AutoCad :: SYM File Conversion To DXF And Settings In Radan
Aug 9, 2011
I'm using Radan 8.5 for cutting on a Kaliburn 2200 plasma. Looks like when I shut down Radan on Friday I did something wrong and lost all my settings. I did have three decimal place precision and imperial measurements but Monday everything was one point and metric. I have ACAD 2004, Radan 8.5 and Solid Works 2009 4.1 on my system under Windows XP.
1. (Radan) How do I change back to 3 digit imperial?
2. (Radan) Can I set up a profile so if it happens again I can revert back easily?
3. (Radan) When I make a drawing of a nest, I have to annotate it by hand everytime. Is there a way to automate it then modify the title? Kinda like this:
JC Fab
Program 001005XXX
where the XXX will change for each drawing.
4. (Radan) When I print the drawing nest it comes out very pale. I have black and white checked but it makes no difference. Can my pens be set wrong? How do I actually print black? The notation JC Fab mentioned above prints correctly.
5. (Solid Works or ACAD) Is there a way to import a Radan .sym file into SolidWorks or ACAD?
View 2 Replies
ADVERTISEMENT
Jul 7, 2011
recommendations for converting pdf files to autocad files?
View 9 Replies
View Related
Jun 12, 2007
How to convert a .cad (from quickcad i think) file to a .dwg, .dwf, or anything else I can view?
View 9 Replies
View Related
Nov 9, 2009
I have Code which creates PDF for the preferred layout using Adobe PDF. But problem is lines in the pdf conversion file is very thick and also the text when we zoom inside. I have done tried all the ways. Done with LWDISPLAY = off, LWT = off.
View 9 Replies
View Related
Jan 3, 2013
I have a problem converting a file into STP or IGES formats. Inventor 2011 keep crashing. I managed to do shrinkwrap which is 38MB in size. I am converting this 38MB file into other formats for customer suitability.
View 4 Replies
View Related
Jan 21, 2013
I received a 2013 dwg file and want to convert it to 2011. I am currently running C3D 2011. I used the DWG TrueView program and was able to convert the 2013 file to 2011, but none of the alignments, profiles or corridors converted over. How to convert a 2013 file to 2011 and get the alignments, profiles, corridors, etc., to convert over as well?
View 3 Replies
View Related
Aug 16, 2013
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies
View Related
Nov 29, 2011
I have Canon HD camcorder, when i import to my PC it is .mts file. I edit my .mts file using X4 Video Studio, Now i want to make DVD, which format i should select for best result with compress size ?
I tried DVD 4:3 then my video quality is goes down, and if i select DVD 16:9 then file size is increase much, which format i should select to keep file size low or same with same video quality.
View 1 Replies
View Related
Nov 3, 2011
Could I get this Max file converted to OBJ ?
View 7 Replies
View Related
May 9, 2006
Someone mentioned a utility (maybe a ps plug-in?) that some guy made that will mass convert files from one type to another etc.
View 3 Replies
View Related
Feb 26, 2013
how to convert an Illustrator .ai vector file into a CorelDraw .cdr file?
View 6 Replies
View Related
Feb 18, 2014
I have a Nikon J2 Camera. It is set to take photographs and store them on the card as NEF files these cannot at the moment be converted to be read by my Version of Adobe CS4 Photoshop. How can I upgrade my software to enable me to read these files?
View 1 Replies
View Related
Nov 9, 2012
I'm writing an application in C++ that loads vector images from a source directory and convert them in bmp or other non vectorial format in the destination directory. I need to load CDR file also, but unfortunatly I can't find a documantation regarding the proprietary CDR file format.
Of course, these informations aren't published by Corel that maintain the secret of the format. But my question is: does Corel sell some SDK that provides some functions, callable directly from the source code written in c++, that permits the conversion of the file?
View 3 Replies
View Related
Oct 16, 2011
Whenever I open the batch conversion window a file always appears in the main file list window; I have to manually remove it (pressing clear) before using the browse button.
View 3 Replies
View Related
Jun 19, 2009
I have an older version of Photoshop, (7.0), but I'm sure the Batch Conversion Process is similar with all versions.I have a folder of photos, (large file sizes), I'd like to reduce each file size to a little bigger than a Thumnail size. This is hopefully something I can do bysetting the same parameters to all the photos.Here's what I've figured out (so far)FileAutomateBatchChoose Source FolderChoose Destination FolderThat's about it - when I choose both folders, I can't seem to pull up the parameters to reduce the file sizes.
View 7 Replies
View Related
Jan 19, 2012
“Command” and “Option” settings in the AutoCAD...Is there a way to save the “Command settings” and the “Option settings” in the file but not on the “AutoCAD program”?
Examples:
The default of the “Isolate” command is “Lock and fade” For me I prefer to switch the this setting to be “Off”The default value of the command “FIELDEVAL” is 13. For me I prefer to switch the this setting to be “Off”The default setting of the “default mode” is “shortcut menu”. For me I prefer to switch this setting to be “repeat last command” ( I go to options>>user preferences”>>Windows standard behavior>>Right click customization>> default mode>>repeat last command. Is there a way to save these settings on the file such that if we open this file in another computer then we don't need to set them again?
In other words, why aren't the “Default settings” “Option settings” saved on the file the same way the “Drafting Settings: like sanps, Osanps” are?
View 8 Replies
View Related
Dec 5, 2013
I'm using an embedded ACAD, and getting half-finished field-to-finish dwgs from a sub-contractor. I'm having a hard time getting his lineweights to conform to the output needed.
View 6 Replies
View Related
May 8, 2013
When I created our custom profile ".arg" file, with two custom workspaces along with the OTB workspaces. I set the Auto Publish Settings to publish to PDF on Exit. With 50+ users, each can create thier own workspace for thier liking.
I have some users that like the feature, and others that do not. The ones that do not like the feature, want to turn the feature off.
So the question is if, under each individual workspace, we uncheck the Auto Publish feature, then save that workspace, is the feature turn off for JUST that workspace? Or does it cut the feature off for all workspaces?
AutoCAD 2012 / Inventor 2012
View 6 Replies
View Related
Dec 27, 2012
I recently switched from Civil 3D 2012 to 2013 student version because when I initially installed the program I probably messed up some of the settings that I shouldn't have for my entire application. After reinstalling it, I noticed that the program seems to run just fine but the settings for the original file I'm trying to work with remain, such as label settings, linescales, etc.
I want my drawing to match the settings of new drawings when it comes to labels, scales, and anything else I might have changed. Is there a way to apply these settings to my original file? If not, is there a way to at least make sure the label styles can be reset? I don't want any changes to the settings I made to be present in my file.
View 4 Replies
View Related
Jul 12, 2010
I can't remember how to import a ctb file into my plot settings for a drawing?
View 9 Replies
View Related
Nov 20, 2013
Recently we have discovered a problem (bug?) with the survey database. We usually import our field data from our Trimble controllers into the survey database (SDB) through Trimble Link. We have been very careful to get all the survey database settings right, so that the data comes through correctly and have been successful up until the last few weeks. We find this a good workflow, where we are able to make edits to our field data (change target heights etc) easily in the SDB and comparisons with Trimble Business Center and direct output on-screen in the controller confirm that our data is reliable. We often have both GPS (long Network RTK vectors from the nearest network base station) and total station observations in the same file.
The issue is that, as the fbk file is imported, the survey database settings change to reflect the content of the fbk file. The "Atmospheric conditions" and "Curvature and Refraction" settings, which I have purposely left unticked (the controller applies these corrections), become ticked. This throws out our heights, especially on the long GPS lines.
We do have the option for a workaround, which involves going back into the Edit Survey Database Settings after import and updating the data in the sdb, but this is clumsy.
This seems to be similar to the issue that was discussed here. However, we have only just encountered this issue in the past month or two, which coincides with when we rolled out C3D 2012 Service Pack 4 across the office. We are planning on implementing 2014 soon, so I have tried it out on 2014 as well, with the same result.
Is this something that others are dealing with too? Perhaps there's some sneaky setting somewhere that I haven't found which locks down the SDB settings preventing them from being changed on import? Otherwise, I think this is a bug.
I am also bracing myself for some comments regarding the dangers of using GPS in the SDB!
Civil 3D 2012 SP4
View 7 Replies
View Related
Oct 9, 2012
We are attempting to access the file naming prefix in documents settings but i am unable to start code or find away to get where i need.
We have a multi solid bodie part that changes on via suppression to different styles of profile we then need the file naming prefix to chage depending on what key have selected .
ie Parameter = Style with 4 Multi selctions 1,2,3,4
depending on selection picked we then need to change the Solid Bodies Prefix in document settings..
Example :: If style = 1 then Solid Bodies Prefix = Dave
View 3 Replies
View Related
Dec 10, 2012
When I try and load my cui file, my custom toolbars and settings do not show up?
View 9 Replies
View Related
Jan 16, 2013
After reviewing many similar topics, I am still at a loss here. We are finding that the settings for using shift to deselect items seem to be changing within individual drawing files.
I open 2 drawing files. In one, the shift/deselect works fine, but in the other is does not deselect anything...
Further - within the non-working drawing file, the option to activate 2 hotpoints on a line and then stretch that line no longer works either.
Like everyone dealing with these shift/select/deselect issues, we are wasting an extreme amount of time trying to resolve issues that never seemed to be issues with past versions.
View 4 Replies
View Related
Sep 2, 2012
I’m trying to create a plot command that reads settings in from a variable stored in a text file but its becoming muddled up somewhere.
(defun c:MYPLOT ();Setting nessesary variables...(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYOUTPUTDEVICE.PEN")(if(setq f(open fname "r"))(while (setq MYOUTPUTDEVICE (read-line f))(close)))(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYPAPERSIZE.PEN")
[code].......
View 5 Replies
View Related
May 9, 2013
I’m trying to put together a photo collage in PS for printing as a poster, size 600 X 900 mm.
1. First issue, what settings should I use for my new sheet/file, I would like to see how big the pictures in the collage gets in reality when zooming in the sheet. Problem is that if I set the height and width to the exact measurements (600X900) and then zoom to 100% the total collage size will be much more then 600mm width on my screen (same with the height). How do I solve this?
2. Settings for resolution and color mode. How do I know what resolution to chose? Do I need the highest possible? Same with color mode, is RGB 8bit enough?
3. When saving the collage, should I save it as a jpg-file? The pictures that I use in the collage are jpg’s. Or will I lose quality and should save it in another format?
View 5 Replies
View Related
May 23, 2008
The default appearance of my File/Open and File/Save window has changed, and I neither know how nor do I know how to change it back.
The problem is that when I File/Save, it would open the File/Save window and display the folders/files by in a List (vs Thumbnail, Detail, etc.) by Name, which is what I desire.
But, somehow that changed. When I open the File/Save (or File/Open) window, the display is now in a List (which is prefered) by Date with the most recent at the top. This is definitely not my preference and is a setback to certain tasks I do.
I reset my defaults by doing alt-ctrl-shift upon start-up, but that has not affected my File/Save-File/Open window.
how to get back to where I was before? I am somewhat desparate for this fix and have no idea how it changed. So, heck, if anyone knows certain keystrokes I might have inadverdently hit that affected the change in the first place, I'd love to know what they are do I don't duplicate them!
I am on Photoshop CS3.
View 5 Replies
View Related
Mar 14, 2006
File naming settings are being ignored by PS 8.0 when i Save for Web > Edit Output Settings > Saving Files. I want to add "_50" after the document name, but PS just saves the file in it's original document name.
When I split the image into two slices and choose Slices: Selected Slices in the Save Optimized As Dialog, PS does it right, and saves the slice as "[documentname]_50". But ofcourse i don't want to save slices, but the whole image.
View 2 Replies
View Related
Feb 18, 2014
I am under the impression that the default / ONLY DPI setting when saving as the .SVG file format is 72 in all CS# versions of AI, however does AI have the ability to save in any other DPI settings, (72/90/150/300) & if so, how can I use them?
View 5 Replies
View Related
Dec 18, 2013
In my work flow, I want to export collections for use in printing photos as well as using them in another program to create high quality slide show to view on HD TVs. I will also be storing them on a seperate drive as a back up in case I lose my catalog. I can't figure out if I should use jpeg, tiff in file format. Also in color space sRPG or AdobeRPG or ProRPG. I like jpeg as it takes my raw files from 30 mb to 8 mb so they are managable. The problem with AdobeRPG and Pro is the files become 120 mb and way to large.
View 4 Replies
View Related
May 28, 2011
Loaded a MPEG-4 Media File 3Gb, went to setting, clicked on Smart Proxy cue manager, waited 40min and clicked ok. I check my Smart proxy file manger and it was there. My power went out, when I reload CV my files in Proxy manager were no longer there, and my file is back to being slow and jerky, that means I have redo this again.
does this mean I have to cue manger every time I wish to work with the same file?
View 7 Replies
View Related
