AutoCad :: Geometry Properties / Display Position Using First Point?
Sep 13, 2011If I create a Box using two points, how do I display the position using the first point?
View 5 Replies
ADVERTISEMENT
AutoCAD 2010 :: Command Prompt Position Display At The Bottom Of Main Display
Jan 23, 2013After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedAutoCAD LT :: 2014 - Properties Box Does Not Display Properties Of Selected Object
Jun 6, 2013I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
AutoCAD .NET :: How To Access Point Position Within Point Cloud
Mar 29, 2010AutoCAD 2011. C#
How to access the point positions within a Point Cloud using C#? Or is this function not provided in the managed class?
AutoCAD Civil 3D :: Properties / Quick Properties Won't Display?
Sep 10, 2013For the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
AutoCad 2D :: How To Get Geometry Information In Properties
Apr 26, 2011 once I've set an origin, how do you get the geometry info in the properties to show the coordinates from that origin? what I want to do is set an origin and then find relative points from that origin. What are the ways to do this? On ProgeCad I would just set an origin and then if I viewed the properties of say a circle, it would tell me the x,y,z coordinates from that origin but I can't seem to do it in AutoCad.
As you can see from the picture, what I did was set an origin at the on point. Then I selected the arc for which I want to know the coordinates. But as you can see in the properties it says the x,y are like 566,567mm, but clearly if I draw lines to that point and measure the lines it is only like 1.00,0.70mm.
AutoCad :: Get Area Under Geometry In Properties To Give Sqft?
Dec 20, 2011how to get the area under geometry in properties to give me sqft? It used to give me sqin and sqft and now (in one particular drawing) it will only show up as a sqin number. It doesn't seem to matter what I measure in this drawing...including new geometry that I add to it. (I tried drawing a rectangle in this drawing to see if my new geometry would give me a sqft number)
View 2 Replies View RelatedAutoCAD 2013 :: Properties Inspector Geometry Options Greyed Out
Dec 13, 2012Say I click on a line, and then go to the properties inspector to adjust its length. When I scroll down to "geometry" the options are greyed out and I can't adjust them. (see attached image)
It was working fine, and then the other day they were randomly greyed out, and I cant figure out how to get it back to normal. I don't know if I accidentally changed some setting or what, but it's like this on every object I click.
Maya Modeling :: Reset Transforms Of Object Moves Geometry To Frozen Position
Oct 15, 2013So, when I reset the transforms of an object, it moves the geometry back to the frozen position but the pivot point gets places at the world origin.
That can't possibly be what is supposed to happen, is it?
AutoCAD Civil 3D :: Grid At Vertical Geometry Point?
Oct 9, 2013Is it possible to have a profile view grid line at a Profile Vertical Geometry point?
Civil 3D 2011 & 2013
ArcGIS 10.1
AutoCAD Civil 3D :: Expression In Horizontal Geometry Point
Aug 9, 2013I'd like to label profile elevations at horizontal geometry points. I accomplished this with a profile reference. Essentially labeling bottom of curb at pc, pt, mid, and pi, and would like to get and expression to add the top of curb, but under hor. geo style expressions you cannot pickup pgl data and PGL style expression are not loaded in the hgp data.
Note: Its all Resistentialism, so keep calm and carry on 64 Bit Win7 OS.
AutoCAD Civil 3D :: Alignment Label Expression For Geometry Point
Oct 24, 2011How to create an alignment label expression for Geometry Point that will show the delta angle rather than the instantaneous direction or perpendicular direction?
View 1 Replies View RelatedAutoCAD Civil 3D :: Duplicate Geometry Point Labels In PV Bands
Apr 29, 2012I do know that tere is supposed to be an algorithm in C3D that will recognise when two geometry points are coincident on a profile view...that is, say a profile vertical geometry point happens to occur on a major station (for example).
I have never seen this actually work. When I have this situation, the labels stagger and I get two columns of identical data on my PV.
I know I can remove individual labels bY CTRL+select and eIther erase or turn visibility to false, but I would rather that C3D figured it out for me and removed the duplicate data.
Viideo link explains what I mean..
[URL]....
C3D2011
Win XP
Dell Precision t1600 4Mb RAM
C3D 2011, Win 7, Dell M6500, 8Gb RAM
AutoCAD Civil 3D :: Geometry Point Labels - Text Style
Jan 21, 2013I am in the process of modifying our current company standards to conform to another set of standards. The main change is switching from "simplex" font style to "Tahoma".
Simple in theory but problematic in execution, our main alignment label style "GEO-LABL", used for P.O.T, PC, ect. utilizes an underlined reference text object in order to control the length of the line under the call. The base insertion places the call perpendicular to the alignment, when dragged to the left or right it switches to stacked text plan readable. Works like a champ with the "simplex" text style - 1.jpg see attached.
Now simply changing the font to "Tahoma" - 2.jpg the larger you make the text the larger the gap.I am trying to stay away from adding a line for the underline due to the difference in lengths needed when the call gets longer or shorter based on alignment name or stationing.
AutoCAD Civil 3D :: Profile Label - Geometry Point Text
May 10, 2012For composing a profile label, I can't find the option for Geometry Point Text, which would use our abbreviations under the drawing settings. It is available for alignments but not profiles. Currently have it text compenent being labeled with PVC and PVT, but I had typed that in.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
AutoCAD Civil 3D :: Profile Setup - Anchored To Horizontal Geometry From Certain Point
Sep 26, 2012is there a way to set up the profile so it is anchored to horizontal geometry from certain point. that way when i change the alignment in the middle it won't cause profile to be shifted because station changes (length changed) while the vpi stations stay the same as before.
i can make a program in .net to specify a station and move all the vpi station by that amount which can be obtained easily by taking the length before you modify minus length after you modify.
Pretty common problem. it's not that hard to do in really the logic is defined. i have this alignment that's 60km long that's only one portion. hecka lots of horzontal curve and vertical curves. over 100.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
AutoCAD Civil 3D :: Display Alignment Position Information On Section View
Mar 17, 2013IF it is possible to display the alignment/profile position (X, Y, Z) on each section view?
Refer attached for example.
GIMP :: Layer Properties - What Is The Rotation And X / Y Position
Jun 30, 2013Is there a way to find out the position of a layer after you move it from the starting point of 0,0 and 0 rotation?
I'm trying to line-up two images and the bottom layer is the reference image so I move the top layer in the x,y direction and rotate the layer until it looks good. But instead of saving I want the new x,y location along with the rotation number to enter into an Imagemagik bash script.
I'm using GIMP 2.6.11, but will update to 2.8 if necessary.
GIMP :: Layer Properties - What Is The Rotation And Xy Position
Jun 30, 2013Is there a way to find out the position of a layer after you move it from the starting point of 0,0 and 0 rotation?
I'm trying to line-up two images and the bottom layer is the reference image so I move the top layer in the x,y direction and rotate the layer until it looks good. But instead of saving I want the new x,y location along with the rotation number to enter into an Imagemagik bash script.
I'm using GIMP 2.6.11, but will update to 2.8 if necessary.
Revit :: How To Put Properties / Project Browser To Default Position
Feb 11, 2014I have re-arrange the Properties and Project browser from their original position, I cannot figure out how to put them back in their default position , I'm having hard time navigating thru my project because of this mess.
See the attached picture.
AutoCAD Civil 3D :: Display Attributes In The Properties?
Mar 2, 2011I recently upgraded to a new computer and CAD Civil 3D 2011. I have always had it set up to when I selected a node the attributes (description, point number, etc..) for it would show up in the properties. Now I can only view them by double clicking the node. Is there a way to get them to display in the properties again?
View 9 Replies View RelatedAutoCAD 2010 :: Display Dimensions In Properties Box
Jan 24, 2012I'm trying to figure out two things that have changed:
1) Lets say i create a polyline, lets say its 15 inches long. I used to be able to click on it and have the length show up in my properties. it no longer does that.
2) Lets say i create a polyline, it's green and has a dot pattern. I decided i wanted to change it to yellow and hidden pattern. I can no longer select the line and change it under the properties, it will change it in properties, but not on my screen. then when i draw a new line it will be yellow and hidden. I end up having to matchprop to make it work.
AutoCAD Inventor :: Mass Properties Will Not Display In Text Box
Jul 9, 2012I'm having trouble getting mass properties of an assembly to display in an .idw. I've tried it 2 diffent ways, custom properties-model "Totalmass" where I type the mass and physical properties-model "mass" where it's automatic with update.. Nothing shows, not even N/A, but in another idw (different assembly) it works. Both text boxes are saved within a sketch that is part of a template. Both idw's use the same template. If I place text on the drawing it self it works.
IV 2012
Vault Collaboration 2012
AutoCAD Architecture :: Display No Selection In Properties Palette
Oct 27, 2010i got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
View 5 Replies View RelatedAutoCAD 2013 :: Hatch Do Not Display During Pan And Match Properties
May 3, 2012Why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display but when i exit the command the hatch is there. the problem is you cannot match the properties of from one hatch to another.
This happens in all drawings!
AutoCad :: Display Attribute Properties To Text In Drawing?
Dec 29, 2011I've a few points with some attributes (select point,properties and you see the different attributes of this point), one of those attributes is a textstring. It has a value (Dreumel). This textstring (value) is what i want to see and put in to the drawing. I want to display this value See the attachment.
View 1 Replies View RelatedAutoCAD Map 3D :: Quick Selected Blocks Don't Display But Their Properties Do
Oct 30, 2012I am trying to get back some of my work that was "lost" when a crash accured. I had 16 blocks (all the same) inserted into my map at the correct locations. I recovered the drawing but noticed that the blocks weren't displaying. I conducted a quick select for the layer which they're on; it stated 16 items were selected (but they are not displaying). While they are still "selected" I checked the properties & it stated all the correct information (quantity, block name, color, layer, scale, etc...). I made sure all layers associated with the block were not frozen. So it's acting as though they're still in the drawing, but aren't displaying...
View 1 Replies View RelatedAutoCAD 2010 :: Hatch Do Not Display During Pan And Match Properties
Mar 11, 2012why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display or miss its visibility but when i exit the command the hatch is there. the problem is you cannot match the properties of from one point to another.
View 1 Replies View RelatedAutoCAD Civil 3D :: Point Group Properties
Jan 3, 2013I know that there used to be a way in land desktop to change an entire point group to the same layer without having to do each point separately. How to do this in Civil 3d 2011?
View 3 Replies View RelatedAutoCAD Civil 3D :: Point Group Properties
Apr 23, 2013I have a bunch of culvert points in my drawing and I would like to include all of the in the same point group. They all have CUL in the raw discription but some are CUL 0.3 INV, CUL 0.4 INV, etc, etc.
Is it possible to group all of these by just using the CUL somehow so that I don't miss any?
AutoCAD 2010 :: Properties Palette Doesn't Display Linetype
Apr 8, 2013My properties palette doesn't have a field for linetype? I swear there was one there previously (under the general section)?
View 4 Replies View Related