I am trying to put dimension on drawing (which i got from client) but when i place it does not show up. I mean i select first object,second object then place but as soon as i place and release mouse its gone.
View 9 RepliesI am using AutoCAd Architecture 2011. I want to draw a 3d box to a specific dimension while I'm drawing it, much like drawing a rectangle. After selecting the box command my command line reads as follows:
First Corner or [SHape]:
Second Corner or [SHape/Undo]:
Height or [SHape/Undo]:
I don't know how to draw my box to the exact dimensions while I'm drawing without having to go into the properties box after I draw the box .
Why the dimension is this big? My draw is in mm. I tried to change the dim scale but no success.
dim.jpg
When I upload a drawing from the internet I save it as a wblock.when I insert it into my exixsting drawing it is not scaled to the same dimensions as the rest of the drawing.
I change the units to the same as the drawing befeore I save it as Wblock. But Im still having this Problem.
I have a hard copy drawing in mm so i drew it in mm. Now i have to dimension it in inches. I have tried several things including opening a new drawing in imperial, changed the units, INSUNITS are set to 1.
View 9 Replies View RelatedThe diametric dimension on the right, dia. 244.9 isn't resembling the real dimension in the weldment.You see in the sketch of extrusion 2 that i gave an internal diameter of 245.
View 9 Replies View RelatedIs there any way to highlight certain dimensions in a IDW drawing (i.e. color the background of that text yellow)?
View 6 Replies View RelatedI am using Inventor 2013. For some reason I cannot dimension some of the model entities in the drawing views in an idw file. I can retrieve the model dimensions but it is usually easier to create the dimensions I need in each view. I can select the line, curve, etc. when dimensioning but nothing happens.
After I think about it. What I cannot dimension are lofts that I created with rails. These rails were made up of lines and curves, not polylines. How do I get the sketches for the rails I used for lofting to display in the drawing views so I can dimension those sketches.
I need to modify some of the dimensions (text only) in a standard template of outline drawing for different cases. I tried to identify the dimensions which need modification by using handle.
But after that i have no idea how to change the text in it.
I have a complete gearbox drawing from a previous work and I would like to use it again but with different dimensions.
If I edit the dimensions and enter different values its not enough because when I hit the inquiry tab and dimension, obviously it will be the old measure value.
My question would be how to change the whole drawing to a new dimension values? I think there is no need to redone the whole gearbox again with new dimensions. My drawing is in metric (millimeters).
I created a new dimension style in a drawing. But i can't find this new create dimension style in othes drawing. I am wondering how can i create my own dimension style and could be use in every drawing as my own style?
View 1 Replies View RelatedI'm using Inventor 2013. I created an assembly where I did a lot of top down modeling (meaning components in the assembly were created in the assembly. All but a handful of the components are adaptive to other components). When I went to make my drawings for having the components made, I started noticing that some of the dimension values were wrong. I could go into the model and verify the features, but when dimensioning on the drawing it would not match. Furthermore, this didn't occur on every dimmension on the drawing. Not even half of them were incorrect, but it only takes one to really mess up a part.
I've attached a screen shot of what I'm seeing. The 15.2 and 5 dimmension are correct, but obviously those don't add up to 31.37. I know I can manually override this dimmension, but only if I know to do it. I tried to do a drawing of another part in the same assembly and eventually found a similar problem.
Finally, I created a step file of the 1st part (to strip away the adaptivity) and when I created the drawing again, the problem went away.
My question is, is there something I did in the assembly / creation process that would have caused this?
I'm trying to dimension an ellipse in the Inventor Drawing Feature. I've attached the .idw files. (the .ipt is too large)I am aware that the ellipse doesn't have a constant radius and was wondering what is accepted practice for these dimensions?
I need to first dimension the external elliptical shape (which I'm struggling at), might just add a note.
Secondly I'm trying to dimension the mesh part, its not centrally align to the part and since I can't put a center mark on I'm not sure how I should dimension this...
My question is to find the dimension in the drawing area
for example
If we observe in the drawing left hand site we can see alphabets in the border area and number at top border area
if the dimension lies between "A" on left hand side and "1" on top border srea
then i want a message the dimension lies on A1
dimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
View 2 Replies View RelatedSo my problem is that I need to include a line on a part drawing that isn't related to the part itself. I need to be able to override the dimension of the line I sketched so that I can include it in my drawing and update the dimension without having to change anything else on the part.
Basically, I want an iLogic rule to overide a dimension, and I don't know how to do that.
I have recently drawn a steel construction, and I am now in the process of making the drawings. A problem that occurs is the length of beams used for bracing. When I click the two outer points, the lower dimension in the drawing appears. This is the length of the line between the two points. To be able to dimension properly, I have made a sketch with a straight line, which is perpendicular to one side of the beam. This has been used, with the point on the opposite side, to find the true beam length (and is showed as the upper of the two dimensions in the picture).
View 5 Replies View RelatedEverything I draw is metric. I've got my templates set up and all my paper space scaled appropriately. All dimensions are as they should be. The annoying thing is when I'm drawing a dimension, the tooltip shows inches and not mm. How to change?
View 3 Replies View RelatedI want to ask how to make the size for the angle in the distance between holes. i use the autodesk inventor 2013, I attach an example like this.
View 9 Replies View RelatedI was trying to reposition a retrieved dimension in drawing. I was able to position the text, however the dimension line however still stays in its default retrieved position. how I can reposition the dimension line as well?
Dim mydim As Inventor.ObjectCollection
Dim invDimConstraints As DimensionConstraints
Dim invDimConstraint As DimensionConstraint
invDimConstraints = invPartDef.Sketches.Item("MySketch").DimensionConstraints
[Code] ........
What's the easiest way to save a dimension style and open it up in a new drawing? I know that you can do it with the command "adcenter"
View 5 Replies View RelatedWhen I move any object using move command then dimensions are move with objects but dimensions are stretch and show as long extension line in the drawing.
I have checked DIMASSOC it is set to 2.
I am trying to dimension a 1/8" drawing (in model space) and the text height on the dimensions is so small it is not even readable. I have tried modifying the dimstyle to have an "Overall Scale" of 96 (under 'Fit') and a "Scale Factor" of 1 (under 'Primary Units') and vice versa, but neither is working. I have never had this problem before. I am working in AutoCAD Architecture 2010. Also, when i try to dimension this in paper space, the size comes out ok but it is saying a 6' line is 576'... I would rather dimension in model space anyway but what's up with this? I realize 6 times 96 is 576 but how do you get it to be the right length in paper space?
View 9 Replies View RelatedI am trying to dimension a drawing and have tried everything under the sun to change the text size but despite everything it keeps producing the text at a tiny size .
View 3 Replies View RelatedIs there a way to force Inventor to dimension without snapping to various Z heights within a drawing view? I have basic top and side views created however when trying to dimension overall lengths and widths i'm snapping to high and/or low points of the model and getting screwed dimensions.
View 4 Replies View RelatedHow do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies View RelatedWe have created one Style, but within this Style are two Dimension types (Dual and SIngle)
When a drawing from a model is created it defaults to the Dual Option and we can only select the Single Dimensions by individually selecting the Dimension and editing to Single Dimension, which can be time consuming.
Is there a way to select the Dimension type for the whole drawing?
I seem to recall being able to do this in 2013...
Say you've dimensioned something but end up wanting to change the dimension definition points...drag the end point to another location that you want dimensioned.
I thought it used to snap to a new location, but now it will not. I have to redraw the dimension (including all text I added).
Here is what I get when I try to move the dimension definition point:
Here is what I get when I try the auto-reattach feature in "repair". Still nothing to snap to.
I cannot edit a dimension that I add to a drawing, IV simply ignores my request when I select Edit from the shortcut menu. This is not a retrieved dimension. My only workaround has been to edit the dimension properties in the part file to display as I would like on the drawings.
I've checked the application options, under Drawing tab, I do have "Edit dimension when created" checked, yet IV does not display the edit dialogue box upon initial creation of the dimension.
I want to change some values in the default drawing template.
But doesnt succed to save it to an existing template
Like this picture shows about the precision
I have tried to use "Save Copy As Template" but the values goes back to the default settings
how to save dimension style settings to an template?
How do i increase the dimension text height in my drawing.When i go thro the styles and standards editor and increase the text height all the text in my sheet border also increases.Surely there must be a way to isolate the dimension text from the sheet text.
View 2 Replies View Related