I'm trying to simulate a light beam, but my rays have such hard edges (especially the one on top). Is there no way of 'fading' them out or blurring them? I tried AA, but that didn't work.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am trying to get some volumetric rays generating from an image. The camera is moving and so they need to exist in 3d space. I tried turning light to rectangle area and adding a rays node but no joy.
View 1 Replies View RelatedIn times past I often would add a top layer to my timeline and hard commit a top layer for exports and tape lay offs. It always made keeping up with things finished a little easier for me.
I'm wondering when clips are soft imported and not applied with an effect that make a render, where is this hard commit coming from? It's instantaneous when all is rendered on the timeline so I'm not thinking it's caching the soft imports. But I do wind up with a single hard committed clip.
I have calculated some test renders on a small portion of the timeline in order to check things up. Now I would like to delete them and calculate everything at a later time.
Do you know the way to delete renders in order to save hard disk space ? I have tried the "force purge" function, but it didn't delete anything, the "Autodesk media storage" folder is still the same size...
And manually deleting renders in the "Autodesk media storage" folder messes everything up.
When I use Paint module with Graphics menu, I get bad edges randomly on the image in action. The default setting of Anti-aliasing in paint module is 4 now, and I have tried to change the value from 4 to 1, 1 to 4. the only differences are the amount of, position of bad edges.
I also tried to check the "Divide" function in the media-list, but it gets from specific colour to white. I only want to take the bad edges away from the image.
When I draw a line in photoshop creates a blurry outline around the line that does not occur when I draw the line in Paint. How do I achieve the same solid line in Photoshop?
View 5 Replies View RelatedI need to create several domed solids (as different parts) based on 2D sketches of various shapes. I am trying to emulate domes that you might creating by pouring thick resin.
Using this forum I have found that you can do this easily using Loft to-point, then use the Conditions tab to get the dome height/shape set nicely.
The only problem is when the 2D shapes have a corner that is too sharp - then it leaves ridges on the domes - like the arrows show on this example - which is based on a simple rectangle with 0.5m radius corners:
I found one thread on this forum that said to use Delete-Face, then Patch - but the I couldn't get the patch to leave nice smoothed edges - and without bulging.
im having a hard time smoothing the edges of my character. i tried deleting the hard/solid edge but maya cant and always ->// Warning: Border edges cannot be deleted merged yes its already merged with the body... i tried to relax the vertices but still didnt work
View 1 Replies View RelatedI know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedIs there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedWhat is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedI am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
Can Smoke support the OFX architecture?
View 1 Replies View RelatedDoes Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedWhats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedIs it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedWhere do you set context in batch in the 2013 prerelease?
View 9 Replies View RelatedWhen I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies View RelatedWhat is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
I am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).
View 6 Replies View RelatedCan i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies View RelatedGetting a depth of field result in Smoke 2012. A tutorial on this would be really beneficial for a new comer like me.
View 9 Replies View RelatedAll of a sudden, I'm unable to scroll through clips with real time feedback. Did I turn on some preference?
Also, I've noticed that when I'm in Action, I don't get realtime feedback going to the broadcast monitor, but rather the image catches up upon pen up. I don't see anything about it in the options in Action or global preferences.
When applying CFX to the clip it ignores resolution of the project and the time line and creates a resolution of the whole CFX based on clip.
In other words 1080 clip in 720 timeline creates CFX with 1080 out node, ( all action creates in 1080 swell) and only then send 1080 output to timeline where it applying resize soft effect. I know i can change resolution of action, but a can't change resolution of output node ( the las node that feeds output to timeline.) Is there an easy way to work around to feed lets say 720 to escape resizing in timeline.
I'm on 2012 SP3. I'm able to import and work with ProRes 422 just fine. But when I go to output and choose Quicktime, no ProRes options appear. Do I have to set this up somehow?
View 1 Replies View RelatedI'm doing far too many inadvertent moves/deletes/copies, simply by clicking pen for menu to appear, only for it to commit to whatever the pen position was at. This happening in the library area is no fun at all....not sure what the answer is really! but it's not ideal....
View 9 Replies View Related