In Auto CAD 2007, if I want to extrude multiple objects, I can give reference length by pointing start and end(the obeject will extrude with positive value), but in 2012 I can’t use reference length. Sub-command “Direction” can use z-axis length only. How can I use like 2007?
View 7 RepliesI have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
I have two boxes stacked on top of each other. On the top I have a rectangle which I want to extrude down through the first box and partially through the second box and then subtract the extruded rectangle from the two stacked boxes. Extrude works fine, but when I use subtract it only removes the area from the first box. The bottom box remains solid despite having "extruded" the rectangle down through the bottom box as well.
I've tried joining the two boxes into a single object before using extrude and subtract, but for some reason the join command won't work in this case.
Is there any way in inventor to use one extrude cut feature on two different solids at the same time?
View 9 Replies View RelatedI have one layout. On that layout I want to have 2 viewports. I also have ssay block A and block B I want to insert.I would like Viewport1 to display block A and viewport 2 to display block B.
What happens to me is when I created Viewport 1 and inserted block A. I go on to create viewport 2. But viewport 2 displays only block A, which I cannon delete to insert block B.
I'm trying to extrude multiple faces, and then get them to rotate along the center of the object so that they can all sort of have the same angle radiating from the center. In the picture, the one on the top Left is my starting point. I would like to rotate those faces, for example, so that they will all be flat (picture on Right which I achieved through vert snapping to grid) but the only results I can produce are the 2 small pictures on the bottom. =(
Is this possible?
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies View RelatedJOIN command has the option selection and merging several objects at once, but I can not join more then one line.
View 7 Replies View RelatedI am exporting a design for 3D printing, and it includes multiple objects. If I save each part as a separate STL file, and assemble them in my 3D printer software (Object), the alignment of different parts is lost.
If I save it as a single STL file all the objects are grouped, and I cannot select them individually to assign them different properties.
I am using Autocad 2012 student version, and it does not allow me to select any option at the moment of exporting the files.
I've been having trouble selecting more than one object with the pointer. the program was just reloaded on the computer, but this problem has happened multiple times now. everything will work fine for a while, then suddenly, when trying to select objects during a command, i can only select one. (ex. trying to copy multiple lines, i can only select one to copy at a time).
View 9 Replies View RelatedI would like to return multiple objects from a function. can it be done? and how?
function DrawLines()as object
objline1 as new line
objline2 as new line
[..]
return 'objects'
[code]....
I have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:
AREA = .14 sq in
PERIMETER = 1-11/32"
Everything is on the same layer, color by layer and are at the same elevation.
Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.
the issue is when i try to publish multiple dwg files which containing civil 3d objects including data ref to pdf it won't do it other whatever drawing is currently open.i kinda can see why. because the data ref reading is not programmed in when "invisibly" opening the cad files. xref are autocad native and it works.
so no warnings or anything. just publish the first one and told me it's done. i've seen this years ago when first started using civil 3d but then i just never complained here.
is there a solution for this? what i did before was obviously open each drawing. then publish, huge waste of time. making me hate my job because of repetative tasks. i almost always try to automate.
yesterday made a program to make one surface for each csv file there was hundres of them and basically 2 hour programming and 1 minute to process the files once got the program working.can read subfolders to find csv file too.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
Is there a way to allow Inventor 2013 to copy multiple objects when executing the 'copy' command ? Similar to in AutoCAD where you can continue to copy objects in multiple instances instead of it terminated after a single copy ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I'm using QSELECT to select all objects on a layer, sometimes I need to select objects from 5-7 layers.
Right now I use QSELECT, select 1 layer, click OK, open QSELECT again, select another layer and repeat. Is there a faster way to do this without scripts?
I'm sure some of you do site drawings, how do you measure a curve? Some restaurants or cafes have a rounded serving counter, how you measure the radius to plot into autocad?
Is there a way to align multiple objects along the same axis as the further most object? As an example, to have the right side of three boxes line up with the right side of the box furthest to the right.
View 9 Replies View RelatedAny good script that allows you to align multiple objects to a line? I've found the ALIGNIT.lsp, but it's not working in Autocad 2012.
It's like this:
I have a horizontal line. Above it, there are +200 objects. They are aligned in the right rotation already, but I just want to move all the objects lower line to my horizontal line.
If you can use the ALIGN command to align multiple text objects in the Y-Axis? (or X-Axis as well)
I know about changing the X value of a bunch of text objects to align them that way. I'm just wondering if the ALIGN command will allow you to do something similar?
I want to do this without lisp too. If there are other methods I'm always wanting to learn! I just had a new cad user ask me about the ALIGN command and I couldn't get it to do it.
Is there a way I can break multiple ojects at once? For example, I have a row of consecutive circles (shrubs on a landscape plan) that overlap. I would like to elminate just the overlapping portions.
View 2 Replies View RelatedI have always been able to highlight separate objects in model space, and now i can only do one at at time??? I click on the second object, and the first one stops being highlighted.
I don't know if somehow i changed a setting on accident, but i don't know how to get it back to be able to do multiple separately.
I have this problem with my drawing. before I decided to post here, I first ask mr. google about the problem but to no avail. anyway, here's my problem:
I have this drawing. 3d object. with multiple items. and would like to create a 2d detailed view of the items.
what i did was isolate the first item and did the base view command. after the command, I then hid the first item and isolate again the second item. but then I always get this pop-up menu that says "A model has changed" and my item is missing. I ignored the warning and poceeded with my second model and so, on. after the process I unisolated all my items and most of the drawings are there and some are lost. Is there a proper way of doing this base view for multiple objects without disrupting the previous drawing that I objects?
I can not remember how you do this QTO seems to only let you pick one object at a time surely there.
is a faster way crossing windows does not seem to work within the command.
My question is, if there any tool /command, utility in autocad to select all objects of one type at one time : for example all text objects or all dimention objects if these objects on different layers and have different properties. in my work I have to insert many blocks(not annotative) or parts of drawings which were created by other people and have different from mine settings and properties of text and dimention objects. the insertions add so many layers and objects that I spend lots of time to correct them and to figure it out.
is there any way( command, utility) to select and manage all of these objects at one time?
P.S.i think it is very unconvenient that the plain autocad does not have dimentions and text as families or some sort of groups that s easy to manage.
I don't seem to be able to select multiple objects at the same time, it is probably a setting that is wrong somewhere but can't find it.
View 2 Replies View Relatedcan't select multiple objects with the grip, it work previously until someone change the variables.
View 4 Replies View RelatedI want to be able to select all my viewports in all my layouts at the same time. Is this possible? Qselect only catches objects in the current tab.
View 9 Replies View RelatedI was wondering if there is a way to edit single line text when there are multiple objects selected. I have multiple text which need their justification edited but there are non-text items amongst them. Instead of clicking on each of them I would like to just select the area and then edit the text as required.
View 3 Replies View RelatedThe below adds a hyperlink to the selected object.How might it have to change to add multiple hyperlinks?
(entmod
(append (entget (car (entsel)))
(list
(list -3
(cons "PE_URL"
(list
(cons 1000 "..\..\90 Submittals\90-3 O&Ms\fig83-clevishanger.pdf") ; Relative Path to a pdf file.
(cons 1002 "{")
[code]...
My autocad crashes when I'm working with many similar objects. As the roof shingles. Even when creating a block with all objects, when passing the cursor over the block cause the system to crash (its even worst this way). It seems that the program attempts to process each tile individually (further these tiles are rounded).I've been working with large roofs, such as 9mx4m.
View 5 Replies View RelatedIs there a way - or 3rd party app or lisp- to change the width of multiple Mtext objects all at once? I have several drawings where the width of all Mtext objects is 1.25, and I would like to change all of them to 1.
View 8 Replies View RelatedHow to modify this routine so that I can select multiple objects as opposed to one at a time?
(Defun c:cd ()
(setq newdim (entsel "
Select Dimension to clear:"))
(setq newdimvalue " ")
(command "dimedit" "n" newdimvalue newdim "")
(princ)
)