AutoCad :: How To Adjust Dimension Text
Nov 20, 2012When I draw something and try to dimension it.I can not see my text (the dimension) they are too small . How can I adjust the dimension style etc.
View 5 Replies
ADVERTISEMENT
AutoCad :: How To Adjust Dimension Line
Feb 3, 2012how I can adjust my dimension line to the drawing with the white background ?
drawing.jpg
AutoCad :: How To Adjust Linear Dimension
Dec 20, 2011Cant seem to get my lookup table to adjust the linear dimension. Please see attached the block.
View 1 Replies View RelatedAutoCad 2D :: Get Dimension Text That Pull Out To Side Closer To Actual Dimension Marks?
Jun 2, 2011I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedAutoCad 2D :: Change Dimension Line Length When Text Is Outside / Beside Dimension?
Feb 21, 2013Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedAutoCad :: Dimension And Change Oblige Angle Text Of Dimension
Dec 29, 2010every one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedAutoCad 2D :: Angle Dimension With Text Below Dimension Line?
Jul 29, 2011When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View RelatedRevit :: Adjust Length Of Tick Marks Used In Dimension Strings?
Jun 15, 2012Is there a way to adjust the length of the tick marks used in dimension strings? I'd like something other than the supplied Diagonal 1/8" or Diagonal 3/64" options.
View 1 Replies View RelatedAutoCad 2D :: Add Text In Dimension Below Dimension Line?
Apr 25, 2008my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
CorelDRAW Graphics Suite X6 :: Dimension Tool - Adjust Distance From Object?
Nov 6, 2012dimension tool.jpg
See the figure below.
Is there any way to adjust the dimensions, when dragged, with regular distance from object?
See differences by red arrows. The intention is that dimensions keep a pre-set regular distance.
Revit :: Add Dimension Parameters Inside Curtain Panel Tag Family To Adjust Tag Position?
Feb 15, 2014How can I add dimension parameters inside a Curtain Panel Tag family to adjust tag position?
View 2 Replies View RelatedRevit :: Dimension Text In Line With Dimension
May 30, 2013is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View RelatedEdge Animate CC :: How To Adjust The Position Of Text In Order For Animation Text To Be Visible
Mar 3, 2013I have created my Animation:
The stage size you see above is H: 400px, W: 550px.
I would like for the stage to be smaller, say H:50px./W:400px
Ok so if I change the size of the stage the animation text will not show, so I need to adjust the position of the text in order for the animation text to be visible, but in doing that, I am disrupting the timeline and the animation goes all funny, is there another way of doing this without disrputing the timeline?
AutoCAD 2010 :: When Text Is Moved Leader Of Dimension Text Disappears
Feb 13, 2012(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
AutoCAD .NET :: Adjust Attribute Text Width?
Jun 25, 2013Is there any way to adjust width of attribute text so that it is not out of contained block. The attribute is set at left alignment and width factor <=1.
View 2 Replies View RelatedAutoCAD LT :: Printing Half Of Text And No Vertical Dimension Text?
Jun 30, 2011My office has two desktop printers, both HP. Our Officejet 7000 wide format prints great. On the HP Officejet 7500, we are often seeing text printing errors. It will not print the text from vertical dimension strings, and cuts off some M-text at an imaginary vertical line in the middle of the text box. PDF's of the same drawing look fine. Is this a printer driver issue? Is there anything I can do within AutoCAD?
View 3 Replies View RelatedAutoCAD Inventor :: Changing Text Height Of Dimension Text
Sep 13, 2013I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies View RelatedAutoCad 2D :: Vertical Dimension Text Gets Bolder Than All Other Text When Scaled Down
Mar 5, 2013We have detail drawings that contain horizontal and vertical dimensions. They're drawn at full scale in model space and saved as individual drawings. We then insert them as blocks onto a sheet in paper space, scaling them down to 1/2", 1/4" scale ETC.
Here's the problem - all the vertical dimension text appears bolder than everything else when scaled down. Horizontal text is just fine, diagonal text also looks a little bolder though.
AutoCad :: Adjust Scaling But Text Didn't Follow
Aug 23, 2011Having problems importing spreadsheet. The scaling of the table is off. The table comes in really small. I tried adjusting the scaling but the text didn't follow.
View 0 Replies View RelatedAutoCad :: Text / Dimension Showing Old Text When Marked
Oct 20, 2011When i mark Text/Dimension/Multileader and such in autocad 2011 LT, i get an issue, which i have tried to shown on the picture.The problem is that when i mark them, they show the current size they have, plus any other size they have had (Annotation it seems).
I Make a dimension. The overall annotation scale is 1:10. Now i change the overall annotation scale to 1:100. Then i set the overall annotation scale back to 1:10, i click my dimension, and it now shows how it currently looks, plus how it looked when the annotation scale was 1:100. This way i end up with every text object showing up 5 times when i mark them.
AutoCad 2D :: Only Text Moves In Dimension Text Edit?
Apr 22, 2011Home and work computers act differently when I initiate the dimension text edit command. One moves both the text and the dimension lines and the other only moves the text. It doesn't appear to be the dimstyle so I am wondering if it is a setvar.
View 2 Replies View RelatedAutoCad :: Text And Dimension Text Become Invisible?
Aug 25, 2008i'm having some problem when I preview my drawings for printing. When i'm zooming in the drawings in the paper space, the text and dimension text become invisible but when i zoom it out again, that the drawings become a bit smaller, i can see the text. by the way i'm using Vista as my OS.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Adjust Column Width To Length Of Text
Apr 27, 2012Several times, we generate a drawing, and the text widths in the columns vary greatly. Some have text that is ten characters long, and others have thirty-plus characters.
Is there a way to be able to select the table (or perform the command to all tables in the current layout) and have each of the columns expand to the appropriate width, that depends on the longest string of text in that column, for each column. The problem I see, is that some tables have two columns, some have six, and of course other with any number in between. The same is also true for the amount of rows.
AutoCAD LT :: Text Editor Missing Ruler To Adjust Width And Length Of Mtext Objects
Feb 17, 2012I lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
AutoCAD 2010 :: MText Area - Adjust Single Line Text So That End Of Sentences Make Angle
Apr 5, 2013I use Mtext quite a bit and I am trying to convince others in the office that it's a good thing (versus single line text in long paragraphs). One of their concerns in the shape of the Mtext. For instance, when you use Mtext, you type into a nice rectangle that you can change the size of. What they have to do on occassion is instead of having a nice rectangle of text, they have to make it like a triangle. So in this case, single line text can be adjusted so that the end of the sentences make an angle.
Is there a way to do this using mtext? Or is there an lsp that will work?
GIMP :: How To Adjust The Location Of The Text
Jul 22, 2012I've been trying the new 2.8 version of Gimp and find I don't like it. Is there a way to disable some of the new features. For example I don't like the use of group layers. I've gotten used to just seeing all of my layers in a single list and being able to move each one independantly if necessary. Is there a way to disable this feature? Second, I really don't like the need to "export" just because I need to change the file type. I'd rather just save in the file name I need it to be in as it has been done in past versions, this ads extra steps for simply saving a file. Can this also be a disabled feature so that I only have to click save and tell gimp what file to save it as? Third I don't like that the text box shows the font, size etc when on the workspace. It gets in the way when I'm trying to adjust the location of the text. I rather it just have the box and control the font size,color etc from the tool box. Is this a feature that can be disabled as well? In otherwords is it at all possible to revert those features to what it was in 2.6 as far as UI. If not I think I'll have to reinstall 2.6 until I have no choice but to update it and just live with these features despite the fact that they actually make what I do problematic.
View 2 Replies View RelatedAutoCAD Inventor :: Add Text Before Dimension
Sep 21, 2011How do you add text before a dimension in the idw environment? For example, I have a dimension that shows 40".... I want to add text before it to say something like.... " 8 Spaces at 5" = 40" ".... The 40 would be the default dimension value, everything else I want to add to the dimension... I have added tons of text information behind default dimension values, this is the first time I need to add the text before the value and cannot figure out how to get it to work...
Example:
oLinDim(3).Text.FormattedText = "8" &" SPC'S AT" & vbCrLf & "5 = "
this adds text after the default value of 40...
AutoCAD .NET :: How To Get Bounding Box Of Dimension Text
Apr 13, 2011I wrote a dimensionroutine and want to put the dimensiontext on a home or upper position depending the space the dimensiontext needs and is nearby the last created.
With the boundingbox of the dimensiontext I hope to calculate if the dimensiontext will fit between his two dimensionblocks
AutoCad :: Dimension Text Is Not Displaying?
Sep 3, 2011This used to work, then my computer dies and AutoCad was reinstalled. I am trying to dimension some cut-outs in a 19" rack panel. I can dimension them, it shows the correct dimensions but then when I hit enter it wont save the dimensions. I've gone into DIMSTYLE and everything looks fine but I cant get this simple task to work.
autocad problems.jpg
AutoCad 2D :: Dimension Text Cannot Be Scaled
Oct 30, 2013Background Info: I am fixing about 10 drawings with to our clients standards, which are no where close to normal drafting standards. This client likes their titleblocks droped in to model space and scaled to fit, unless it has multiple scales on the drawing then it's O.K. to do it the correct way. I know right!!
Anyway I am trying to get some drawings ready for IFC.
The problem: The person that set these dwg's up did the dimentions in paperspace and now that I have them in model space I can't get the text size to change. I can't change them in dimention style format box because it is grey'd out. I tried to change the overall scale in the dim style box to no avail. I also tried highlighting and changing the text size in the properties box but alas that to failed.
AutoCad 2D :: Overwriting Dimension's Text?
Nov 25, 2013I need to overwrite the measurement of quite a lot of dimensions. I do this by double clicking on a dimension and entering properties and writing the text there. However, this takes forever and I need greater efficiency.
View 9 Replies View Related