Every layer has turned to white. The layers have colors set to them and everything is set to color by layer, but everything turned to white. It happened either after I printed or exeted the layer dialogue box, I can't recall. How can I get things to go back to show the colors they are. Oh and I'm using AutoCAD Architecture 2012.
View 7 RepliesEvery layer has turned to white. The layers have colors set to them and everything is set to color by layer, but everything turned to white. It happened either after I printed or exerted the layer dialogue box, I can't recall. How can I get things to go back to show the colors they are.
View 1 Replies View RelatedThe layer is turned off but the table is still turned on!
I’m wondering how come the layer in which the table exist is turned off while the table is still turned one!
The screenshot and the file are attached.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I've locked a layer and this one went off, too. This is AutoCAD 2010, it's because the program?
I want my layer ON but locked, what can I do?
I have a plan view of a residential building. I want to remove some columns. I may need them later so I don't want to delete them.
I want to move them to a new layer (layer name: hiddenObject) and turn this layer off to unshow them.
When I move them and turn that layer off, first, the color of those objects didn't turn to layer's color and second they don't disappear.
What is wrong with my procedure?
So... every layer has to be turned on and thawed? But that's the direction things seem to be going. If I want to see my contours, for example, all layers associated with them must be on and thawed. Yes? No?
This makes drafting and designing more difficult and it unnecessarily clutters the screen. Once I'm done creating a surface, for example, I don;t want to see the intermediate entities again (unless I need to make changes). All I want to see is the finished product that will appear on the plans, i.e. contours, etc.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
For some reason points are still visible when the layer they are on is turned off. Also the layer is green but the point is red. Color is set to ByLayer.
View 4 Replies View RelatedI just had C3D 2013 reinstalled on my LT and having a surface visibility issue. This may be just a command setting issue but I have a surface and created it on a particular layer that I can't make invisible.
Then I turned that layer off so I could work on other things. Now when I do a REGEN that surface becomes visible in my drawing yet the layer identified in its properties is turned off.
If I got to VIEW and ORBIT the surface disappears until I stop rotating then it’s visible again. I like to control visibility by turning layers on or off but this isn’t allowing me to turn it off.
If I make the surface layer current and do a rebuild the surface moves back to that layer and I can then turn that layer off to make the surface invisible.
Why is this surface visible when its layer is turned off?
Is there a setting somewhere that will allow you to turn off a layer automatically when another layer is turned off?
View 1 Replies View RelatedI have all my dimensions on a single layer but when that layer is turned off, the nodes for those dimensions still appear and are selectable. I looked through the system variables and couldn't find a setting that controls this. How can I prevent the display of the nodes?
View 2 Replies View RelatedMy 3yo son got on my computer and somehow changed over 5000 images in my lightroom catalog all to black and white! How do I un do this?
View 2 Replies View RelatedI was working with a document in PS and I must have inadvertantly done something to turn my background sceen to black. How do I return it to the standard white?
View 2 Replies View RelatedI am creating an image, mostly text and color. I want to create words with letters that have been turned cw and ccw, alternating. After that, I plan to flood fill the words. Unfortunately, I get some white inside where I flood filled.
View 14 Replies View RelatedI have several paperspace tabs on my drawing. When I create a new layer on the drawing, I have to go to every tab and viewport to turn on or off the new layer. Is there a way to create a layer that is turned off in all the drawing viewports and tabs. Then, I only have to go to the paperspace tab and viewport I want the layer to be seen and turn it on.
View 1 Replies View RelatedI shot an event for a couple (a reception) and I didn't have my gray card so I set my Canon 5D mkII on auto white balance (shooting with a Canon 24-70 2.8 and a Sigma 85 1.4). As you'll see from the two example photos - the shots taken in the venue lobby looked fine, but the shots from inside the event itself were amazingly saturated. The room had a ton of very bright uplighting in purple and pink - the shots looked fine in the viewfinder, but once I brought them into LR4, there was a nearly complete purple/pink cast over everything. Setting the white balance in LR to auto, tungsten, flourescent - nothing worked. Adjusting the temp sliders - only slightly better. Reducing vibrance and saturation useful a little more, but I'm really having a hard time finding a fix!
View 6 Replies View RelatedI added an Axis FX to the clip on the timeline and entered the Editor. Everything looks fine. I see the clip loaded above the control parameters. The "Layer" button is turned on. Stabilizer/Track is set to Track. When i click on the Stabilizer button to enter the tracking editor, I see the tracking box on a black screen, the clip is not visible anymore.
View 2 Replies View Relatedi have a problem and it's driving me nuts. I have some corel files with print grid layer button turned on and it's impossible to turn it off.
This have a secondary effect and it's corel hangs up when i try to print the file, start to make the "previous checkings" and never ends.
I have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
View 4 Replies View RelatedI am trying to draw some red signs with white lettering, but my text is always black in paper space whether I set the text layer color to black or white. How do I make a white layer in paper space?
View 2 Replies View RelatedA friend had an image created, of a star, and cannot get hold of the person who created it. She's asked me but i have a problem, how to remove the background so you just have the star so that you can layer it on another background? I tried this a few weeks ago, changed it onto a transparent layer. Weird thing is when you put it onto another background, the transparent layer suddenly changes to a white background!
View 6 Replies View RelatedThe modal dialogue for Black and White has the "Colorize" option and for that "Hue" and "Saturation" sliders.
But Black and White as an adjustment layer in the adjustments palette does NOT offer the Saturation slider. At least not in my CS4 Extended on Win XP. There is the targeted adjustment tool (TAT), but it changes color, not saturation.
If you wan to use duotone to give that depth and vide variety of tones you cannot use the BW adjusment layer correct?
Because you need to start with a greyscale to get to duotone, correct?
I am trying to make a black and white image but leave certain aspects of it in colour. I did this yesterday by applying a black and white layer and then using the eraser to get colour back. However, this no longer works for some reason. I have also tried to use the history brush tool but that doesn't work either. I'm kinda a newbie so I think I did something last time that I'm not doing this time.
Running CS3 on Mac OS X.
I have a picture of a camera, where I want the camera to remain the block colour that it is (grey), but somehow erase the white-filled background to the image, so that it is transparent.
I will explain I little more by use of pictures...
-looks fine, but when I change background to red;
I just need to get rid of the white in the background of the camera layer!
how to combine three layers, each a different color, into one layer that comes out white.
I start with three layers, one pure red, one pure blue, and one pure green.
How do I combine them into one layer so it comes out pure white?
When i select a shape layer there is a white border to show its been selected. Is there a way to turn off this feature. I don't remember it present in previous PS versions.
View 9 Replies View RelatedI just installed PS CS6 and when I apply a layer mask to a layer I can paint black to hide the layer, but when painting white to restore the layer there is no effect. White paint will not restore the layer or modify the mask at all. The black paint works as usual to hide the layer, but how do I restore an area in a layer mask if not painting white?
View 2 Replies View RelatedI am looking to change a color logo to bw. I wanted to use the black and white adjustment layer but the option is greyed out. Is there a step I am missing? The file is cmyk and is 8bit. I am using PS CS6. What do I need to do to make this option available?
View 3 Replies View RelatedHow do I change the default settings for the layer mask, as I'd like to swap black and white color.
View 3 Replies View RelatedThere is a photo I've downloaded from the Internet that is by a photographer who shoots in Black & White. However, when I print out the photo it comes out sepia. I tried adding a Black & White Adjustment layer, but when I go to click on the button in the adjustment palette it's grayed out. I've tried this on other photos of the photographer and does it fine.
View 12 Replies View RelatedI have an image of a dog that I'm editing. I took the photo in a studio with a white backdrop. I want to remove a shadow that is behind the dog so the whole background is white. I do not want to lose the detail in the fur of the dog. I've tried doing a mask layer with making the background white. I've also tried the dodge tool. I've tried the selection tool but it look out?
View 4 Replies View Related