AutoCad :: Publish Library Of Blocks To DWF File?
Nov 30, 2012
I am trying to publish our Library of blocks to a DWF file to import into DWF reviewer for a symbol library. I have done it fine in the past, but for whatever reason my Publish Options keeps reverting to the default to no include block information which we need to import the symbols properly.
I have tried the pdf and dwfx publish as well and the same thing is occuring. I have also looked at the plotter file and don't see anything that is causing this.
View 1 Replies
ADVERTISEMENT
Aug 29, 2012
I created a customized frame profile and want to publish it to the library. However the error message shows that "You d not have a Read/Write library configured......". I went to the project (default project) to change library to "Read/Write" and open the file to publish again. The error message is still the same.
View 5 Replies
View Related
Oct 10, 2012
I am trying to publish a i-part to the library. I follow the process and everything and it is suppose to be successful (see attached). But after that, I can't retrieve this item in the library.
Using INV 2012 with SP2 installed.
View 1 Replies
View Related
Oct 2, 2012
We are currently moving from 2009 to 2013 and have a variety of drop down menus and palettes. I want to promote the use of the ribbon menus and new set up.
What is the best way to set up the block libraries? Could I just use the Design Center references block drawings?
Is it easy to convert existing palettes / menus to the new format?
View 1 Replies
View Related
Aug 16, 2011
How can i add Blocks Library to Acad2012 like in the older versions and see them by clicking any button as icons menue.
View 5 Replies
View Related
Mar 23, 2011
i use autocad 2011. I need to create some lighting bloks and put them in some library to use in some porject and also export it to other pc as well. How can I create library?
View 6 Replies
View Related
May 31, 2011
Is there a way to create a library of walls using dynamic blocks (similar to the walls in the full version of autocadd)? I've payed around a bit trying to create a dynamic block and I'm not having much luck.
View 9 Replies
View Related
Aug 23, 2013
I've been using autocad 2012 student version and all the blocks I've used in my dwgs up until now, is blocks I created myself or blocks that I get from someone else. Now, I've been told that autocad comes with a library of blocks in plan and elevation view. How do I access them?
View 9 Replies
View Related
Jan 24, 2012
I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies
View Related
Oct 12, 2012
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
View 1 Replies
View Related
May 9, 2013
Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
View 1 Replies
View Related
Jan 17, 2012
I can publish my assembly to a dwf using the express option, but can't using the the custom or complete options.
I have gone into the sub assemblies and tried to publish from them - 2 of them work 2 of them give the same error message.
I then went into their sub assemblies and was able to publish them (so that's 2 levels down now).
I have used rebuild all - working my way back to the top level assembly.
I have some sheet metal components in the various assemblies.
View 6 Replies
View Related
Jun 20, 2013
I am using AutoCAD LT 2014. I have started to have trouble loading the page setup from the Publish manager. I used to be able to click, "import" and select the dwt file I required. I could then use the imported page setup to publish the sheets I wanted to PDF. Now, when I try to import, it is not populating the pulldown list with the imported page setup.
View 7 Replies
View Related
May 8, 2013
When I created our custom profile ".arg" file, with two custom workspaces along with the OTB workspaces. I set the Auto Publish Settings to publish to PDF on Exit. With 50+ users, each can create thier own workspace for thier liking.
I have some users that like the feature, and others that do not. The ones that do not like the feature, want to turn the feature off.
So the question is if, under each individual workspace, we uncheck the Auto Publish feature, then save that workspace, is the feature turn off for JUST that workspace? Or does it cut the feature off for all workspaces?
AutoCAD 2012 / Inventor 2012
View 6 Replies
View Related
May 25, 2012
how to change the publish settings so that it prompts asking for a location to save when I publish to PDF? Right now it's just saving to the default output location and I need it to ask every time where I want to save the file.
View 3 Replies
View Related
Oct 23, 2013
When I am working on several drawngs at the same time, I use the Publish command to plot them as a group. However to save the settings as a DSD file for future use, every open file needs to be saved. Why is this? Is there a way to disable that requirement?
There is no reason I can think of besides "by design" for this. The DSD file is only a list of drawings and their plot settings and is not dpendent in any way I can think of, to whether or not one its drawings is open and not saved.
View 7 Replies
View Related
Aug 31, 2011
In ACA2012, we cannot use the Publish command to overwrite an existing DWF file of same name, for instance you publish a set, then need to re-publish and overwrite the earlier version. We get an error message that the DWF is currently open in another program...when it clearly is not open anywhere and Design Review is closed. We have several servers running different versions of microsoft server, but the results are the same to any of them.
We do NOT get an error message when publishing/overwriting to the C: drive, only a network path. Also, if we use the Print command instead of Publish, well it only does the current page but it DOES allow the networked DWF to be overwritten.
I am puzzled by what could be the difference in that Publish will not overwrite a networked DWF file yet Print will?
This has never happened to us in previous versions of ACA or Design Review.
View 1 Replies
View Related
Dec 28, 2008
I'm using CorelDraw X4 on a Windows Vista Home Basic System. Trying to "Publish to PDF" produces empty PDF Files, with a page size of 0 mm x 0 mm. The original File has a layout of (German) A4 and a textbox with "Test".
There are no error messages.Even using a PDF Printer (FreePDF XP) doesn't produce a file, but gaves the error message
"%%[ Error: undefined; OffendingCommand: -0,15789 ]%%GhostScript Error 1. Error, no PDF file produced! (False)".
View 14 Replies
View Related
Feb 10, 2012
I am using Corel X5 in Windows 7 OS having 4GB RAM with Intel Core i3 processor. When I converting cdr file to PDF with prepress PDF preset will resulted a crashed PDF file. But with 'web' PDF preset may results fine. But the resolution goes high or custom , output is a crashed file.
View 7 Replies
View Related
Apr 7, 2012
When I try to publish to Flickr from LR4 after about an hour I get error saying file to large. Only published about 17 out of 600 images. If I try to restart fails quickly. How do I publish all of these to Flickr.
View 8 Replies
View Related
Dec 11, 2012
Is there any way to publish a revit project to a locally stored dwf file? I want my students to be able to submit dwf files for grading without setting up buzzsaw accounts.
Seems strange that there is no obvious solution in the ribbon. Are we relegated to printing to PDF?
View 2 Replies
View Related
Apr 21, 2014
I am finding missing fonts when I publish a PDF document from InDesign CC file.I tried to install the custom fonts in my system, but the installation is not getting completed.
I am using the fonts like, Akzidenz-Grotesk and Helvetica family fonts.
View 1 Replies
View Related
Sep 17, 2013
When publishing an Edge composition all of the javascript gets minimised, which is great.
It'd be great if 'compilation' tools like this could be added/removed, either as a software-wide plugin or as a list of processors in the publish settings.
This could be used to do the following sorts of things: Obsfucate codeUse alternative JS minimiserOptimise SVG assets (remove identity transforms, resolve certain 'use' nodes, etc)Compress / Recompress imagery (similar to flash's JPEG publish settings).
View 1 Replies
View Related
Jun 20, 2011
I have several AVCHD folders I've copied to my HD in the last year from my Panasonic HDCSD20. Now I'm ready to edit them in VSX4. Is there any advantage to using "file/import media file to library" (which makes a copy in the working folder) vs just clicking on the folder icon and adding them? I've looked at the file size on both the original clip and the imported one and they are identical. It does seem as though VS extracts the original date and time shot and uses that as the imported file name,
View 2 Replies
View Related
Mar 8, 2013
I've finally tried to migrate company's xml to adskib.
The result is some strange message in IPJ details. "Inventor Material library" strings in "Appearance libraries" and "Material libraries" are both red and tooltip says "The protein library file is not available".
Why protein? Does it have any relation to [URL] ....?
View 6 Replies
View Related
Nov 19, 2009
I have recently installed Inventor Suite 2010 on a new computer and I am receiving this error on a majority of my files.
Cannot modify the library file W:T46DManufacturing Drawings8300673-.idw
Component W:T46DManufacturing Drawings8300673-.idw is not checked out to you. Edits are not allowed on this file.
I understand this has something to do with using Vault. However since I am the only one using Inventor and these files are not shared, I did not install Vault on the old computer or the new one.
View 3 Replies
View Related
Jul 1, 2013
we have problem opening read only files with Autocad 2012, 2013 from Sharepoint library. When user opening dwg file directly from Sharepoint library (with Share point webdav, from Explorer for example) to which he have only read only access, Autocad gives error
„Drawing file is not valid“. The same result for UNC path (\intranetprojekceRizeniProjektu64ArchivProjektu102575) or mapped drive.
When he use Autocad open dialog to find the file in Share point library and use „Open Read Only“ from dropdown, file is opened fine.
Also if user have write access rights to library (when I add him rights for writing for this library), autocad works fine.
We need opening files directly in Sharepoint library (not to download them to users computer) cause DWG files have attached another DWG files from library as XREFs.
May be the problem could be caused by DWL files, which cannot be created in read only library, whilst autocad didn’t recognized the library is read only. But we didn’t find how to disable DWL files in autovcad 2012 or higher.
View 3 Replies
View Related
Apr 11, 2011
I managed to change a setting to where my files are being saved in a library folder and I can't edit them. I don't wish to continue with this nonsense. I want to be able to edit the files. I am not using a vault but still get a message that the file I am trying to open is not signed out to me. How did I manage to mess my settings up this badly. I don't remember changing any of my settings.
View 7 Replies
View Related
Jul 19, 2005
All of a sudden I get this message when I try to change the materials of any part within my workspace folder. I looked at the project and everything looks fine. I can save the file but cannot change or add anything now.
View 5 Replies
View Related
Sep 17, 2013
I have a "steelplt.png" file that Inventor tells me is not in the correct library path. The problem is that it is in the correct path as defined by the project file. I cannot check in dwg because the "steelplt.png is not in the correct library path".
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
View 2 Replies
View Related
Oct 20, 2011
When I try and publish a image or document to PDF it produces a blank PDF document.
I have tried using Bullzip PDF printer but that also produced a blank PDF.
View 4 Replies
View Related
