok.
View 4 Replies
ADVERTISEMENT
AutoDesk Smoke :: Get Viewport To Broadcast Monitor?
Aug 22, 2012I run Smoke 2012 Adv Ext1 SP1. The hardware is old, like 5years now.
The way I remember it our GFX card is not powerful enough to feed a broadcast monitor all the time, the output only comes up there when I'm in player.
But, unless my memory's even worse than I thought, I used to get a full screen output from the viewport that was selected (with the blue 'Monitor' display) in Action and Batch.
I can't seem to get this working again. I suppose it's in preferences, but the multiview section is greyed out.
I include 2 shots.
AutoDesk Smoke :: Use Enzio Monitor On Mac And Get 10 Bit Output?
Oct 9, 2011Can I use an Enzio monitor with Smoke on Mac and get 10 bit output?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
AutoDesk Smoke :: Broadcast Monitor Preferences
Jul 14, 2013In the Broadcast Monitor Preferences, under the Broadcast Colour Space, when exactly should I use the "Normal" option, and when should I use the "With Headroom" option?
the "Include YUV Headroom" option during Import and Export of Quicktime files, but it's the Broadcast Monitor option.
AutoDesk Smoke :: Backburner Web Monitor - Forbidden
Mar 21, 2013Ok, so I'm new to this and for some reason I can't enter Backburner web monitor. I used to but al the sudden I can't instead I get this message:
Forbidden
You don't have permission to access /backburner on this server.
And when exporting I just get partial films, about 80% of the film. Any clues?
AutoDesk Smoke :: Monitor Is Not Active Tab For Select DVI Output
Feb 2, 2013in the preference Monitor is not active tab for select Dvi output ,is only Off is not detected the output DVI. I do not understand why the first project in the preferences screen brodcast is a choice DVI output, if you do other projects is no longer selectable, only OFF.
View 8 Replies View RelatedAutoDesk Smoke :: Locking Viewer In CFX To Broadcast Monitor In 1-up
Jun 22, 2012Is it possible to lock the CFX output to the broadcast monitor so that I can see the changes I make on the image in the broadcast monitor while working in the 1-up view? This way the CFX schematic can fill my 23 inch computer screen. So far i have only been able to do that with the 2-up, etc views. As soon as I switch to the 1-up view or swipe to the left while in 2-up view (which switches it back to the 1-up) the broadcast monitor shows whatever I am working on be it schematic or other.
When I am in the 2-up view and I lock the right part of the 2 up view to the broadcast monitor I usually maximize the left view to fill the screen. It however does not fully fill the screen and keeps the right view scaled to a very small size on the right.
AutoDesk Smoke :: How To Delay Computer Monitor Video
May 22, 2012In our edit suite we have the usual video delay from the output of the Kona card through the suites monitors. We also have an audio delay box to correct for this. Our client monitors are all in sync. In Final Cut there is a control to delay the computer monitor video to have it in sync with the rest of the system. In Smoke we cannot find a similar delay. We see the audio delay in preferences but that changes the wrong offset. how to adjust the computer monitor delay so we are all in sync?
View 5 Replies View RelatedAutoDesk Smoke :: Delay In Broadcast Monitor Output
Nov 19, 2013Having a very noticeable delay to my broadcast monitor. When I play sequences through FCP7 it's fine. Running an SDI signal out of an AJA IO XT into an SDI input on a FSI BM 210. Do I need to change some preferences in Smoke?
View 2 Replies View RelatedAutoDesk Smoke :: Secondary Only Output To Broadcast Monitor?
Jan 22, 2014When I have a Primary and Secondary set on the timeline my boradcast monitor only displays the secondary unless I hav ethe big viewer up. I'd like to lock the output to the monitor to always be the primary output track regardless of player status.
Smoke 2013 Ext1
AutoDesk Smoke :: Get Both Video Monitor And External Display From Macbook Pro?
May 23, 2013I'm just about to order a BM card for video monitoring but looking for connection setup that allows me to get both video monitor and external display from my macbook pro?
View 2 Replies View RelatedAutoDesk Smoke :: Unable To Find Settings To Keep Broadcast Monitor The Final Output
Nov 13, 2012When I go into CFX/Action my broadcast monitor switches to the schematic view. Since I already have the schematic view on my computer monitor I want the broadcast monitor to keep the final output. I looked in the preferences but I can't find the right setting. Is there a away to do this?
View 1 Replies View RelatedAutoDesk Smoke :: Upgrading To SAP SP1 No Broadcast Preview
Feb 3, 2012I just update my smoke to SAP SP1 today, but I don't have the preview from my broadcast monitor anymore...(Damn!! Sometime I hate updating the software when u already have stable system..!!)
I already update my AJA driver to 10.0.1, and from System Checker software, everything look good.
AutoDesk Smoke :: Random Superfast Realtime Preview
Aug 9, 2013I can scroll through UNRENDERED CFX clips in the timeline and have an amazingly fast realtime-preview of the result on the broadcast-monitor (only). I had to record this phenomenon with my phone.It instantly feels completely different!!! URL...
View 6 Replies View RelatedAutoDesk Smoke :: Multi-screen (2xHD) Preview
May 8, 2013A project that I will soon start is a two-screen projection composed of 2 HD screens.
I wonder if it's possible to set up Smoke 2013 to output 2 HD streams simultaneously in split mode - one half of a timeline goes to one screen, and the other half goes to the other.
If it is possible, what kind of hardware would this setup require?
AutoDesk Smoke :: Unable To Get Preview When Importing 3D Model / Choosing A Font
Jul 26, 2013When doing a import of 3D model or choosing a font, I don't get preview, just a bunch of empty thumbnails... why... and how to update.
View 3 Replies View RelatedAutoDesk Smoke :: Viewing Panel That Can't Preview Dual View When Switch To Src-Seq?
Dec 13, 2013I'm having a problem to the viewing panel that cant preview dual view when I switch to Src-Seq.
View 4 Replies View RelatedLightroom :: Slow Preview On Second Monitor?
Oct 29, 2013I'm using two monitors with LR5, and the second monitor is the preview screen. I find the preview on the second monitor to be painfully slow in both the Library and Develop modules:
1) If I am the Develop module, and I move to the next photo, and zoom the preview to 100% (or if it is already at 100%), it take a minute, literally, for the preview to display correctly.
2) In the Develop module, sometimes the display does not update correctly at all. If I adjust a slider on the Details tab, however slightly, the preview then updates almost immediately.
3) In the Library module, if I switch the main window to single photo view, and view 100%, then, as I browse the photos, the main window updates very quickly, but the preview window lags behind.
I'm working with Fuji X-Trans RAF files, and this maybe this si the issue? JPGs update almost immediately in the preview window in both modules.
After Effects :: Preview On An External Monitor?
Jul 10, 2013I have an external Cinema Display plug with Thunderbolt, but this one don't appear in the external monitors list in the settings menu. I have only access to Firewire output.
View 2 Replies View RelatedIllustrator :: How To Preview Document On Monitor Without Bleeds
Mar 6, 2010I have a document I created in Illustrator CS4 (Mac OSX 10.5.8) with 1/4 inch bleeds.It's a rather small document and the bleeds are very distracting (but I need them for final printing).
Is there a way to preview the document on my monitor without the bleeds? If so, how?
AutoDesk Smoke :: Smoke And AJA Dual Stream Stereoscopic Output
Aug 29, 2013I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedAutoDesk Smoke :: Smoke And Sub-blacks / Super-whites
Feb 26, 2013Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedAutoDesk Smoke :: Best Plugin To Do Spline Warps In Smoke
Jan 16, 2014What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedPremiere Pro :: CS6 Crashes After PC Wakes Up From Sleep / 2nd Monitor Blocked By Preview
Oct 7, 2013When I work on a project in PremierePro CS6 v6.0.5 and put my PC to sleep, Premiere crashes almost every time I boot up Windows again. There is no error number or anything, just a window saying that PP does not work and I only have the option to close PP. So I basically have to quit Premiere every time and load up the project again when I continue working on it, which can take some time if this is a long project.
This also happens with other PC I could test this on. This is happening since the very first version of PP CS6. I had a chance to test PP CS5.5 on this issue and this was not a problem their. I was testing with Win7.
I already submitted this bug quite a while ago, but all the updates did not solve this problem.
There is also another bug I noticed related to the second monitor preview in PP CS6, that also is not getting addressed for quite some time. When using a dual monitor setup the full screen preview on the second monitor does not minimize if I minimize PP by clicking on the PP icon in the taksbar. If I use the minimize button in the PP window (top right) the preview on the second monitor stays in the background as it should. Also if PP is minimized and I am working with another application (reading a PDF or surfing the web fo example) the PP full screen preview appears after a while on its own and blocks the second monitor. So I have to go to the PP window and back the the application I want to work in in order to get rid of the preview monitor being blocked.Here you can see what I mean: [URL]
This issue has also been tested on other machines with Win7 and they all had this problem. This two issues are obviously not related to my setup because I can reproduce them on other machines.
AutoDesk Smoke :: Importing And Using Alpha Channels In Autodesk
Oct 2, 2012I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
AutoDesk Smoke :: Can Smoke Support OFX Architecture
Oct 18, 2012Can Smoke support the OFX architecture?
View 1 Replies View RelatedAutoDesk Smoke :: Selections In Smoke As In Combustion?
Jul 10, 2012Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedAutoDesk Smoke :: Importing TWs To Smoke
Jan 10, 2014Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedAutoDesk Smoke :: Run Flame Over VPN
Oct 27, 2013Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
AutoDesk Smoke :: Takes All The Available RAM
Aug 5, 2012I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
AutoDesk Smoke :: EXR Look Different On Import
Nov 14, 2011I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View Related