When ever i take print from a particular file, i get 'Project Education......' on all the four sides of the page. Is there some method to remove it!
View 9 Replies
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies View RelatedI've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I called a customer support rep at Adobe today and she told me that the education discounted version of CS4 will not allow the user to post photos on a website. Is this true? Does anyone know if there is functionality in the regular version that is not in the education discount version?
View 1 Replies View RelatedCan I upgrade to Photoshop CS4 from my PHotoshop CS2 Education edition? Is there a Photoshop CS4 Upgrade Education edition that is not Extended?
View 1 Replies View RelatedWe just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
I want to start a project on Corel which will be initially printed. So I will start with the basic Cmyk template given from the window that pops up and make sure that the Color Managements is set correctly for printing settings.
My question now lies: What should I do if the same project has to be uploaded on the web too? What I would do is:
1. Create a new project selecting the RBG template given from the window that pops up.
2. Paste the project
3. Convert the colors to RGB
4. Set the Color management to RGB settings.
5. Export.
I have an HP Destjet 9650 printer and am using Acad 2005. I can generate aPLT file, but how do I print it?
View 7 Replies View RelatedWhen scanning my project, the work appears on screen in actual size, but for the life of me I can't print in actual size, only full page A4.
View 6 Replies View RelatedI have designed a book on my laptop. I now need to move the book and its photos to my desktop machine and order the book from there.
Lightroom 4
OSX 10.7.3
How do I change a project file back to a normal .mov file so that I can play it on my iPad or send it to a freind. I have taken out all the bits that I dont want and woukd like to be able to play it as a normal file and not in "Photoshop"
View 1 Replies View RelatedI'm starting a lighting audit project, and I'd like to create a better scene, instead of relying on libraries.
Lighting software is using .scr files. Therefore, I'd like to know if is there any way for me to create a spot-on 3d room in CAD, and converting everything into a .scr file to be read.
Attached is a .txt (forum doesn't like the .scr) library model that roughly resembles my object of study (varying dimensions).
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
As a new Inventor user I wanted to get some insight and pointers on good practices for Project Files and their structure while using a stand alone Inventor seat with no Vault I am a single user at our company and just upgraded to Inventor. I have been using Solid Works for years and things are a little different.
View 9 Replies View RelatedHow can we change(open) the Project file(ipj) with inventor api using vb.net code?
View 3 Replies View RelatedI was making some changes the other day to the parts list settings inside of the styles editor and discovered that this involved needing to make the master project file a read/write condition. I was starting to get into uncharted territory at this point, but was proceeding with caution. So I went into my vault working folder in windows explorer and RC'd on the MPF and changed it to read/write. I made my BOM changes and life seemed to be good on the heals of a long holiday weekend. I changed the properties of the MPF back to read only and I thought things were fine.
Until yesterday when I started getting this message. This shows up every time I open and check out a file from Vault. Plus it also changes my MPF on my local drive back to read/write. I am also starting to get this error message when I start a new drawing file as well.
how to load .NET project dll file in AutoCAD LT for customization ? Because in plain AutoCAD command is there named NETLOAD to load DLL file but this command is not working in AutoCAD LT.
View 1 Replies View RelatedI'm working on creating iparts for fasteners. Initially I had the O.D. of all the fasteners as nominal, which created an issue when using analyze interference. All hole features are based on the minor diameter, so they are displayed correctly on the .idw. Nominal fasteners with minor diameter holes means interference.
I am currently referencing the thread.xls spreadsheet, located in the Inventor Design Data folder, within my fastener ipart spreadsheet. This allows me to maintain a constant connection to the thread.xls file if there are ever changes from Autodesk.
My issue comes about when I am placing the ipart files within assemblies. I am asked for the location of thread.xls. Once I re-establish the link, Inventor tells me it's not part of the active project. BUT, if you look at the Project - Folder Options - Design Data, it is the same location. So the project does have a link to the folder structure.
Would I have to create a library in each project so the link can be established.
Had file "weirdness" when users place "odd" characters in filenames?For example, I have several users that use the ampersand sign in the file name as in: FF&E HT.dwg.
I'm wondering if this causes an issue with the corresponding XML file since the ampersand is kind of a special character.
These users were able to open different versions of the "same" file at various points in its generation. One was the current version, another was several days old and the third version was a month or so old. Each time the file was opened (on the same day and time), the users did not get a warning stating the file was already opened and they both opened the file from Project Navigator.
We are currently running AutoCAD Architecture 2011.
In older versions of ACAD you could set Project File Search Path; I see in my new copy of ACAD LT 2103 there is no longer a Project File Search Path line in the Options/Files tab-is it still possible to set the project file search path?
View 4 Replies View RelatedI added a FILE PATH label on my titleblock but when I load it to my project file it does not show. Why it does not show, I added a new lable for CLIENT NAME it showed fine. Just to test it out I changed the lable of the second one to FILE PATH and the first one that I did to CLIENT NAME. When I loaded it to my project, the second label dissappeared and the first lable now shows.
View 1 Replies View RelatedI have a Samsung Laser printer. THe passive USB hub went bad yesterday, and I re-installed teh printer drivers. Everything prints fine from my on-line E-mail, Microsoft Word, etc. However, when I attempt to print from Adobe Illustrator I get a "Print to file" WINDOW that comes up, I never got this before I don't want to print to file (!!!!). I want to print to the printer.
View 3 Replies View RelatedI have an assembly of pallet racking, it is one complete frame which can be modified in all the desired ways by the ilogic i have in place. I wish to be able to put this frame into a new assembly but have different dimensions for each frame. I used to do this by copying all the files to a new folder so that each frame had its own parts. This has stopped working and now once one frame is altered all the other frames change to rather than having there own dimensions.
View 1 Replies View RelatedOne of our employees is having an issue where his project file keeps reverting back to a default setup and his changes are being lost. Is there anyway to prevent this from happening?
View 2 Replies View RelatedWe are having an issue where the master project file that we have created at my company keeps switching back to the default.ipj file randomly. This is causing obviously our template paths as well as other path settings to not be right.
Our VAR told us that this randomly happens. why this is happening or that my VAR is correct in what they said?
My company requires us to use two master project files instead of one and my problem is that i can add both .ipj files into the Projects navigator in Inventor and set one as the current project, but as soon as i close the navigation window and reopen it (presumably to switch to the other project) the project that is not the active project disappears from the navigation window. The .ipj file still exists, it just doesnt show in the navigator and i have to browse to find it again. This problem happens no matter which project i set to be currently active. How can i keep that from happening?
View 8 Replies View RelatedHas seen Inventor randomly reset a users project file from whatever it's set at to Default?
I have a couple of users here that for whatever reason have a habit of closing out Inventor everytime they want to close out one file and open another...yes, if they work on 10 files in one day, they've opened and closed Inventor 10 times...i.e. open, close, open, close, etc.
I've seen the project file reset happen on thier stations only thusfar.
Inventor 2010
I run inventor with Vault. I have a project file set up in my vault directory. Each time I close everything and restart my computer inventor switches the Project back to default. I have deleted every .ipj I could find. Below is a screen shot of what I see every morning. It should be on vault but it is not. If I start by checking out a file from vault it checks it back in because the .IPJ is not set in inventor.
View 6 Replies View Relatedset-up a project file that I can easily open my drawings and be able to share with others?I have lost several drawings and time because I have not been able to open my drawings.
View 1 Replies View RelatedI have a file where there are mostly surfaces and gradings. But once again i ran into a similar problem - i cannot open the file anymore. It just stops loading and then Civil crashes.
Can try to open it and maybe use MAPCLEAN or AUDIT in hope it fixes anything?
Why do these things even keep happening, i do not understand at all.
I uploaded the file to [URL]
