AutoCad :: 3D Drawing And 2D Specs For Each Part?
Aug 19, 2012
I used it back in college a few years ago so I have some little experience. Not a lot since all we did there was just very basic 2D stuff in R14.
I was wondering if it's possible to have the complete design of a machine in Autocad? What I mean is: design every part to the correct scale, and then generate "views" for each part as needed (with measurements, projections, sections), in different sheets. Maybe even mount the machine fully and explode it.
I've seen the Sheet Sets, Flatshot and Sectionplane commands but I'm not sure how to use them.
View 5 Replies
ADVERTISEMENT
Oct 4, 2012
To create my new part, i used the deriven part of another part, and used only ‘Body as work surface’ before inserting in my new part.
When I create the drawing of my new part, why is it that I still see all the ‘Body work surfaces’ of the direven part?
When I make it on my other computer I dont see it... so it is surely an option…
View 1 Replies
View Related
May 8, 2013
I have a copy of an old plan showing curved boundaries which I wish to recreate in C3D. There's lots of connecting arcs, all of which are annotated like:
RAD 15
CHORD 21.213
121°22'15"
ARC 23.56
T.L. 15
I can see that the first line is the radius, the 2nd and 3rd lines are the length and orientation of the arc chord, the 4th line is the arc length. I've been able to get a correct result by firstly drawing the chords, then adding arcs with the appropriate radii between the two ends of each chord. However, I'm sure there's a quicker and easier way. Sometimes the arcs are separated by short sections of straight line which have length and bearing details as well.
Attached is a screen shot of a short length.
View 3 Replies
View Related
Oct 30, 2012
I am considering a MBP for all my photoshop work. Currently using Photoshop CS6
From 2007-2010 I had my old MBP (late 2006 model). Then in 2011 I was using the 2011 iMac, 2.5ghz, 4gb ram. I sold the iMac as I felt more comfortble with the laptop in terms of working anywhere and anytime. Also for some reason I just strangly enough found the iMac a bit sluggish compared to the smooth performance I had with my old MBP. I mean the iMac is fast, way faster than my old MBP, However I do think that it may have been due to the wireless Bluetooth mouse that I was using.
I run psd files that have a large number of layers and can reach a size of 3-4gb per file while processing and when saved and closed upto 2gb. I rarely use filters, but when i do, its mainly the blur filters and then sometimes the others.
15"
I am considering the 15" MBP base model but bump up the RAM to 8gb... I wish it were more than 8 though... and getting a SSD drive of 128gb... too expensive other wise and this is enough for my work files as I have 2 additional backups on external HDs.and VRam of 512gb with an anti glare display.
13"
I like the size & portability of the 13", but the lack of a dedicated VRAM is putting me off. I could always get an external display later if the need be, however what about VRAM... its shared right? How will that affect CS6 performance?
I would like to really bump up the RAM but the only option i have is 8gb. Also I hope to use this system for another 3-4 years alteast if it does not have any other issues.
View 1 Replies
View Related
Jul 24, 2013
How can I find the specs (time photo was taken, etc.) of a photo in CS6?
View 1 Replies
View Related
Mar 30, 2009
I am currently running a quad-care, 4 gigs, with a nvidia 8800gts 640mb graphics card machine and using photoshop cs4 extended with windows xp 32 bit os.
While photoshop cs4 is fairly fast and responsive, I would like to have it even quicker.
My question is, what would make this happen?
Naturally a faster processor (i7 intel) would assist in this, but I rather not go that route. I would rather go to a 64bit OS and add additional 4 gigs of ram (total of 8). What would your suggestions be?
Add the additional 4 gigs of ram and go to 64-bit xp? 64 bit vista?
Build a new machine with i7 quad cpus, 16 gigs of ram and 64 bit os?
Simply use what I got because there will not be much of an improvement?
I would like to have it run faster without a great deal of reworking the system. Clearly what I am running now is pretty darn fast even though it is a year old since I built it.
View 27 Replies
View Related
Jan 29, 2014
New "ad server" system I wil be using soon..
1.Spec preference is for 25Mbps .Is that achieved via Target Bit rate or Maximum Bit rate in the AME export settings?
2. Spec preference is 50i Upper field dominant.AME does not have that option.Is 25 Progressive effectively the same?
3. Spec preference is 4:2:2 (MPEG-2)No option in AME for that... so what does one do?
4. Any other MPEG 2 settings GOP N /M frames etc...for best results?
will be doing a workflow and pipeline test with faciilty. Just wanted a starting point.
View 21 Replies
View Related
Nov 18, 2008
I don't see a section for CS3, so I will post here.
As far as I am concerned I have been hammered for $2,400 for a crap program.
I would like to be proven wrong.
Perhaps there is something I can do to stop the continual freezes, crashes, inconsistancies that occur in every program in the CS3 Suite.
As this is the Photoshop section, I will stick to one major problem that discourages me from even opening anything on it:
It takes ages to open a simple 400x600 jpeg file.
Here's my specs:
-Intel Core 2 Quad (Q6600)
-3072 RAM
-2 Harddrives with over 300 gigs each (I'm only using one at the moment)
-NVIDIA Geforce 8500 GT Graphics Card
-Vista Home Edition
I am at the end of my rope here.
I'm considering backing up all the files (a 40 minute movie I've hair-pullingly, finally copied to DVD *couldn't use After Effects at all**the Interviews section wouldn't accept .gif images over the video**etc,etc.)and reformating the PC and installing XP.
Is this my only option, or is it Vista at all?
And I don't want to hear 'it works fine for me' or get some obscure link to some page with 100 FAQ that I'm expected to sort through.
Holy Jesus, twenty four hundred dollars for the privilage of re-visiting the '90s UI experience. woopie.
If you've ever felt my pain, and can help, I would be most appreciative.
I'm hoping it's a typical PEBKAC situation that can remedied by changing my Graphics Card or something.
View 5 Replies
View Related
Dec 15, 2005
Has anyone ever worked on cellphone wallpaper? I am looking for dimensions and file type/size specs for the TREO 650, Motorola v180 and Motorola Razr (v3).
View 5 Replies
View Related
Aug 15, 2007
I have some 3x5 glossy photos taken from about ten years ago. They are no longer in the best condition, and have dust specs and superficial scratches on them. Recently, I decided to scan them and was less-than-happy with the result.
For example, one of the photo's is of me and my friend against a blue-ish wall behind us. The entire scanned image, though, is covered in little white specs. I have black hair, but it looks almost as if i have dandruff lol. even the blue background has a bunch of little white speckles
I was wondering if there was a tool or filter or other way to remove some of the small white specs from the picture.
View 5 Replies
View Related
Jan 26, 2012
I am having an issue with a drawing, I have an assembly running in Inventor, the parts appear to be in a transparent mode, it is actually a translation from CATIA V5, everything seems to be ok, but when I open a drawing to create dimensions, only the parts that are not transparent appear in it.
View 4 Replies
View Related
Dec 21, 2011
I need to use 2 part list in my drawings. I have made the second part list in the style editor and saved it but how do I select it?
View 1 Replies
View Related
Dec 20, 2011
I have a sheet metal part with a fully dimensioned drawing made for it. I then make a mirrored (derived) part out of the original. Is there an easy way to get a fully dimensioned drawing of that mirrored part?
I have tried making a copy of the original parts drawing and then replacing the model that is referenced in the drawing but that just gets me a drawing with a bunch of pink dimensions and I have to drag all the dimension points to reattach them.
View 4 Replies
View Related
Jan 6, 2013
im using inventor 2012.im trying to put a part list on my drawings.but for some reason, the part list is using a Gost Form. ( diffrent layout and polish/ russian text )How do I go back to default.I have allready tried to reinstall inventor, no go.
View 2 Replies
View Related
Feb 27, 2012
Is there a way without deleting the part from the assembly to make said part not show up in the drawing? I need to be able to do this in the model and not in the drawing. Suppressing the part create a level of detail, but I would have to create new views in the drawing and I don't want to do that.
The part is used in some cases, but not in others so I don't want to delete it from the assembly.
View 9 Replies
View Related
Jul 10, 2013
I set up default tolerances in my part and would like to have them displayed in the drawing. I used the "Retrieve Dimensions" tool but they aren't showing up. I have the Tolerance Method set to Default.
View 9 Replies
View Related
Sep 24, 2012
I'm having trouble showing a reference part in an assembly drawing. When said part is set to "reference" it is no longer visible on the drawing.
View 9 Replies
View Related
Feb 18, 2013
I want to know if there is any api to check if a particular drawing is a assembly drawing or part drawing.
View 4 Replies
View Related
Feb 2, 2013
In solidworks, if I have several similar parts to draw, I can draw one part and annotate it and then to save time and effort I can save the drawing as one of the other parts and then change the part reference in the drawing as I open it up.
View 7 Replies
View Related
Aug 19, 2009
What would be best work flow for showing a part and having drawing for the different stages of machining, I would like to have a print with different sheets at say a lathe stage, than a broached part stage, then a milled stage. Should I do a part for each stage, just save to a different name or Start with a part from the first op, than derive it to another part, and make that part complete on second op, than derive it and make a third part, and so on.
Would like to do this, because we make special shaped part from round stock, so need print's to tell floor people rough blank form. Than mills machine it into final form from that lathe blank.
Similar to casted and machined drawing
View 8 Replies
View Related
Jun 21, 2012
I am trying to move a component within a part drawing, not an assembly. When I do "move bodies" it wants to move every extrusion within my drawing. If I click move face, then I have to click every face that I want to move (which is time consuming) and then it often times doesn't work? Sometime it works other times it just moves the origin indicator and doesn't move the faces I have selected.
View 2 Replies
View Related
Jul 11, 2012
Is there any auto generate command to retrive the part drawing from assembly drawing rather than open part one by one to retrive the drawing?
View 9 Replies
View Related
Apr 10, 2012
I am using Inventor 2010 and would like each view of a drawing to show a different machining step. I.e.. A rough cut dimension and then the finish cut dimension. Is it possible to create the part as it would be machined and then use the EOP marker to set each view. Would like to model one part and get all views.
View 9 Replies
View Related
Aug 8, 2012
Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
View 5 Replies
View Related
May 21, 2013
Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies
View Related
Jan 29, 2013
I am currently working on a product where I want to make 2 part lists in my drawing of the same assembly. The first parts list has to view all the parts that are always delivered with our product, and the second one has to show the optional parts and features that could be delivered with the product.
I want both lists to be categorized the same way (comments, material, name), I want the numbers of the list to be chronological (also I don't want the second parts list to start the numbering at 1) and I want both lists to stay connected with their balloons.
Is there any way this can be done, like adding or removing part links to the list manually?
View 1 Replies
View Related
Nov 7, 2013
I wonder if it's possible to see with ilogic if a part exciste in all others view (in assembly) of the same sheet?
View 9 Replies
View Related
Jun 12, 2013
Using the 'Run Other' rule I can run a rule to switch holes on & off in a part. The rule is in the part & the run other rule in the drawing. The drawing will only update once the part is open. I would like to see the part open when the rule is ran from the drawing, how can this be done?
View 3 Replies
View Related
Oct 13, 2013
If you've had to use different design view representation of the same PART on a drawing in multiple Views at the same time, you already know that whenever you suppress completly a feature, the representation loose the condition stated in the model view and if the suppressed feature is reactivated, it then appear in all view. You have to right-click on the view and select "Apply design View" to reset it, or re-select the design view representation in "Edit view".
Recently I faced a case where i had to build a iLogic multi-body part representing a crate made of either sheet or bar, with a removable top and variable solid for top, sidewall and base, driven trought a in-drawing form! Reason being the customer wanted a easy, useable model for the shipping clerk to generate a custom crate drawing for the crate contractor, therefore freeing precious time for the drafting departement. Usually I would have used occurence visibillity from a assembly, but the document management part of the deal, was too much for the computer illiterate user... So, off i went creating a multi-body part, only to face the aforemention problem with view changing representation due to complete solid suppression.
So here's How-to Set representation view for part in drawing:
The trick is to set every view to it's representation by using the edit window interface code.
The iLogic line to set a View to a specific Design View Representation:
ActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()
I use this code in "IF" statement. You must repete the code for each view, removing the "Raster" line force a raster only reaction on the view, and the update must be placed after each view, otherwise it only update the last one.
Example:
If TYPE_COUVERCLE = "AUCUN" Then
ActiveSheet.View("2").View.Suppressed = TrueActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("3").View.SetDesignViewRepresentation("View2", False)ActiveSheet.View("3").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("4").View.SetDesignViewRepresentation("View1", False)ActiveSheet.View("4").View.IsRasterView = FalseThisApplication.ActiveView.Update()
Else If TYPE_COUVERCLE = "CONTREPLAQUÉ" Then
[Code]...
I'm telling the model that the disapearing element "TYPE_COUVERCLE" is driving the representation, only when it change does it fix the view, regenerating or changing the Design View Representation (the TYPE_SIDE and TYPE_BOTTOM are always active or always suppressed in their respectives views, therefore not influencing their respective appearance in other view). If you had multiple dissapearing solid or feature you would have to build a similar code for every one of them...
View 1 Replies
View Related
Mar 3, 2013
when I try and plot drawings from autocad I only get half the drawing, sometimes just a strip of blank paper. This is for standard A0 drawings and custom oversized drawings. Plot preview is fine, the same drawings can be plotted by my 2 collegues. We all have the same computer specs, same program, same drivers, as a department we had new computers about 3 months ago. We use 2013LT. I can plot the drawings but it means using True View to open and plot the drawings (same computer, same drivers, but it works) I repeatedly asked our IT department and finally got them to look at the computer, the answer was "yeah, your right it doesn't work".
Autocad 2013LT
Windows 7 professional
View 5 Replies
View Related
Nov 5, 2013
I've got a view of a presentation in a drawing and one of the parts which is in a sub assembly.
I've checked the visibility in the presentation and the drawing and the assembly but all say visible.
Restarted the computer, but still no change.
see below a pic of the drawing, I've drawn in a red rectangle where the part should roughly be.
IV 11
View 4 Replies
View Related
