Is there any way to select an entity by command prompt (without using mouse) so that it can be modified. Actually I need to do some modification to some entities using script and hence I need a way to access the drawing elements by command or kind of way without using mouse.
View 6 RepliesI am trying to understand how to select element of pick point through API.
I have found example in API manual, chapter "Interactive selection". Everything seems be clear but finally this example (and also others which I have found on web) doesnot work as I am expecting.
There is example:
Public Sub TestSelection() ' Create a new clsSelect object. Dim oSelect As New clsSelect ' Call the pick method of the clsSelect object and set ' the filter to pick any face. Dim oFace As Face Set oFace = oSelect.Pick(kPartFaceFilter) ' Check to make sure an object was selected. If Not oFace Is Nothing Then ' Display the area of the selected face.'''' there is cursor and content menu correct
[code]...
I am able to select face, during selection is cursor shown as arrow with plus symbol, content menu show correctly zoom and pan commands. Unfortunatelly when this selection is done and message box show the value, the cursor and content menu does not return to correct state. Cursor is still with plus and content menu with zoom&pan. I have found that problem is with messagebox, just before messagebox is shown the cursor and content menu return to correct state , but after messagebox is shown and closed, then cursor and content menu is wrong. Why?
Finally I need it for my addin in C#, is there and better way how to select item or input 2d point?
I use Inv 2013.
Im trying out the "Demo"version and now find some anomaly.
If i use in ACAD2007: With "PSELECT" and then "P" or "L" i could select the last marked Object/Selectionset. I had just to select the Object with the mouse. Now in ACAD2010, with this routine i can only select objects which i have selected in a command (before or within).
For example: Draw a few circles and lines. Then copy 3 of them. ESC. And select another few. ESC and then use PSELECT P and it marks the three which i selected to copy and not these i've selected with mouse!
The same in Lisp with: (entget(entlast)) . You aren't able to select those object which where only marked by mouse.I know; mostly you use a command with some objects and then use another with the same objects, and it works. But when you klick ESC or even in Script or Lisp you got problems, and its not very "proper" at all. Is this the new handling with the selection set: feature odr big?
I have a big problem with the viewport in 3ds max 2011/2012. On each viewport I have a black or white bars on right. these bar make the mouse become inaccurate for example when i want to select a vertex I can't drag the mouse on it and click. I have to move the mouse away from it a distance to select it (see my attachment image). I tried to update the graphic driver and the 3ds max 2012 SP1 but the problem's still there.
View 9 Replies View RelatedIs it possible to do a rectangle select without the mouse?For example, with the rectangle tool selected, one can fill in the fields in thetool options to specify the coordinates and size of the rectangle, but I can't see a way to actually commit the operation;I don't see a "do it" button at the bottom, or an option in the tool options menu. I'm looking to get a precisely sized selection to fill into an added space.For example, when adding a strip at the top of an image,I would like to grab the top 100 pixels,flip it vertically to create a mirror image,and paste it into the expanded canvas.
View 10 Replies View RelatedIn previous versions of PS you used to be able to press CMD (i'm mac based) and drag the mouse to select all the layers that are within the area you drag to.
This is great for sorting out files, grouping layers etc as you can lock/hide layers as you go. Problem now is that in Photoshop CC it also selects locked and invisible layers - which didn't use to happen so actually its completely ruined this method.
where I can't use the move tool with the mouse properly. I'll go and select a single item on a layer and then try to move it with the mouse (move tool). I've done this before and still do it all the time on Photoshop on my other machines. However, on my laptop it won't work. I grab the single object I want to move and the second I move it, it defaults to moving every single layer in my file.
View 3 Replies View RelatedAt first I thought it was a touchpad problem, but I discovered that three different optical mice have the same issue + a 4th optical mouse on a different computer also experiences this issue...
particularly when I am using the free select tool, the mouse movements start to get VERY jerky when I am going around corner after corner when my image is zoomed to 100% or greater on a 2500px or larger image, it lots of times causes me to mess up because it jerks around a lot... no other program has this issue, not even other programs where I need to get into tight corners with a mouse!!! this ONLY happens in Gimp!!! other tools have this jerky mouse movement problem to but is experienced mostly using free select!!! How do I fix this Gimp jerky mouse movement issue??? Gimp seems to be the only program with this issue!!!
how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
View 5 Replies View RelatedI followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
View 2 Replies View RelatedIn Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedI've just made the dramatic leap from AutoCAD LT 2005 to AutoCAD LT 2013. By far and away the environment in 'Classic" mode is very familiar and there are some new features. However, one item really getting under my skin is the hatch feature. In LT 2005 one could pick the points to hatch, if the item is closed or not, by individual mouse click points similar to how you can still check an area now. Is this hatch feature still available and I just don't have the new program configured properly or will I be forced to draw each item I want to hatch as a 'closed' element?
View 5 Replies View RelatedI cannot draw any elements from design pallet. Happens suddenly. Probably I accidentally switch something. In command line show command like:WallAdd and right away show another command line. Cannot add any doors or windows - same problem.
View 9 Replies View RelatedI have an attached picture of a design i am working on, I was wondering how to slope the curved element so that i meets the lower curved element.
View 3 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
I have an error that started appearing in my VBA programs since we upgraded to AutoCAD 2012. This problem never occured in our previous releases. The program is supposed to loop through all entities in paperspace and check for entities that are a acBlockReference object.
Below is a simplified version of my program. I get an Element Not Found error on the line noted. Again, this has never happened in any of our previous versions of AutoCAD. Just started with 2012.
Sub Test
Dim blkref As AcadBlockReference
Dim entry As Variant
For Each entry In ThisDrawing.PaperSpace
If entry.EntityType = acBlockReference Then ' <-This is where the Element Not Found error occurs
msgbox entry.name
endif
next
end sub
how to achieve Isolating a single element and Export the element alone as SAT File?
View 1 Replies View RelatedI’ve got a student version (AutoCAD for Mac 2013) , which I got from official website. There starting to appear few problems after a few months of my work.
1. when I’m doing a rectangle, lines that intersect or just lines that contact, in the point of connection appear small blue rectangles and windows of mistakes. If I trying to move only one element of this object, all others elements start to deform in chaotic way.
2. when I’m coping any object on the same page in one file, program start to buzz and I need to close the program despotic.
I'm having problems creating the element in DBTEXT BackgroundWorker in VB! Develop a function to create the element dbtext in the current document, when I use this function within <Autodesk.AutoCAD.Runtime.CommandMethod("")> it works perfectly, but when it is used within BackgroundWorker raises the point of different alignment indicated. And the problem is solved when you run the AUDIT command in the project, then the alignment points are corrected. The same problem is occurring for the blocks that have attributes, in this case the alignment points are also displaced the attributes of the standard indicated.
Public Function NewDBText(ByVal InsertPoint As Point3d, ByVal Rotation As Double, ByVal LayerName As String, ByVal ForceColor As String, ByVal AttacPoint As AttachmentPoint, ByVal TextValue As String, ByVal Height As Double) As ObjectId Try Dim DBTextBase As New DBText DBTextBase.Rotation = Rotation DBTextBase.Layer = LayerName
[code]....
Possible to move or copy an element e.g. viewport boundary from paperspace to modelspace and vice versa?
View 9 Replies View Relatedthe difference between a '3d solid' and a 'mass element' - or point me to a reference?
View 4 Replies View RelatedI have a problem that when I add elements to a layout view. These elements contain parts of my drawing and have an outline to them in the layout view. This is handy when working in the layou view, but they are also being plotted when I export to PDF. How can I make these borders disappear in the plots?
View 4 Replies View RelatedHow can I alternate the element selection if both elements are on top of each other? I tried to mouse click on the lement with alt or control keys but nothing worked.
Example. I drew a construction line then I drew the line I want to keep on top of it. Now I am trying to delete the construction line but the new line keeps highligting.
I have not come to a solution for creating DBTEXT elements within a BackgroundWorker, this element has problem with the alignment point. So there is an example ZIP, just run the command and check the elements created, you will see that I'm creating the element with the point in alinahmento MIDLECENTER but the result is not correct.
I am creating other elements in the same way and they had no problems (MTEXT, POLYLINE, CIRCLE, SPLINE, LINE, etc. ..), they are correct, but the element and the element DBTEXT block that contains attributes present problems in the alignment points.
Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies View Relatedmaster im new in autocad 2014....i have a problem now when i select line or object it highlight or make a broken line....but when i select the other object or line my previous selected back to normal..i mean i can select only one line if i use single selecting....how to select all object or line with single select continuously, except using hold left click...
View 1 Replies View RelatedI know that I can assign transparency to an element (even to an entire layer). But is it possible to apply transparency to an element on a GRADIENT basis? In the following image, I'd like to have the portion between the outer boundary of the gray shape and the red shape become more and more transparent. So that at the outer edge, you'd see NOTHING below the gray shape--but the closer you get to the red shape, the more you'd see through the gray shape.
View 5 Replies View RelatedI need to convert a polyline to a structural element and put it on a tool palatte. I'm pretty sure I got it into the Design Manager, now I need to make it a structural element. I used to know how to do it in Acad 9, but now in Acad 12 I forgot,
View 1 Replies View RelatedI'm trying to figure out a way to convert a 'Polyface Mesh' into a mass element or some other solid. The Polyface Mesh was created by importing a .3ds model using the '3dsin' command. The .3ds file was created from exporting the model out of Max.
View 5 Replies View RelatedI have a rectangular component pattern which started out with all components. As more structure was added around it I started supressing different elements to suit, now a piece of structure has gone thru element 1 but i dont seem to be able to supress it... is there an easy way to get rid of element 1 without having to redefine the pattern? (redefining causes me other problems)
View 4 Replies View RelatedThere used to be a product called Cadmin, that was a very useful tool for changing common elements in a group of door window assembly styles at the same time.
I have a source file with 870 door window assembly styles that I want to modify a division in. The division has the same unique name in all of the assemblies, and I want it to end up the same in all styles. Is there a way to do this that I am not aware of or do I have to select 870 styles individually?