AutoCad :: How To Remove Block In DWG
Feb 20, 2013I want to remove block from my drawing how can i remove unwanted block
View 9 Replies
ADVERTISEMENT
AutoCad :: Remove Block From A Drawing
Mar 25, 2012Is there a way to remove blocks from a drawing without having to explode or burst? I'm trying to clean up backgrounds for a hospital and every drawing is driving me mad! After I explode them, all kinds of new entities appear making the problem worse. There has to be a better way. I've tried bursting, but - same effect. On another note, my office is trying to move us to Revit, which appears to have a ridiculously steep learning curve.
View 9 Replies View RelatedAutoCad :: Remove Many Of Same Block From Drawing?
Feb 6, 2012I'm trying to use remove many of the same block from a drawing and know that I can use the quick select to `grab` the blocks in one go but only seem to be able to erase them. I could do with freezing them for later. Perhaps it might be better to move them to a new layer?
View 5 Replies View RelatedAutoCAD 2013 :: Remove All Of A Block Attribute
Nov 20, 2013I have a several drawings from an outside source. There are blocks in the drawing which I can not remove the attributes. I have tried exploding, erasing, and redefining block. This doesn't seem to remove all the attributes. That is I erase all the attritube that I can see while editing in place. When I save new defintion I have it replace existing block.One attribute remains.
I have tried to use Battman and resync. It allows me to remove all the attributes except one.Point is, I would like to keep the current blocks cleaned up in the drawing without having to go to each and put a new block and remove the old. Not sure of the origin of these blocks.I believe they came from an AutoDesk AEC source and may have been XREF into drawing.
AutoCad :: How To Remove Dynamic Block's Frame
Jan 27, 2012i have a dwg file, it has so many x-refs. And x-refs has so many dynamic blocks. As you know there is a frame around the dynamic block objets. But i have many many rectangles-frames that i want to remove..
I thought that if i set it's colour to black, i could ged rid off to see this ridiculously big frames. But i couldn't.
AutoCad :: Remove Permanently Inserted Block?
Feb 17, 2013How do I remove permanently inserted block?
View 1 Replies View RelatedAutoCAD Inventor :: Remove LBMass Text In Title Block
Sep 21, 2007How to remove the "lbmass" text that shows up when I add the Physical Property "Mass" to my title block? Inv. 2008.
View 4 Replies View RelatedAutoCAD 2013 :: Remove OVERKILL Functionality From Block Editor?
Aug 22, 2012Did Autodesk remove OVERKILL functionality from the block editor?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Remove Proxy Image From Block
Jul 31, 2013LISP application that will remove Proxy Images from inside a selected block?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Remove All Block Attribute Values
Jun 17, 2013I need a lisp sub-function that can empty all attributes of a specified dynamic block. The idea being that the specified block contains data that changes often and in order to repopulate the block's attributes with new data to replace the old I wish to just blank out the old data first, because it's possible that the new data may not utilize as many attributes and all of the old data must be removed.
The thing is the block I'm after is on several layouts, CTABs and they all need to be wiped clean.
AutoCAD 2013 :: Updating Block References Resets Block Table Selections?
Sep 4, 2012We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
AutoCAD 2013 :: Dynamic Block In Action Doesn't Reflect Test Block
Jan 24, 2013I am in the process of fixing one of our dynamic blocks. It's a fairly simple fix where there was a typo in one of the names of our items in the lookup that needed to be fixed.
I changed the name of the item in the lookup table. I went and did the test block and it seemed to work fine, but when I bring the block into a drawing, it reverts back to the old lookup as if I did nothing at all.
I made sure that the path was correct and I even just dragged and dropped straight from Windows Explorer to no avail.Does AutoCAD keep referring to the old block? Did I forget to change something else?
AutoCAD Architecture :: Explode Destroys The Small Block Inside Bigger Block?
May 30, 2012I have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies View RelatedAutoCAD Civil 3D :: Inserting A Block Deletes Points With Point Style With Same Block
Oct 16, 2013We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
AutoCAD 2010 :: Inserting New Block And Entering Attribute Data By Selecting Another Block?
Aug 13, 2012Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
AutoCAD 2010 :: Dynamic Block Grips - Block Does Not Change When Insert In Another File
Oct 28, 2013I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
AutoCAD Visual LISP / AutoLISP :: Removing Nested Block From Main Block?
Oct 3, 2013I get an AutoCAD drawing from my conveyor manufacturer who have buried a block (tagname) in all of their conveyor blocks.
The only way to remove them is to manually use BEDIT and erase the tagname block.
Is there a way through Autolisp to search all blocks in a drawings and if the tagname block is part of the definition of the conveyor block, erase the tagname block or redefine the conveyor block without the tagname block.
AutoCAD 2010 :: Convert Block Back To Title Block Or Border
Feb 15, 2012We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
AutoCAD Visual LISP / AutoLISP :: Retrieving Block Name Of Anonymous Block
Mar 8, 2013When dynamic blocks are inserted they're assigned an anonymous block name. I'd like to be able to retrieve the name of the parent block after selecting the block on screen using AutoLisp.
Need a bit of code that handles this?
AutoCAD 2013 :: New Block A Stretch Point Appears Even If Its Not A Dynamic Block
Dec 3, 2012my problem is whenever i make a new block a stretch point appears even if its not a dynamic block . also its not a stretch point, because when i click on it, it just move the block , and it always appear on the coordinates 0,0 it cause me a problem when I insert the block , autocad use this point as a base point , and its very far from the real block .
View 1 Replies View RelatedRevit :: How To Convert Existing 2D Autocad Title Block Into Block Template
Jul 24, 2008How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutoCAD LT :: Block Editor Saves Block But When Closing Says Changes Haven't Been Saved?
Mar 28, 2013I have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
AutoCad :: Objects Not Part Of Block When Moved While Editing Block In-place?
Feb 3, 2012When editing block in-place, not onely objects in the block, but also other objects (just drawn normal in modelspace), is affected by the commands.
View 6 Replies View RelatedAutoCad :: Attribute In Title Block Exists In Block Editor But Not In Project
Sep 6, 2012Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
AutoCAD Visual LISP / AutoLISP :: Block Insertion Routine Based On Block File Name
Apr 5, 2013Create a routine that looks for a block based on a portion of that block name, using a specified path or search path.
For example, block to search for is BLOCKABC123, so if someone inputs ABC or 123 as a block name, it will locate that block within that folder and inserts it into the drawing at a user specified location.
Ideally, if there is a check in that if it finds more than one match, then perhaps it flags or prompts you to choose 1, 2, or 3 option which block to use. But I can live without this special function if it requires too much time to code.
AutoCAD Visual LISP / AutoLISP :: Match Multiple Attribute Values From One Block To Another Block
Feb 12, 2012I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
AutoCAD Civil 3D :: Create Block With Attributes That Automatically Complete X / Y And Z For Insertion Point Of Block?
Feb 14, 2013Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
AutoCAD Visual LISP / AutoLISP :: Insert Point At List Block And Dynamic Block
Apr 18, 2013I am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt "
selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt))
wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
(vl-load-com) (defun c:pmb11 ( / sele cod bloque nbloque lista pt ) (prompt "
block: ") (setq sele (ssget ( List'(0 . "INSERT"))) Cod 0 )cod (1+ cod) (repeat (sslength sele) (setq bloque (ssname sele cod)) (setq pt (cdr (assoc 10 ( entget bloque)))) (command "punto" pt) );repeat )
AutoCad :: Dynamic Piping Blocks - Inserting And Linking A Flange Block To Pipe Block?
May 21, 2013I have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Insert A Block / Explode And Rename Nested Block With Suffix
Nov 30, 2012I have a block that i want to insert several times and revised each one to be different to do this i would have to insert it and rename the blocks that come in and then reinsert i would like to insert and have a lisp explode the main block and rename the other 2 blocks with a suffix at the end depending on how many times its in the drawing... can this even be done? My original block name that will be first inserted is "BENT PULLEY NOTES" it needs to explode after i drop it in and then there are 2 blocks within that called "Bent Pulley" and "Bent Pulley DYN" that i was hoping to keep the names but add a number at the end depending on how many are in the drawing already...
here is a lisp that i have found... it would work if i didn't have nested blocks and only wanted the one block to be insert and not explode...
(defun c:Test (/ e i name Bname )
(setq e nil)
(command "_.-insert" "Drawing1.dwg" pause "" "" "")
(if (setq e (entlast))
[Code] .......
AutoCAD Dynamic Blocks :: Actions And Parameter Grips Obscure Drawing-block In Block Editor
Mar 28, 2011My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.