AutoCad :: Draw Swing Of A Door?
Apr 24, 2005I'm stuck on trying to draw the swing of a door. I know it's something simple but it's got me !!
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Represent Door Swing In IDW
Nov 30, 2011I would like to add a door to the model but show the top view as a door swing.
View 7 Replies View RelatedAutoCAD Dynamic Blocks :: Door Swing Arc Does Not Scale Correctly
Jun 19, 2012I am trying to get the door swing arc to scale correctly as the width of the box is changed.
But the block is defying logic by scaling the arc radius exactly 5 units short of what it should be.
I've tried deleting, recreating, and chaining the parameter over and over only to have the same problem each time.
AutoCAD Architecture :: Add Automatic Property Set Definition For Door Swing Direction
Oct 8, 2012I would like to add a automatic property set definition for door "swingdirection" in my door schedule and replace the “left” with LH, “right” with RH and if neither (N/A) with DBL (for double leaf doors).
I thought I remembered being able to view source code in 2004 ADA for how to change and replace but I’m lost in 2013.
Revit :: Door Schedule - Direction Of Swing
Feb 25, 2012Can you show the direction of swing in the door schedule?
View 4 Replies View RelatedRevit :: Changing Door Swing Direction
May 21, 2013I downloaded a toilet stall that looks pretty good. But the door swing is on the wrong side for my plans.
Short of starting from scratch, is there a way to change the hinge side? Some restrooms have the hinge on the right side and others on the left. I'd like to be able to change this via a parameter. If I could figure out how, I'd add the param to the family. URL>...
Revit :: Door Swing Elevation Line Display
Jun 14, 2012I am currently running Revit Architecture 2011. I have interior elevations in my project, which include doors. The door swing lines show up solid in elevation. In fact there actually appear to be two of them. I want the elevation swing indication to be a center line style.
I have changed the swing elevation line type in object types to center (which is what I want).
I go to the elevations and there is no change in the swing indication line except that there still appear to be two lines (one on top of the other) where now one is center linetype and the other is solid. Seems like progress except that there is no actual visual difference.
There is only one symbolic line in the family. If I un-check the draw in foreground box the elevation line disapears entirely when reloaded into the project.
This is an OTB door. I can place it in a completely new template and it displays fine. So it I am thinking it is NOT the family. There must be some setting in the actual file itself controlling this and I am stumped.
AutoCad 3D :: How To Draw Door Handle
Apr 4, 2011draw a 3D door handle in AutoCAD?
I'm trying to draw something similar to the photos below.
As you can see I've already drawn everything apart from the handle.
AutoCad :: How To Draw Sliding Door Track
Jan 28, 2013I am working on detail drawing for a wardrobe with 2 TOP mounted sliding doors. But how do they attached on the wardrobe and how the track and rolls work.
Here is a picture for my conceptual design.
AutoCAD Architecture :: Overhead Door - Door Inside Frame
Feb 28, 2012I working on a deadline with little sleep, but I cannot believe it is this hard to get an overhead door to look right. All I want is a 1" thick frame, the same depth as the wall AND the door slab to be INSIDE the frame like a real overhead door.
The attached PDF shows the standard OH door on the left with the stupid door centered in the frame. The door on the right is one I created by inserting a cased opening in the wall, then manually drawing a rectangle and dashed line for the OH swing. All I am interested in is getting this right in plan at this point. Using Architecture 64 bit.
AutoCAD Architecture :: Linking Door Tags To Door Schedules?
Feb 14, 2012I have ACAD Arch 2012 and I am trying to associate my door tags with my door schedule and visa versa. I get as far as creating the Door Schedule with all the doors on it and quantified just the way you would want to see it; however, the "Mark" remains "A" for every door. I discovered that I can change the Mark on the extended properties of each door, but I believe there should be a better (and more linked) way to accomplish this. Since the program already recognizes how many doors there are of a specific style it should be able to put sequential "marks" to each door, for example "A", "B", "C", etc.
what's the difference between Door Tags - Project Based and regular Door Tags?
AutoCAD Architecture :: Do A Door Schedule By Styles Rather Than Individual Door
Apr 29, 2004--Is there a way to do a door schedule by styles rather than individual door?
--To clarify: I want my door schedule to create a new door number only when one or more of the property sets, classifications, or door styles pertaining to a door are not defined by other doors in the schedule. This would facilitate giving the same door number to multiple doors that have matching schedule information, and cut down on my schedule size.
--how to do this. If I need to create custom tags, schedules, or formula properties.
Revit :: System Family Door Dimensions In Door Schedule
Jan 3, 2012How can the dimensions for the system family door be shown in the door schedule?
I tried to make a instance paramater, type parameter, both through shared parameter for the doors in the family file, but they are still not showing up.
Revit :: Assign Door Tag To Facade Door Element
Dec 22, 2011How do I assign a door tag to a facade door element?
View 2 Replies View RelatedAutoCAD Architecture :: Missing Swing Lines
Apr 27, 2012It appears to be an error with swing lines for double doors when an elevation or section view from an AEC model is generated. Only one out of the two door leafs shows swing lines in any event. Could this be a legacy error after the hotfix re: hidden line projection error on elevations and sections? I applied the AecCore.crx fix yesterday and then became aware of the problem with the swing lines.
View 2 Replies View RelatedRevit :: Can't Find Parameter For Swing Orientation
Apr 27, 2005When I flip a door from left to right side can I see changes in schedule table? I can't fin a parameter for swing orientation.
View 8 Replies View RelatedEdge Animate CC :: Creating A Realistic Swing Effect?
Aug 20, 2013I would like to create an effect wherby this .gif image of the gate swings inward.
[URL]
Ive tried (admittedly) not that hard at doing it with the skew options within Edge Animate but I cannot get it to swing realisticly.
AutoCad 3D :: Door Hinge In CAD
Jun 25, 2012the steps of drawing a door hinge. I need to draw sth similar to. dwg file attached. I assume the "Subtract" command was used! what 3D object I should subtract from a shelled-cylinder!
View 6 Replies View RelatedAutoCad 2D :: Dynamic Door Block
Dec 7, 2012I had created a dynamic door block (my first one). As the block has door frame section on both ends, i need to place the linear distance parameter near the door hinge (and not on the basepoint for block insertion). This extends the door by 4" from the value of door opening i manually enter. Suppose i enter 42", the resultant opening will be 46". how can i make the block to accept only predefined sizes like 2'9", 3'0" etc
View 9 Replies View RelatedAutoCAD LT :: Dynamic Door Block Out Of The Box
Feb 28, 2012what is the secret for inserting the dynamic door block. It seems to want to rotate and flip around but I cant seem to find a way to control that when placing the door. Once it is placed I understand the swittches which adjust swint, door width and jamb thickness, but I usually have to use rotate and move command to get the door where I want it.
I am using AutoCAD LT 2011
AutoCad :: Trimming A Door Jamb
Nov 18, 2011New to Autocad and using Autocad 2010. I am trying to trim a door jamb and attached my project in this thread. The attached picture coming close to finishing the drawing. There are other door jambs in the drawing that I have not started.
Trimming the door jamb I have selected several lines. Appearing in the attachment as two horizontal lines located above the lower left square and the left vertical outside double line border. These are my step to trim these lines.
Extend Command. Select both horizontal lines. Press Enter to end the command.
Trim Command: Select both horizontal lines once more. Enter.
Select vertical outside lines. Enter twice.
Trim Command running select both horizontal lines again. press Enter.
Completing the jamb in the drawing the two horizontal lines still there only as dashed lines. After saving the project these lines appear as solid lines.
Coming close with these steps. Is it possible to show me how to trim the door jamb following these guide lines I have outlined.
Cabin04a.jpg.dwg
AutoCad :: Cutting A Door And A Window?
Jun 27, 2011I have a drawing where I have to cut a door and window into a small room. I have been able to layout the location of both, but when I highlight to erase around the nodes, it just erases only those. I used the extension object snap to layout the location of both. put nodes on the ends, and centers, of both objects.
View 9 Replies View RelatedAutoCad :: How To Create 2D Door With Attributes
Nov 16, 2011I'm trying to create a 2d door with attributes like manufacturer, order number, width, and height.
I have drawn the door as a dynamic block, making it possible to set the width of the door by scaling a linear parameter with one grip. However. It would be really cool to make this scaling when entering the attributes for the block when you insert it into the drawing. Is this possible to do? Will it acquire a lot of programming skills? Because that is something I don't have I am using autocad 2012
Door.jpg
AutoCAD Architecture :: Door Swings In Assembly
Mar 5, 2012ACA 2011:
I created a Dr & Wdw Assembly w/ 3 French doors w/ 3 Transoms above. It looks great. However, the door panels in Plan view are closed. Yet the in the properties dialog box it says they're each 90 degrees open. I can change the number, but the door remains closed. What needs to be tweaked?
AutoCAD Architecture :: Door Tags Not Updating
Jul 4, 2012I made a door tag, tagged all 128 doors and during a check set noticed that the text in the tag is the wrong font. I opened the tag and changed the font, saved and regenerated the drawing. The font in the current door tags did not change. To be sure I changed the correct tag I added a new tag and the font is correct. Why do the current tags not update? Do I need to do something? I do not want to go back and redo all 128 door tags.
View 2 Replies View RelatedAutoCAD Architecture :: Door Jambs Display In RCP
May 26, 2011In the attached image, the left is my 1st floor RCP, which looks the way I want. The right is my 2nd floor RCP, in which I cannot get the door jambs (orange lines) to turn off. Cut Planes are set identically in the two dwgs. I thought the Display Configuration settings were identical in the 2 dwgs, but clearly they're not.
View 4 Replies View RelatedAutoCAD Inventor :: Cannot Get Door To Swivel With Hinge
Sep 25, 2012I am assembling a cupboard using a hinge and a door. I can make the hinge swivel quite nicely in its own assembly file. When I add the hinge and the door to the cupboard assembly I cannot get the door to swivel with the hinge. In fact I can not get the hinge to swivel once I place it on the cupboard frame member.
View 3 Replies View RelatedAutoCAD Architecture :: Scheduling Doors From Door Tag
Feb 20, 2011Currently our door schedule populates when the doors are inserted into the drawing. I would like to know if I can set the schedule up so it populates when the door is tagged. Our doors are inserted into a base plan and that base plan is xrefed into various sheets.
The doors are tagged in one of these sheets and not the base plan. It takes too much time to stop and set up the schedule to schedule the doors across the xref for every project we do. I have read several articles but none of them explain how to schedule from the tag that I can see. I thought this was how the schedule was set up in a previous version.
AutoCAD Architecture :: Door Numbering More Than 2 Digits
Jul 1, 2012I am trying to number my doors, and the door tag (AEC6_Door_Tag), won't let me create door numbers with 3 digits. I have never had this problem before. It keeps creating tags with 2 digits.
View 6 Replies View RelatedAutoCAD Architecture :: Door / Windows Assemblies
Oct 18, 2012I have an assebly with the door going down to grade level and the flanking windows 30 inches up. I used a profile to create the assebly shape. In plan you cannot see the brick below though you can see it between the assemblies.
View 5 Replies View RelatedAutoCAD Architecture :: Custom Door Tags
Aug 19, 2013We do residential design, our doors and windows need to read 3068 and 3050 etc. I have tried everything but I cannot simply get it to work.....This is what I have done:
*Insterted a door tag from AA2014
*I exploded the tag twice and deleted the circle around the text
*Renamed the nested block and edited to include "OORSIZE"
*Went to style manager/the plan/Doc Objects/Door styles/definition/ changed it to read "STD Door Description"...
see attached file.