AutoCad :: Ellipse Size - Determine Size Of Spar Hole For Airplane Wing
Dec 17, 2011
I have more of a geometry question, rather than CAD question. I need to determine the size of a spar hole for an airplane wing. The wing will be cut out of foam with a hot wire. There is a round spar hole in the wing that runs from the root to the tip on each wing half. A carbon fiber rod goes through it. Seems easy, but the wing is swept back 35 degrees, so round hole will actually be an ellipse is when it exits the root and tip. The hole needs to be 5mm. The ellipse will be 5mm tall, but how do I figure out how wide?
I have a picture of an airplane and a company logo. I need to put the logo in such a way that it looks as if it is painted on the wing. For that I need to twist it, rotate it and somehow curve it. I only know how to do the rotation but not the rest.
I am linking an example file with the airplane as the background and the logo as a separate layer.
is there any tool in inventor that can determine size of louver or quantity of louver base on heat generated?
we are designing a sheet metal box. we need to find out how many louvers we need.
Autodesk Inventor Professional 2014 Autodesk Product Design Suite Standard 2013 Microsoft Office 2007 & 2013 Windows 7 64bit Synergis Adept 2013 Visual Studio Express 2010
How to display the annotations properly. Perhaps this may just be a display or view setting but I beleive I have checked them all at least 3 times =).
Even in the video he explains all the things explained here but does not explain exactly how to make the dims and ext lines notate and display properly, in model or paper view (view port). I have tried many ways to create a view port in paper space and annotation several dimensions. I constantly get different text sizes and ext line scaled differently within the same view port.....even after I have locked it.
I am also confused about notating dims in the model space within the paper space view port vs on the paper space outside of the model space view port? Perhaps this has something to do with my issues?
Again it may be because I don't understand another function/setting impacting this well enough yet?? I have tried/used every variable in the Dimension Style Manager on the Lines, Text and Fit tabs to no avail.
I want to determine the size of a (non-dynamic non-annotative) block definition (BlockTableRecord). Does a block have a boundry or limits? For example, if the block would contain a simple square, the size of the block would be equal to the size of the square.
once i was reading an adobe pdf "How to get better performance in photoshop cs5" - that was in 2009 or 2010, and may be outdated, but there was a calculation method to determine the size of a scratch disc. (similar calculation see below, if i can remember right)
i am asking myself, how can i determine the correct size of an external SSD-scratch disc, only used by photoshop (completely empty):should i buy a 128GB or 256GB or 512GB SSD which is only reserved for photoshop?
basic question 1 : i guess i should avoid to set the internal SSD as photoshop scratch disc, as it slows down everything?
basic question 2 : in sense of maximum performance: better buy an external USB3.0 or thunderbolt SSD? will photoshop really use the extra thunderbolt speed when swapping data?
secondary question:
can i calculate the size regarding my daily working habits?
i am mainly working like this:
- with my imac 27" late 2013 with 32GB RAM and 256 GB internal pci-e SSD (800 MB/sec), which will stay always half empty for performance reasons. - OSX 10.8 mountain lion and 10.9 mavericks soon - photoshop cs5, cs6 and cc (always without extended) - 8bit and 16bit mode - only RGB - with latest phocus/Hasselblad and canon RAW Files which produce a basic .psb document at ... - 10.000 x 7000 px at 300dpi
[code]....
i wonder how to calculate ?
for example:
10.000 x 7000 px at 300dpi needs for one image layer at 16bit: 2GB RAM in photoshop cs6 or cc (just as a number), this may be wrong so lets take 2GB RAM and multiply with 10 image layers in my .psb file (16bit) = 20 GB RAM, and multiply with 20 adjustment layers (guess they need less ram, for one lets say 500MB) = 20GB + 10GB = this 16bit .psb layer file would need 30GB RAM, so when i have 32GB in my imac, i set cs6 or cc to 70% ram usage, it misses at least round 8-10GB RAM > can i guess that photoshop would swap these 8GB onto my scratch disc? or do i miss something important in my thinking?
I'd like to draw a box around some selected text (a textRange), however I can't figure out how to detemine the size or position of the text. The overall size of a textFrame is possible to find (not sure about position), but when you've got just a few characters selected I don't see any way to get the size or position.
In my workflow i always use a wireframe to do my design. I always try to put all the information necessary on that wireframe so that i don`t get myself lost in my own designing. That includes also the position of the holes that will be put on my structure.
To ensure that i have, later-on, no error. I try not to do anything adaptive. To make my holes without projecting those points, i use bolted connection. Before, when i was using that function, for the same sketch layout of a bolt pattern that i made, only on one member those holes where made. So i was forced each and every time to use that function as much as i had members to put those holes in.
Now with the new patch, i was happy, for some reason the holes where appearing to the other members. But Some time later, i realized that even though the holes where made, It wasn`t at the same sizes!!!
I have just upgraded from Elements 6 to Elements 11.
All my scanned 35mm images & digitals from my DSLR are cropped to my prefeered 3000x2000 with a res of 300 I can find it in the 'quick' section, but not in the 'expert' In the 'expert' section I found the clone tool I use a lot in E6, but its not in the 'quick' section To make this all happen I often need to correct the horizontal in my old 35mm images; i cannot find this either.
I need to make the hole table origin symbol bigger to stand out on the drawing I am doing, I've looked around but can't see how to modify it's size, how to change it's size ?
Inventor 2013 SP2 Product Design Suite Ultimate 2013 64-bit HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL) Anthony Goodwin ~ Cad Manager/Senior Designer Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
Is there a way to default to a standard hole size when starting a new part? ie. If you mostly place 10mm dia holes can this size be configured to be default in lieu of 3mm on the hole dialogue box.
Our supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
when I create a template, and start dimensioning, the font size are always set to the default (.2) is there a setting to choose to make the font size relative to the size of dwg so that I do not have to increase the size of the fonts each time I do a dimension or any text.?
how do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
When I have an PSD icon set and I want to size a layer to a size that looks good. How do I see the dimentions of that layer so that I can select another layer and make it the same size.
Bristle brushes have an option near their size sliders named "restore to original size" ... but for some brushes, this option is resetting brushes to another size other than the original size appearing on the brush swacthes.
I'm trying the trial version of Photoshop CS6, and I'm wondering whether or not it's possible to change the length of a shape with the amount of text entered into it, with the text still being editable? For example, if I had typed in 'hello', the size of the shape should be just big enough for the text to fit inside, without me having to change anything. On the other hand, if I typed in 'good morning', would I be able to make it so the size of the shape would change for the text to fit without having to use the transform tool?
I'm trying to make annotations for a video, and it would be annoying to have to transform to the correct measurements every single time.
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
I create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
can a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.
such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?
My picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
I am checking the size of a photo as it needs to be as near as dammit to 10MB. this is it in Photoshop So it's 9.92MB. But this is what is shown when I select the folder it's in and to go list view (its the picture at the very top of list) / 1.9MB! Which is correct?
