I have a DXF file that was created by a PDF to DXF converter. The image is a portion of a land survey. I would like to adjust autocad dimensions to equal the dimensions of the original survey. I have played with the scale command but am not getting it right.
View 9 RepliesI'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedIs it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View Relatedhow to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedIs there a way to make the linear dimension a diameter dimension?
View 9 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies View Relatedis it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View RelatedI'm working on a drawing that was converted into cad and it seems like every dimension has its own style. When I copy use the move comand or try to change the dimension the text changes from being above the dimension line to centered and the text gets closer together horizontally. When I compare a copied dimension to the original it has all the same properties including the text pos vert still being above text. The actual dimension style hasn't changed at all but what is showing up on screen is different.
Here a image showing three dimensions with the same properties, the top 2'-10" is what it should look like, the bottom is what it looks like when I copied it and the 1'-2" is when I make a new dimension.
when I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies View RelatedI am an archaeologist working with survey equipment and Map3D for a few years but now I have the following problem.
When I import the shapefiles created in my leica/topcon equipment into Map3D (mapimport) there is the possibility to select which attributes are going to be imported with an import profile file (.ipf).
How do I create the above and save it so that I do not have to go through the same process again?
regarding dimensions when it comes to detail drawings. Imagine we have a line that is 12'-0" long drawn in (1/4" : 1'0"), now when I dimension it, it will say 12'-0". So let's say I want to scale the drawing to half of that to show in a (1/8" : 1'0") sheet. But now when I dimension it, it says 6'-0", instead of staying at 12'-0" long. How can I keep the dimension same?
View 3 Replies View RelatedI'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
I receive an "Import failed" message when trying to import my iPhoto library to my trial version of PE11. I am running Mac OS X 10.7.5 and using iPhoto 11. I have tried 4 or 5 times now with the same result.
View 3 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
Is there a way to make a dimension style that will automatically add a particular value to the dimension amount?
Example: actual dimension in decimal mode is 17.0 but i want the dimension to be displayed 21.0 (automatically adding 4.0 to it).
I tried to get the ExtLinePoints from a Dimension with the following code but I coudn't find it. How I can get it!
Dim objSelSet As AcadSelectionSet
Dim objDim As AcadDimension
Dim pnt As Variant
Set objSelSet = ThisDrawing.SelectionSets.Add("dime")
intType(0) = 0
[Code] ......
Even though my dimensions are accurate and visible within the drawings I cannot get them to print? AutoCAD LT 2012.
View 1 Replies View RelatedIs it possible to change the dimension style somehow, such that it adds 3 units (in this case inches).I have a client that wants the neat length of the pipe given above the dimension line, and the length with extra sock below the dimension line.
View 4 Replies View RelatedI'm looking for a way to explode a dimension. I've tried using the Explode() method, but it just results in an eInvalidInput error. Is there a way to explode a dimension into objects?
The reason for this is that I'm using Autocad Architecture and I'm auto-labeling and dimensioning some items I am inserting into the drawing, however the 2d elevation drawing tool in Architecture automatically ignores text and dimensions, so I need a way to explode these into lines so they will show up in the 2d elevation drawings.
I am trying to put dimension on drawing (which i got from client) but when i place it does not show up. I mean i select first object,second object then place but as soon as i place and release mouse its gone.
View 9 Replies View RelatedHow do I add a dimension so that it shows both metric and imperial, with metric first, but has the appropriate units after each. Ie. 1.0mm (0.039 in.)?
View 2 Replies View RelatedI need to routinely insert text into or near my dimensions but my dimensions need to be kept as basic dimensions meaning they need to have the box around them as in the picture. What I want to do is what the first dimension shows with the "2x" outside the dimension box but that first one is a combination of suppressing the dimension line and inserting a leader so the 2x will be within the line. Otherwise the normal dimension is what is shown below. How can I increase the line gap from the dimension options without 1) increasing the dimension box with DIMGAP or 2) inserting a line that's separate from the dimension itself or 3) exploding
View 4 Replies View Related